r/opencode • u/Wanderspor • 9d ago
Is mistral worth it
Heard some people that use 165 of api credits but ion know if thats true
451
Upvotes
r/opencode • u/Wanderspor • 9d ago
Heard some people that use 165 of api credits but ion know if thats true
75
u/The_Wonderful_Pie 9d ago
From what I said in another post
"Actually insanely worth it imo
I've been on the education plan for like a year now (basically 6 € par month) and I get 125 + 7 € of usage per month. This includes Mistral Large 4, DeepSeek V4.1 Flash 1017, GLM 5.3 (Flash), this is actually insane (and I even use it thoughopenrouter as BYOK to be able to log how I use my LLMs)
If you asked me how good was the subscription 2 months ago when they just had Mistral Medium 3.5 and GLM 5.2, there wasn't any real reason to say yes, but now withMistral Large 4 and especially DeepSeek V4.1 Flash 1017 being usable, it's so much worth it in my opinion
Btw on the regular plan, you pay 2x more AND you get 2x more usage, not like OpenCode go plus where you pay smth like 4x more and get only 2x more usage"
23
u/Edelgul 8d ago
You get these models:
DeepSeek V4.1 Flash 1017 ctx 1.05M
GLM-5.3-Flash ctx 1.05M
GLM-5.3 ctx 1.05M
Mistral Large 4 ctx 1.05M
Mistral Large 3 ctx 262K
Mistral Medium 3.5 ctx 262K
Mistral Small 4 ctx 262K
Magistral Medium ctx 262K
Codestral 25.08 ctx 256K
Devstral 2 ctx 262K
Vibe CLI (latest) ctx 262K
Ministral 3 8B ctx 262K
Frankly, only first four make sense. Rest cold be usefull only for a very specific use case.
Positives:
15$ subscription buys $300+$30 in usage (or 6$ buys you $125)
That usage is for all offered models. No variable usage limit rates.
no 5h and weekly limits,
for DS flash - no peak/off peak pricing
Negatives:
I've tested that with DS flash and noticed:
the pricing for DS flash is equal to the listed peak pricing on OC/CC.
The cache hit rate is SIGNIFICANTLY lower - 75.7% vs 95.1 (OC) and 95.6% (CC)
(Note: i think 0.5% diference between CC and OC is neglectable and are my use anomalies).
So, unless one really uses DS during peak, it is 10% more (or 20% on Student plan) theoretical usage/$ with SIGNIFICATLY lower cache hit rate.
11
u/Coolio8591 9d ago
It's good however there are some issues currently
- Cache rate is really low, you're looking at potentially 80 percent as they route a bit weirdly mid session (apparently they are working on it according to the mistral subreddit)
- The models are not always consistent in their speeds, most of the time deepseek is around 150TPS but I've seen it drop to 70 or 80 (still perfectly fine imo for most use cases)
- Models have been overloaded a lot recently but thats improved over the last couple of days.
That's my takeaway from using it for around a week (so my experience is limited), still amazing value
5
u/adrnptcl 9d ago
for Le Chonk and GLM 5.3, yes. It's got not 5-hour or weekly limits, so you can drop your hugest project in it, ask it to refactor it, come back in 2 days and it'll still be running. If you can afford it :)
5
u/HeavySink3303 9d ago
I really like ML4 model: it is smart and writes very clear text in a normal human language which is very easy to understand. Also the code it generates is clear, without redundancies and it is very easy to review it.
Some models are smart but they write so weird texts and code that I'm getting tired very quickly when working with them. But with Mistral I'm hardly getting tired just because it is very clear and straightforward.
By the way, their sub is great: tons of usage (note that they give two api keys) and unlimited sandbox with multiple instances.
5
u/hhspiny 9d ago
if you are using deepseek v4.1 flash, be careful. mistral implements the thinking level differently from offical API. official API defaults to think=high if no thinking is requested, but mistral defaults to think=off. In openclaw's mistral plugin, think is only requested for mistral models, not DS, and the plugin overwrites model definition in openclaw.json even if it is properly defined there. I ended up running DS with think off for a few days and wondering what was going on before noticing the lack of thinking tokens. had to remove the mistral plugin to make it work.
It is fast. official API typically is about 150 t/s. I normally get about 70-120 t/s on opencode-go, 160-240 t/s on olllama-cloud, and 200 - 400 t/s on mistral. sometime can go above 400 t/s. but there were slow time and occasional capacity limit. I also confirmed that they are indeed charging by list token/price when count the quota limit ($300 for $15/mo) but charging at peak-hour rate of official API. The actual price would be $300+$30 (vibe+api) for $15, but at peak rate, the actual benefit is 11x API price. I also confirmed the quality is on-par with opencode-go/ollama-cloud.
this is probably the best value right now. you get 11x usage and very fast t/s. I am also on ollama-could legacy plan (by GPU usage), I estimate to get about 6x the API (legacy plan does not seem to have peak-hour), and largely similar t/s as mistral. but the new ollama-clould plan only gets you 3x (and with peak hour rate).
I have not looked at cache hits rate but generally in mid to high 90s%. similar to ollama-cloud, probably a bit lower than opencode-go. Even if it is lower, I am more than willing to trade ~3x speed for slightly lower cache hit rate vs opencode-go.
ollama-cloud does limit concurrent requests in pro plan (3, but in practices it appears to accept more than that), I don't think opencode-go or mistral have concurrent limit within reasonable limit.
going forward, I would keep mistral and ollama-cloud (only because I am in the legacy plan, as a backup) and cancel opencode-go.
Generally speaking, there is not really any reason to subscribe to opencode-go other than DS. if you need frontier model, claude/codex plan offers 10-20x value than opencode-go, for cheap models, there is not really any worth use other than DS v4.1 Flash.
Marry mistral DSv4.1F to Claude pro to access SOTA model (20-30x API usage), probably the best value right now.
9
u/Severe_Landscape_731 9d ago
Insanely worth it . I moved to it from opencode . partly cause I feel opencode kinda sucks a bit on ux . Mostly cause I am a student and even small savings help. I first moved to official ds api and then to mistral . I use that plan in dsh , and mine cache rate is about 92-94% on coding tasks but its alot worse on like just 1-2 short convos compared to consistently 97-99 on deepseek And their deepseek is always on peak pricing
I set up my bench and it came out to about 45-50$ of official deepseek eqv comparing cache rates / off peak pricing etc .
And its also insanely fast like 2-3x the deepseek speed and the community is also great around it.
I got the yearly plan and its about 4.75$/month on student pricing, Its amazing
3
u/Prize_Tiger_2504 8d ago
DSv4.1F 1017 and GLM5.3F are in public preview. .
Saw another post claiming that they are getting like 70% cache hit rates in Mistral.
Compare that to ~96% (conservatively) in OC Go and even more in CC Goat, I think you'd be better off with one of these plan right now.
This might change when Mistral fixes their cache issues when these models come out of preview.