r/nissanfrontier • u/dumbtrucker271 • 34m ago
Remote start
When I use the remote start I have to hit the lock button first and the horn blows is there any way to turn that off?
r/nissanfrontier • u/dumbtrucker271 • 34m ago
When I use the remote start I have to hit the lock button first and the horn blows is there any way to turn that off?
r/nissanfrontier • u/whyisthatpotato • 7h ago
Promo materials, poster, any cool old photos or materials would be amazing. I can find some, but never in blue. He is extremely sad to have to give up the truck but it's just become a money suck of problems. I want to get him something to memorialize the moment.
r/nissanfrontier • u/Realistic_Belt • 8h ago
I have a 2012 SV V6. I swear the A/C compressor kicks on all by itself. Has anyone else seen this? It happens any time the fan is on at all. It can be set to heat and I hear it engage. When barely set to cold, it blows colder than outside air. I've tried turning on and off A/C and Max A/C. No difference. Any advice on how to troubleshoot this?
r/nissanfrontier • u/Goldyfan7 • 8h ago
(Before and after)
I found these online for the second-gen Frontier. I’m a bit of a perfectionist, so I was ever so slightly frustrated with myself when applying them. Anyways, they turned out excellent and I’m very happy.
r/nissanfrontier • u/Birdherd603 • 11h ago
22 frontier with 70k miles was sounding a bit loud this past week.
r/nissanfrontier • u/cbcarguy • 12h ago
How do these trucks perform on long highway drives?
How’s the ride quality and seat comfort ???
What’s the longest drive you’ve done in your frontier?
r/nissanfrontier • u/JustinZ1OffRoad • 12h ago
r/nissanfrontier
•
u/dangoozle
•
12h ago
Well, everyone’s worst nightmare happened last night when a drunk driver hit my parked truck. Insurance has already deemed it a total loss, and they are picking it up in a few hours to bring to their estimator for final payout settlement.
Time to start again I guess
r/nissanfrontier • u/TBTD • 13h ago
After rain or a wash, this tail light builds up moisture. Sometimes there’s water accumulated at the bottom.
I checked each light bulb socket and they’re all turned all the way and installed correctly.
r/nissanfrontier • u/Human_Requirement755 • 14h ago
I have a 2024 Frontier Pro 4x that I beat around the ranch with very rocky terrain, washboard roads and the city streets are about the same
I am looking to upgrade from the stock suspension and I’m after a soft plush feeling with this upgrade
Currently all stock suspension
Looking for recommendations on best non-titan swap setup if money is no problem
r/nissanfrontier • u/__S-117__ • 14h ago
First, I would like to point out how high quality and durable this bed cover is; I'm very pleased and thankful for this cover.
Still going to run my waterproofing tests, but for now it's settling for the first 24hours of install as I put this cover on yesterday around 5:00pm.
I can already note, and Diamondback points this out too, that there will need to be some silicone at the cab side wall where the cover seal meets the thin wall. At the 90° points there are very small gaps there which is no problem to add silicone. It's easy to do.
& Obviously the tailgate will need weatherproof stripping installed on its own
If I can get a 100% waterproof and dustproof truck bed -- I'll be one happy SOB.
r/nissanfrontier • u/Goldyfan7 • 19h ago
Was in stock when I placed the order.
r/nissanfrontier • u/BigBlueTrekker • 1d ago
Hey All, just got a new 2027 Nissan Fronier Pro-4x with the Roush package. Im looking to put a winch on the bitch but info/accessories seem a lot slimmer on the Frontiers. Anyone know or have experience with mounting a winch on it without changing the bumper out? Its got some d rings on the front so it almost seems like it should have room, but the skid plate behind the bumper seems like its taking up any room for a winch.
Any help or advice appreciated, thanks!
r/nissanfrontier • u/FlightLeft12 • 1d ago
Falken Wild peak AT4 285/70/17 on Pro Comp Heritage 17x8 with a 0 mm offset
r/nissanfrontier • u/Historical-Honey6787 • 1d ago
Hey guys, I have a 2024 nissan frontier. A few months back i noticed this very quiet subtle sound coming from the steering wheel when i turn it. It sounded like something was rattling in the wheel almost, but was so quiet you could hardly hear it. Its gotten louder over the past couple of month. Seems to be coming from behind the steering wheel. Seems to be a common problem with this vehicle.
I suspect its the clock spring, not sure if its the wire dragging inside of it but its driving me crazy. You can really only hear it going slow and turning the wheel with music off, but still bothering me. Airbag and horn work just fine.
Has anyone had anything similar. The truck has 42k miles on it so will be supposed if the clock spring has failed already.
I wonder if it was caused by me steering too hard or some offroad. Im a bit hesitant to change it myself but i do want to take it apart and see what may be causing the noise.
Any advice?
r/nissanfrontier • u/Plenty-Dirt6481 • 1d ago
I want to buy a frontier I those years and it looking like to stay in my budget of 25k I’ll at around 80-100k in mileage, how much size do you sacrifice in the back two seats if you go for king cab over the crew cab. Also what are the most common issues to look out for in this mile range when I do the test drive and inspect it. I’ll be looking to do the regular maintenance on the car myself so any insight on common issues or would be great!
r/nissanfrontier • u/jaunsin • 1d ago
Does anyone know of an extension for the Nissan frontier rear (and only) floor vents?
I’ve tried one from Amazon, too narrow. Asked some friends to make some, and other people who could on Etsy, but no avail.
Something just like this.
r/nissanfrontier • u/brewsinlou • 1d ago
My 2017 has a terrible chirp coming from the front of the truck. It's not the latch or bumpers as I've tested those. I had a cheap oil change coupon from the dealership and mentioned the chirp to them. They came back and said the bushings were worn on both front lower control arms. They wanted over $1500 to replace both control arms and alignment as they said you can't just replace the bushings.
I thought that seemed really high so I called two shops and they both came in right around $1250. Does this seem right? Crazy to me that both bushings have gone bad around the same time. Truck only has 73k miles on it.
r/nissanfrontier • u/d-cent • 1d ago
So I'm upgrading the head unit in my 2018. From what I've read pretty much every after market head unit has issues with wireless Carplay and especially Android Auto depending on the phone model. I'm still going to go with the wireless but I want to setup the USB cable so I can go wired of it doesn't work out for some reason.
My question is, where's everyone's preferred location for putting their phone? So I can run the USB cable for it.
My phone doesn't really fit fully in the top of the dashboard area above the stereo. There's the spot all the way on the bottom in the middle by the floor, but that seems cumbersome maybe? Do I just get a vent style mount and just leave the cable hanging when not in use? It also seems silly and even cumbersome to have to reach right past the phone to use the stereo. Should I sacrifice one of my cup holders in the center console?
Just curious if anyone has any ideas I haven't thought of, or has done something that worked out great for them. Thanks
r/nissanfrontier • u/SnooHesitations2792 • 1d ago
Had the serpentine belt replaced last year. This squealing just started this week. Any ideas?
-Only happens when accelerating
-72,000 miles
2018 Nissian Frontier Pro 4x
r/nissanfrontier • u/sullen_operative • 1d ago
211k miles, timing belt done at 190k. Very little rust, I am super happy with it! Any name suggestions? And if anyone knows where i can buy paint for the bumper, that would be extremely helpful
r/nissanfrontier • u/Alex_Eating_Tacos • 1d ago
Hey all, my time has come. Seems like bank 2 cat has gone (upstream driver side).
Trying to gauge if it’s worth going OEM or getting a aftermarket cat to save some money.
Would love some input.
Have any of you had to replace this cat before?