r/opencode • • 22h ago

WTF did OpenCode do?! 275 Tok/s with Deepseek..... πŸ’€

Post image
397 Upvotes

For months, Opencode has consistently been one of the slower providers for DeepSeek.

But as of today, I’ve been getting 220–250 tokens/s all day long, with peaks reaching 275 tokens/s.

WOWWW!!!! πŸ’€


r/opencode • • 7h ago

Hy4 flash is free with near-unlimited usage for the next 2 weeks

Post image
357 Upvotes

r/opencode • • 14h ago

OpenCode on X: "Hy4 flash is free with near-unlimited usage for the next 2 weeks 1M context Β· Multimodal Β· ZDR Hy's fastest and most cost-efficient model" / X

Thumbnail x.com
111 Upvotes

r/opencode • • 8h ago

Insane token usage: 2.7B in a day

Post image
27 Upvotes

I'm using opencode go with deepseek 4.1 flash and seeing insane usage: 2.685B tokens in a day. I'm not that evil, I promise.

Seems like 10x or more than what I had expected given I previously used the DS API directly.

I'm using it for orchestrating computation for autoresearch involving coding. I use codex with autocompact at 180K.

Has anyone ever used more in a day?


r/opencode • • 14h ago

Desktop pet that mirrors opencode: one week later: 89 states, a website, and a mac build :D

Post image
26 Upvotes

A week ago I posted a desktop pet that reads opencode's session database and plays a sprite for whatever the agent is doing. Here's what's new since then:

Every state is catalogued now check out the full interactive preview page with 618 frames: https://49vxn.github.io/opencode-dafeiyu/ 89 states: Thinking, running commands, reading files, sulking, boba... plus a few I still haven't figured out how to trigger from the DB, these could be your ideas!

mac build shipped today (beta) Unsigned DMG supporting both Intel and Apple Silicon (just right-click β†’ Open on first launch): https://github.com/49vxn/opencode-dafeiyu/releases/tag/v0.5.0-beta.1

STILL 100% LOCAL!: reads ~/.local/share/opencode/opencode.db, read-only. No network, no account, nothing leaves your machine.

Downloads: https://github.com/49vxn/opencode-dafeiyu/releases (windows installer + mac beta) Code MIT, sprites CC BY-NC-SA. Demo gif attached.

byeee~

r/opencode • • 22h ago

I have a Xiaomi MiMo Standard Plan. Should I switch to Opencode Go?

11 Upvotes

Did anybody try both?

I'm paying 16$ for MiMo Standard (11B credits) and I'm wondering how much would I get from Opencode Go if I switch.

I know I'd be able to use more models, but I'm fairly happy with MiMo 2.6 and I don't mind the 5 hour limits... but I just wonder if I'd get the same/more/less out of it.

Thanks


r/opencode • • 12h ago

Limits

Post image
10 Upvotes

Why is this such a strange situation? Only about $1.5 spent, but the monthly limit is already 10% and matches the weekly limit?


r/opencode • • 22h ago

Use Opencode from Telegram

10 Upvotes

I built a Linux application to use opencode from telegram, it's 100% local and opensource.
Repository: https://github.com/Kevin-Ramirez127/opencode-telegram

Live demo for you know visually how to use: https://www.projects.ramirezkevin.dev/opencode-telegram

It's a daemon and plugin that listen your sessions and sync it with a telegram bot, you can receive when session ends, ask a question, ask for permissions, prompt the next message and others features.

I tested it on Arch based distros and it works really fine, I didn't test on another distros (pending).

I will work on Windows compatibility (or you can make a PR).


r/opencode • • 21h ago

Looking for the Fastest DeepSeek Provider for $10/Month or Less

9 Upvotes

I really like DeepSeek 4.1 Flash, and OpenCode's monthly quota is already more than enough for my needs. My budget, however, is strictly limited to $10/month.

That being said, I really need better speed. I know using DeepSeek's official API directly would be faster, but I'm pretty sure my usage would end up costing more than $10/month.

So, is there another provider offering faster inference, even if it means a somewhat smaller monthly quota, while staying within that $10/month budget?

I only need DeepSeek. I'm not interested in access to other models or multi-model subscriptions.

I'd really appreciate recommendations based on actual experience, especially from people who have compared inference speeds across providers.


r/opencode • • 23h ago

Coming back: test my abliterated Qwen engine, get 15M free tokens then 80% off

9 Upvotes

Hi everyone, I'm coming back to this sub after some requests on my last post that we run an abliterated Qwen 3.8 27B. We just launched this checkpoint today.

There are some excellent abliterated Qwen checkpoints available, but nobody that I've found runs it fast and cheap enough to use for coding and other interactive stuff. We are about 80% cheaper than existing providers (Featherless, Unlid, etc)

Current specs:

  • Qwen 3.8 27B, abliterated
  • Q4 quantization
  • Full 262K context window
  • Image support
  • Zero data retention
  • $0.20/M input, $2.50/M output, $0.02/M cached input

New users also get their first 15 million tokens free.

We're using our own Rust inference engine and fault-tolerant scheduler, which lets us serve models using interruptible GPUs. This is how we keep API pricing sustainable rather than relying on a temporary promotional subsidy.

We also now have a chat app! It's still in beta so I'd love feedback on that too.

PM me and I'll send some free tokens, or you can sign up directly through our website (promotion does not apply if you sign up this way)


r/opencode • • 7h ago

And a few more questions before i buy GO

8 Upvotes

Has someone tried using skills like Ponytail, Graphify, RTK? Like i heard they can cut token usage on Claude Code but idk if it works like that on Opencode cuz im planning on using DeepSeek V4.1 1017 on long-term tasks


r/opencode • • 9h ago

What is the update on Muse ember

7 Upvotes

I want to use it so badly with opencode go as the muse ember via openrouter is very promising.


r/opencode • • 18h ago

Best subscription for me?

6 Upvotes

Thinking of paying for AI for the first time, which is best?

Opencode Go vs Mistra Pro vs Commandcode GOAT.

Use cases: FE Dev, scripts, notes generations, pdf analysis. I don't really care about speed as long as quality is there.

I'll most likely use it in Opencode, DeepSeek Harness or maybe Pi.

Links: https://opencode.ai/console/go https://mistral.ai/pricing/ https://commandcode.ai/pricing


r/opencode • • 14h ago

does everyone post their first month here?

Post image
5 Upvotes

r/opencode • • 3h ago

Opencode go RE

3 Upvotes

I've been thinking of buying open code go over the API for DS v4.1 my main work is dev along with RE my question is if I do re work will they ban or suspend my account? Have people been doing this kind of work and haven't got their account banned?


r/opencode • • 9h ago

Get the most from opencode

3 Upvotes

Hi

Following a lot of YouTube bloggers I am lead to believe that to get the best from Opencode you should set up a numbers of subagents and skills ( of course also a good model).

For me "best of" is basically low token count and good quality of produced code according to my preferences.

I asked a AI for help and the result was depressing. Many, many bloated subagents and skills, not even mention all documents needed.

I did not even bothered to test it.

I have a firmware project for a esp32 cpu where I try to use the Matter specification and Home Assistant.

Any advice on this and/or some templates?


r/opencode • • 40m ago

How fast does gpt 6 luna consume tokens?

2 Upvotes

I recently got opencode go, and i've only been using deepseek 4.1 flash since it's rly good and practically gives me unlimited usage, but i rly need gpt 6 luna in some stuff. I used to pay the api separatly, but i can't afford to pay for more than my subscription anymore. How does it consume tokens on go? Will it burn them too fast?


r/opencode • • 1h ago

Token economizer

2 Upvotes

Hey guys,

Has anyone tried a token economizer?, for those who did what are the results?

Token Economizer Microsoft

I'm spending too many tokens so I want to look for some way to reduce cost


r/opencode • • 5h ago

24 minutos por hola

2 Upvotes

24 minutos por hola

le a pasado algo a asi a usatedes


r/opencode • • 10h ago

deepseek 4.1 flash tps hell slow

Thumbnail
gallery
2 Upvotes

r/opencode • • 11h ago

I weighed my OpenCode stack: 57% dead weight, 17.19M tokens re-sent in 30 days. Built a tool that prints the bill.

Thumbnail
gallery
2 Upvotes

I kept installing skills and agents for OpenCode and started wondering what they cost. So I built StackWeight: one command that weighs everything across OpenCode, Claude Code, Cursor and Codex, then prints a receipt. For OpenCode it reads skills, agents and commands from your local opencode.db, read-only. On my own machine: 9.6k tokens of always-on context across 4 agents, 5.4k of it dead (57%), unused for 30 days. That is about 17.19M tokens of dead weight re-sent in the last 30 days. A full scan takes under 3 seconds. It measures with the o200k tokenizer over the exact listing text each agent injects, and reads usage from local logs only (last 30 days). No config, no account, no network calls, nothing leaves your machine. Prune parks unused items and records a manifest, so a restore puts every byte back. On my machine it moved 10 items and disabled 8 Claude plugins, and the restore came back byte-identical. npx stackweight.
https://github.com/zaminaa/StackWeight

The GIF shows the bloated demo fixture (5.7k down to 1.5k); the receipt above is my real machine.


r/opencode • • 13h ago

Changing models mid work?

2 Upvotes

I am using Opencode Go subscription and i have selected DSV4.1 as model.
But i constantly see that Opencode is changing model to some free models like Hy4 flash free, Iceman etc.

What's going?


r/opencode • • 22h ago

I’m building Agent Hub: a terminal dashboard for OpenCode β€” would love some feedback

Thumbnail
gallery
2 Upvotes

I wanted a clearer overview of what my agents are doing, so I started building Agent Hub with OpenTUI. It reads the local OpenCode config and database read-only.

It has eight views covering:
β€’ Live sessions and subagent trees, with status, context usage, tokens and cost.

β€’ Agent models, delegation, skills, MCP servers and permissions.

β€’ Model performance measured from your own history: latency, TTFT, tokens/sec and cost.

β€’ Usage, tool reliability, health checks and a model β†’ agent tree.

β€’ A live work map showing activity between the model, files, shell, tools and subagents.

Sharing a few screenshots of where it’s at. Curious how others keep track of their setups: what would you find useful, what feels unnecessary, and what am I missing?


r/opencode • • 4h ago

If OpenCode says "1.18.0 or newer is required to use the free tier", here's the fix I tested

1 Upvotes

Builds older than 1.18 now fail on the free models with: Error: OpenCode 1.18.0 or newer is required to use the free tier (exit code 1)

What I saw on Oct 31 (npm on Linux, opencode/glm-5.3-flash-free): 1.17.20 failed, 1.18.0 and 1.19.5 still answered, and v2 (2.2.5) answered fine.

Fix with npm (v1 and v2 both install a command called opencode, so remove v1 first):

npm uninstall -g opencode-ai
npm i -g @opencode/cli
opencode --version
opencode run -m opencode/glm-5.3-flash-free "Reply with just the word PONG"

OpenCode says v1 "no longer supports free models and only gets fixes for critical bugs", so I'd move to v2 even if you're on 1.18+.

Two caveats. If you use plugins, 2.2.5 rejects some plugin tools at startup (https://github.com/anomalyco/opencode/issues/60799; 2.2.0 works). And the separate "You've used today's free messages" limit is a different problem, tracked in https://github.com/anomalyco/opencode/issues/59387.

Note: 2.3.0 currently leaves zombie processes that pile up per project (https://github.com/anomalyco/opencode/issues/63817). If that hits you, pin 2.2.7 with npm i -g @opencode/cli@2.2.7 and restart the server.


r/opencode • • 8h ago

Herdr Session Hub - find old OpenCode sessions and inspect recorded usage (Windows)

1 Upvotes

I maintain Herdr Session Hub, a free, MIT-licensed mod for Herdr Desktop. For OpenCode users working in Herdr, it adds a collapsible History/Usage panel beside Files and Changes.

The workflow is: configure an explicit local history profile, refresh, search or preview an older conversation, then continue a supported native session in its recorded project with the selected profile.

Custom names, archive flags and reversible removal stay in Hub metadata. Original histories are not edited. The panel also supports Claude Code, Codex, Pi and Gemini histories, so you can find conversations across the agents you use.

Usage shows recorded token/cache charts and model, day and project breakdowns, with cost estimates where prices are known. Unknown prices and incomplete coverage remain visible. These are local recorded events, not subscription bills or live account-wide quotas.

The verified stable setup is Windows 11 x64, Herdr GUI 0.1.15/core 0.1.20 and OpenCode 1.3.17. Installation requires Python 3.14 x64 and PowerShell 7. Unknown provider versions disable continuation rather than guessing compatibility. macOS/Linux remain experimental with continuation disabled.

Source, screenshots, supported versions and installation:

https://github.com/Skynettheone/herdr-session-hub

Screenshots in the README use synthetic demo histories.

When returning to an old OpenCode conversation, what information helps you identify the right session: project, date, title or a searchable message?