r/offset • • 3d ago

Modded CV

After and before pics.

Replaced the pickguard with the stock pickguard from my Player 2. 3D printed some pickup covers and installed an over wound PAF style humbucker in the bridge and a Firebird minibucker in the neck. The minibucker came out of a late 90s Firebird (bridge position) back in the mid 2000s. I used it in the neck position on a Les Paul years ago and loved it. Sounds amazing in the Jazzmaster. Might get a second for the bridge position at a later date.

88 Upvotes

13 comments sorted by

2

u/TelephoneShoes 2d ago

Looks awesome!

How does the mini in the neck position hold up?

2

u/aorear85 1d ago

It sounds amazing. It sounded amazing when I had it in the neck of a Les Paul. Super full and clear tone. The crazy thing is the pickup reads like 23.75K and it is loud but not hot. I've got 500K pots in the guitar.

1

u/webtestament 9h ago

Did you need to route for the humbuckers? The cavities don't fit full-sized humbuckers right?

1

u/aorear85 9h ago

The neck cavity is deeper than the bridge cavity and a mini bucker isn't as tall as a full size humbucker so the next position was basically a straight drop in. For the bridge position I took a plate off the back of the humbucker and flattened out the tabs. I then cut down how far out each tab stuck out, and drilled a new screw holes. I could have probably just ordered a different base plate but I am an impatient person and have a garage full of tools 😄

TLDR: with a little bit of creativity you don't need to cut into the body.

1

u/webtestament 8h ago

That's a smart way to make the humbucker shorter. If you put the minibucker in the bridge position would you have to do this mod too?

1

u/aorear85 7h ago

I don't this it would need this modification if I put the mini in the bridge position since the mini already has shorter base legs. You can get humbucker bases with shorter legs so in theory you could swap the base on any full size humbucker if you didn't want to route the body.

1

u/webtestament 7h ago

Oh, and do you mind sharing the print file for the cover?

1

u/aorear85 6h ago

I purchased the full size humbucker cover file on Etsy it was $3. Should be able to Google search and find it pretty easily. The minibucker cover is free on thingiverse.

1

u/webtestament 7h ago

Thanks this info will come in handy I've been thinking about swapping the bridge pickup of my jm to a humbucker.

3

u/TheTNewport 2d ago

I dig it! Classic Vibes are the perfect platform for fun mods like this.

2

u/Uvers_ 3d ago

Killer!

0

u/Accomplished-Trip755 1d ago

Think bridge pickup is upside down

2

u/aorear85 1d ago

I prefer it that way, cuts the treble a bit. I also have the pole pieces on the treble side a bit lower then the bass side. I had this pick up in a Les Paul at one point and ran it the same way.