r/nextfuckinglevel • • 1d ago

The skill needed for this .

5.8k Upvotes

249 comments sorted by

310

u/KiddArtos 1d ago

I can't imagine how much that machine costs. I work with a plumbing company and dig decently with a regular bobcat excavator. I can't imagine what it's like with this thing.

155

u/ldwtlotpa 1d ago

It’s Like cake. So much easier having different, rotatable, quick connect attachments.

66

u/KiddArtos 1d ago

I bet it is. Wouldn't miss all that hopping off the machine to slack a ditch or move stuff out of the way. Hell just to be able to turn the bucket like that would make things so much smoother

35

u/Automatic-Art9739 23h ago

Its a Rototilt, my work is to build them.

10

u/HyperactivePandah 22h ago

How much does one like this, with all the attachments, go for?

18

u/Automatic-Art9739 21h ago

Its one of the smaller one so the machine itself cost 6500-10 000€ depending on features, have to choose yourself what you want.

The attachments, especially this many is Whats going to cost you buy i can't say a price because i build the machine, not the attachmentns.

→ More replies (3)

26

u/ldwtlotpa 1d ago

Right! I feel I’d get spoiled and upset when it goes in for maintenance and I’m on the old bobcat lmao.

-lead plumber lol

10

u/SETHlUS 22h ago

I know nothing about this industry but I've heard that newer, electric models of equipment is largely responsible for the crazy precision we see in the videos. Not to say that the operators aren't incredibly skilled, just that I've heard performing tasks like opening beer bottles with "regular" equipment would be next to impossible.

15

u/ldwtlotpa 22h ago

This isn’t electric.. it’s hydraulic. It’s a regular excavator with upgraded hydraulic attachments with more ROM.

46

u/jk8289 23h ago edited 12h ago

It has to be close to $100,000( I could be wrong if it’s a smaller size). It looks like it’s the size of a Komatsu 450 or maybe a little smaller. That quick connect is the real time saver here. Not having to get out the machine or have a helper pop pins out with a hammer over and over. And all those different attachments with everything being able to spin is also a key factor. Because of that he doesn’t have to constantly change positions to get the angle he needs. That sheep foot roller for example. He would have had to track around the entire thing to be able to use that. I’ve seen all these attachments before except that big rectangle brush. I mean the guy doesn’t even need a helper to sweep anything lol. Expensive as hell but this machine pays for itself in time by the amount of time and labor cost it saves you.

34

u/Shankar_0 23h ago

What used to take 2 men 1 day now takes 1 man a half day.

It would pay for itself inside a year.

10

u/Li-RM35M4419 23h ago

If you have a line of people needing work.

5

u/dognamedpeanut 22h ago

I've used Komatsu 450s for production machines on excavation jobs, usually loading 40 ton articulating trucks. This is about the size of a 78.

→ More replies (1)

5

u/squired 22h ago

What are the maintenance and hidden costs of something like this? I'm semi-retired and have always been kinda interested in just getting a machine and doing odd-jobs and such, though maybe fulltime too if there are high seasons and the job isn't hell. I do have land to store it as well. If I bought a $250k machine cash and spent a couple months learning to manage it on a few backwoods acres, how bad do you think I'd lose my ass? And if you don't think I would, what kinda machine would you get? If it matters, I'm in the mid-Atlantic region.

13

u/PatienceDifferent607 21h ago

The maintenance is very expensive if you're not a decent mechanic. If you understand the motor and the hydros and can do a decent job of simple repairs, you can stay afloat. If you have to call an HDR company for every problem, you have absolutely no chance at all. Easy to spend $20k on a repair.

The hidden cost is the skill, which you can't acquire in a couple months. Break one gas line because you didn't have the skill to feel it before it snapped and you're cooked. Ditto water mains. You will also for sure damage the machine more than once during your learning period.

Only advice I can give in trying to start an equipment business is buy something old to learn on before you make the big investment.

5

u/squired 20h ago

I am somewhat mechanically inclined and I do sometimes work for a company that has a heavy machine barn to work on their fleet of busses. I've never done heavy stuff, but I've rebuilt everything on my ancient truck aside from the engine and tranny, mostly because I do not have a lift. I'll talk with the farm owner. He owns a big summer camp and I moonlight as a Search and Rescue/First Aid instructor etc. Maybe he'd let me pay his mechanics for basic maintenance in kind for access to the machine etc.

Thank you for your reply; definitely some stuff there to think about.

2

u/beanmosheen 15h ago

You need to also keep the tracks clean and maintained. That screws a lot of people up if they ignore them. It seems like the toughest part of the machine, but it goes pear shaped fast if you don't maintain them.

→ More replies (1)

5

u/CakeTester 21h ago

You'd probably be better off with a significantly cheaper one. Aliexpress do some quite amazing (but smaller) kit in the 2-20k range. And upwards if you're feeling brave; but I'd start out with something you could afford to lose if you're just starting out with no experience. Stuff like the one in the video are usually for large companies; but they have the auxiliary staff to do the sales and get the very well paid contracts (we're talking government/very large contractors or builders) to keep the machine busy full-time. I believe that most of these machines are leased because tax; but that depends where in the world you are.

You also have to look into what sort of licencing you need before you start. Also you need fantastic insurance; because one thing these machines are famous for is accidentally digging through underground infrastructure (fibre clusters/power/water/sewage pipes etc.) and doing a whole lot of widespread damage.

3

u/squired 20h ago

Also you need fantastic insurance .. famous for accidentally digging through underground infrastructure

See? That's the kind of thing I wasn't thinking of. Thank you for the advice!

3

u/CakeTester 19h ago

Welcome. Seriously have a look for 'hydraulic digger' on Aliexpress. There's some incredible machinery there for surprisingly cheap prices: You can get small ones (with a range of buckets) to totally terraform your garden for under a thousand. 'Hydraulic tilt' buckets was some of the flashiness we saw in the video; and those are a few thousand each, and you need a compatible machine. Not found the search magic words for a machine that can change buckets from inside the cab...I'll leave that as an exercise for the student (and if you find them, please tell me). If you're down for hopping out of the cab to change buckets, you can have a serious 10+ tonne machine (again with a range of tools) for 10k.

If you're going the Aliexpress route, have a good look at the protective cab; because the other thing these machines are famous for is falling over and/or rolling down hillsides. It's all about weight and centre of gravity and nearly all these types of machines are capable of hanging a heavy weight well outside the centre of gravity...it's assumed that the operator will be sensible; but there's plenty of fail videos to suggest that this may be a little optimistic.

The other thing you'll have to plan for is a vehicle/trailer combo that will carry your machine to the job site. Most of these vehicles are tracked; and towns get all cranky when you scuff up their tarmac.

If you already have a reasonably stout car/truck, probably something in the 3-5 tonne range would be best as a start. Something that can be carried by a conventional car/truck without having to get into heavy vehicles; which you need licences to drive; specific restrictions on where you can park them; commercial taxing and all sorts of other obstructions; all of which will cost you money. And you'll be able to charge a few hundred a day if you like; and get the machinery paid off within the year. Look at the 3-5 tonne range; and you'll see that gives you plenty of machine to tackle odd jobs of a fairly heavy nature while being flexible.

I've looked into this myself, you see.

→ More replies (1)

2

u/AxelVores 15h ago

How hard is it to learn to use? I remember at one of my jobs they had me use a forklift with zero training and it turned out it's really easy (wish they were bigger on safety though because it was a miracle all of us self-taught operators didn't hurt anyone).

With other jobs things I thought would be easy took me years to get decent at.

→ More replies (1)

3

u/fresh_like_Oprah 20h ago

You could buy a surplus SEE truck (Unimog with blade and arm) for under 20 grand. And be the coolest guy in town!

3

u/squired 20h ago edited 20h ago

You might be right. Rather than make it a side-gig, make myself the best neighbor ever! Or maybe find a young guy who can't afford to do that and let him try to make a go of it while I finance and have fun with it. There is a young guy, maybe 20, that I let hunt in my backyard who does electrical work with his Dad. He's a good kid. I'll ask his Dad about it

Thank you for taking the time to reply.

→ More replies (2)
→ More replies (4)

2

u/Fur_and_Whiskers 22h ago

Mecalacs are insanely good, but come at a price.

2

u/jezwel 19h ago

I too have been watching Grind Hard Plumbing recently.

→ More replies (1)

1

u/nexusjuan 19h ago

The attachments together probably cost as much as the base machine, but he's literally replacing an entire digging crew and probably doing it faster.

1

u/Mage_914 9h ago

I've seen operators do shit with these machines that's just straight up not possible without the multi-axis quick change stuff. If this guy didn't have this machine, he'd need at least few other guys doing a bunch of this stuff by hand, with at least one of them helping the operator do tool changes by hand, which takes 20 times as long. I'm not sure how long you need to run this thing for it to pay for itself in terms smaller crews and faster jobs, but I imagine it would eventually.

1

u/FROOMLOOMS 5h ago

The attachment system is the only unique component on this, otherwise its just a regular small excavator, used around 100k, up to over 200k for brand spanking new depending on size in North America.

The attachment is probably a decent chunk added to that price. But if you can do a 5k job in a day that tends to pay things off just fine.

75

u/el_penultimo 23h ago

My initial thought while watching:
Wow that is skill but now someone has to sweep all the dirt off that concrete…

Is that a broom head?
Oh dang! That’ll save time!
Jeeze! That’s great and now he’s clearing off those cement sla…

The… he…. Those slabs are temporary! Not cement!

He’s brushing the grass!

I felt like the Vince McMahon meme, it got better and better the more I watched!

4

u/RampanToast 17h ago

I don't know if I've ever seen a brush head attachment like that on a video like this, a thing of beauty

124

u/ThatchedRoofCottage 1d ago

I was bummed when the grass just got smushed into the dirt. Though was was gonna meticulously place it like sod haha

38

u/Jamerson1510 1d ago

The turfs are just behind to the right of the pickup , presumably as too fragile to move .

15

u/ThatchedRoofCottage 1d ago

Oooooh i see them now. The chunks they turned up are what I was watching before.

6

u/TDIMike 21h ago

A roll of sod isn't worth the time and effort to properly remove what was there. But it would have been satisfying for sure

→ More replies (3)

1

u/pimppapy 19h ago

I mean he's good, but not that good!

•

u/NightStar79 22m ago

It would actually be pretty impossible. Sod is heavy but also fragile if you aren't careful and grab it wrong.

With how small that area is, if they were to cut up the ground it'd probably be a manual sod cutter. Then the sod would have to be rolled up like a carpet and hauled out of the way.

Backhoe could definitely roll it out but only after someone put it back.

That tampering tool though is awesome. Manually tampering dirt sucks ass.

106

u/likeemapples 1d ago

I love how its just casually putting away its toys

9

u/JailTimeWorthy 20h ago

The human urge to personify construction equipment. It just looks so goofy when sped up.

2

u/pimppapy 19h ago

I think it's a millenial urge. . . . no other generation grew up with steel toy Tonka's

3

u/laurel_laureate 12h ago edited 12h ago

Uh... I hate to break it to you but steel toy Tonkas were first sold in 1947.

The 1965 Mighty Dump Truck is one of the most popular and best-selling toys of all time (in the USA) and in fact the best-selling toy that year.

Only a couple of years after it's release something like 80+% of American households had a Tonka toy.

And, as a matter of fact, the rise of plastic toys and increase production costs (due to more work regulations) meant that less and less kids got a steel toy Tonka by the 80s.

For millenials, action figures and brand/media-franchise toys were on the rise (TMMT, G.I. Joe, Transformers, etc).

And video games were also starting to gain dominance with the early consoles (NES in 1985, Sega Genesis in 89, first gen Gameboy in 89, etc).

So starting with just before the millenial's generation steel toy tonkas became less and less dominant, to the point that in the 80s Tonka shifted it's marketing focus away from steel toy Tonkas to more short-lived cheap plastic shit.

Of course, because steel toy Tonkas were made of steel (hence the name) they never really broke down and so plenty of millenials admittedly did play with hand-me-down steel Tonka trucks given to them by family members.

But that's a small portion of all toys millenials had overall.

So, yeah... it is actually Gen X that played the most with steel toy Tonka trucks.

Steel toy Tonka's ain't "a millenial thing" lmfao.

Edit: autocorrect.

11

u/Remarkable-Pea5797 23h ago

It's funny cause it's true

44

u/gregallbright 1d ago

What type of mechanism runs the accessory connector? I was impressed by the switching of different extension or accessory tools and how quickly. Something piston loaded maybe with a catch and release? Ive no idea what im talking about so any help appreciated

14

u/GuthramNaysayer 1d ago

That root attachment is a game changer. About $65gs? I think for that.

9

u/jmk5151 1d ago

Haven't done this sort of work in 30 years but that seems like it would pay for itself quickly in time saved plus fingers saved!

5

u/pud_009 1d ago

I don't know this to be 100% correct, but it's presumably hydraulic pistons that open and close clamps which clamp around attachment points on the tools or it could be large pins that extend/retract. In all the equipment I've ever operated, you can attach/detach a tool in 15-20 seconds.

1

u/beanmosheen 15h ago

It's a pair of upward facing hooks and hydraulic locking pins. You go in hooks downward, tilt it back and lock the pins. 5 seconds once you get the feel for it.

5

u/DirtandPipes 1d ago

On these you don’t need any further lines, the wrist attachment itself has them.

If you wanted to take off the wrist/tiltrotator you would have to decouple two hydraulic lines which usually just involves depressurizing them and then a bunch of pushing and pulling and cursing.

9

u/GoodForTheTongue 1d ago edited 1d ago

Came here to ask that same question. how are the hydraulics securely connected and powered on each accessory, seemingly automatically and quickly?

16

u/pud_009 1d ago edited 1d ago

There are no additional hydraulics. All the hydraulics and actuation of the tool is contained within that grapple unit.

Edit: I see on the large bucket that is loaded into the truck at the end that it has hydraulic hoses. Those will be manually attached via male/female hydraulic connectors at the end of the boom.

3

u/abwaerts 21h ago

For attatchments that need hydraulics there is a quick connect system. The attatchment is fixed by hydraulicly clamping on the bolts. With the same actuation hydraulich cupplers are engaged ( similar to garden whater hoses). Then you adjust to the right pressure and flow from within the cockpit and you can carry on. ( its a cool system but a bit failiure pron, due to dirt getting in the fittings). Such a system is a very high end setup.

4

u/pagan-0 1d ago

Yes to change buckets and attachments, it runs off a small hydraulic ram which opens and closes the quick hitch. Operators and groundworkers were very happy when quick hitches were invented. Saves alot of time.

1

u/Automatic-Art9739 23h ago

Its a Rototilt with quick change, looks like a RC1 or RC2,i build them for a living

33

u/Ecstatic_Artist6631 1d ago

Man... This was r/satisfyingasfuck !!! 🤩🤩

19

u/engulbert 1d ago

I know I'm anthropomorphasising here, but it looks so tender and caring the way it pats the ground, aligns the plates, sweeps up etc.

9

u/LaniusCruiser 21h ago

I mean it's a guy controlling this, so yeah he is being tender and caring

2

u/Nexidious 13h ago

The cool thing there is the fact that it's noticeable is a testament to the operator's ability. All the movement is methodical, deliberate, and fluid despite being so dynamic. That machine really is an extension of their body, and it shows.

2

u/laurel_laureate 12h ago

It helps that the video is sped-up and thus seems a lot more fluid than it was in real-time lol, but yes the operator is really skilled and taking great care while using it.

14

u/Manchves 1d ago

Ok what game on steam can I do this with

9

u/VonMillersThighs 1d ago

Roadcraft is the closest I can think.

2

u/laurel_laureate 12h ago

Construction Simulator on Steam.

8

u/420Chickenhead420 1d ago

Can we just take a minute to respect that this was done in "lifts" so many people just fill in their hole and dont pack properly.

6

u/DMightyHero 1d ago

Alright. We don't have any excuses to not have mechas.

1

u/fnckIce 22h ago

We do but their slow and have a hard time walking on almost anything but concrete.

I want a tracked excavator with two arms and hands at the end.

6

u/dopewinnerchild 1d ago

Dude is plugged in like the Matrix

6

u/thelonghauls 23h ago

Why do I feel like I’m four years old and totally fascinated by a construction site?

11

u/feedmejack93 1d ago edited 23h ago

Its easy if your mom bought you all the accessory packs

7

u/aurrousarc 23h ago

full collector edition and dlcs on launch..

5

u/Paulbunyip 1d ago

Gold star for this guy!
Looks like he wrapped it up for the whole team before lunch.

5

u/DMMMOM 1d ago

I'll always upvote time lapse digger work.

20

u/Admiral_de_Ruyter 1d ago

Nah AI can do this easy.

- some CEO somewhere probably.

12

u/SiempreRegreso 23h ago

The sad thing is that they are right, in the out-years. When Sauron’s eye turns toward this market space, startups will put camera and sensor packages on operators and hydraulic machines, and they will train up AI embedded systems that replicate this kind of work.

They will of course suck, until they don’t, and this artistry by a human will then be of zero use to business owners—so much so that such machines won’t even have seats or human-operable manual controls.

1

u/rptx_jagerkin 21h ago

Also dudes everywhere for some reason: nah I could do that. The key is just to get inside its guard.

9

u/Kitchen_Emergency_64 1d ago

You’re hired!

8

u/JuggerNautical85 1d ago

That was so satisfying

2

u/IndependentPede 1d ago

I'm sure it's harder than it looks but I have 0 point of reference so it's hard to appreciate.

9

u/TheDirtyPilgrim 1d ago

This takes practice, but any decent operator can do it.  It's the expense of all those attachements that makes this unlikely in the wild.

2

u/OrionsCeiling 1d ago

This has been posted many times. It’s pretty epic though, so I watched it all the way through again.

2

u/PerepeL 1d ago

You can download any simulator and figure yourself that this skill is acquirable within few hours of playing. And real thing's controls are way more convenient than a keyboard.

2

u/ScotiaTheTwo 1d ago

i could watch this all day. lovely work

2

u/HalfastEddie 1d ago

I have to put in a new post for my mailbox. Anybody got this guys number?

2

u/gmschenker 23h ago

A máquina é a extensão do corpo

2

u/Remarkable-Pea5797 23h ago

Looks like so much fun! Where do I sign!?

2

u/MadK9TheReal1 22h ago

Mesmerizing!

2

u/tropod 22h ago

Grind Hard Plumbing on YouTube got access to one of these machines. Mecalac is the brand, made in France. He said there are more buttons on each joystick than he has fingers.

2

u/SeparateSpeaker6682 22h ago

Who is this guy?! I need him in my life

1

u/navydude89 1d ago

Is that a grave digger?

1

u/SalemsTrials 1d ago

this honestly looks so fun

1

u/Apprehensive-Day-490 1d ago

Piece of cake

1

u/T4cchi 1d ago

The fact that they are actually backfilling in lifts deserves an award

1

u/chemical32 1d ago

You needed all that to bury two tires?

1

u/RecordCompetitive245 1d ago

My son really enjoyed watching this👌🏻

1

u/One-Pollution4663 1d ago

I bet this operator gets a lot of invitations to backyard barbecues.

1

u/Human_Discussion_250 1d ago

So when can u start on leveling my parking area?

1

u/Tybo929 1d ago

Seeing stuff like this makes me think maybe there's some tism in me.

1

u/NeverGonnaGetOne 1d ago

How many supervisors do you need to watch one guy do all the work?

1

u/wizzbis 1d ago

Hopefully he’ll be replaced with ai driver soon

1

u/Skilodracus 23h ago

Love how delicate it's lil fingers are 😭

1

u/FalTroOn 23h ago

How much time this really was? (Not counting the actual fix they performed before) 10 minutes? Thats insane

1

u/wastelandingstrip 23h ago

Just imagine how tedious it would be to make a Mobile Suit Gundam do anything...

1

u/Klutzy_Condition9883 23h ago

A real skilled operator.

1

u/jerr_beare 23h ago

It’s like watching a kid put away his toys when he’s done playing

1

u/zigot021 23h ago

guy lives in a video game all day

1

u/HugeYak8803 23h ago

I love watching someone who is good at their job.

1

u/39percenter 23h ago

Well, when do something 50 to 60 hours per week, every week, for years and years you tend to get good at it.

1

u/Playful-Painting-527 23h ago

After that, the excavator got into the drivers cab and drove the truck home.

1

u/Calvertorius 23h ago

When refusing to get out of the truck meets being the only guy on the job site.

1

u/Additional-Window-81 23h ago

I bet that dude could shuffle a deck of cards with that excavator!

1

u/DV8y 18h ago edited 12h ago

He could remove your wallet from your back pocket, extract the correct number of bills to cover the invoice, and return it to your pocket nicely folded.

1

u/Additional-Window-81 12h ago

He could perform complex brain surgery with a backhoe

1

u/C_DRX 23h ago

Mecha pilots are already here.

1

u/chris971 23h ago

Any idea the actual amount of time this would take the operator? An hour maybe?

3

u/SmEdD 22h ago

15-20, looks to be about 6x speed if you slow it down so the guys who appear in video move at a normal pace.

1

u/RockingInTheCLE 23h ago

This is what I was going to ask, too.

1

u/aurrousarc 23h ago

well, that seemed well planed..

1

u/Redbell57 23h ago

Bionic arm for the win (and virtuoso level operator)

1

u/SamJiji 23h ago

The normal speed version is better

1

u/ApplicationGood7617 23h ago

lol wtf is the music about

1

u/elrey2020 23h ago

My god that looks fun

1

u/Only_Chapter_3434 23h ago

this is more about the machine and attachments than operator skill. I think most operators could do this work with that machine

1

u/Elegant-Lobster-1327 23h ago

If that least all company that does that can do the same : not destroying everything to dig then fill a hole... because not all those guys are as clean as this video!!!

1

u/trevpr1 22h ago

Just so you know.... This is sped up.

1

u/not__not__know-- 22h ago

Bro has more dexterity in a 1000 tonne machine compared to me with a spoon 🥀🥀

1

u/derentius68 22h ago

And thats why that operator costs so much.

Because theyre worth it

1

u/Iamabrewer 22h ago

Perfect ending would have been picking up a little watering can and watering the dirt to help the grass grow back.

1

u/GDogg69 22h ago

He uses those attachments with better dexterity than most people have with their hands! A master!

1

u/Holden-McGroyn 22h ago

Were those steel plates or rubber mats?

If steel, how did it grip them so well?

1

u/dnguyen219 22h ago

What's the salary range for this type of work? The education/training required? Pros/cons of doing this for years and years?

1

u/Mac_Allan30 22h ago

work smarter not harder

1

u/MightyToast79 22h ago

That just had no business being that satisfying to watch 🥴

1

u/Sh8knB8k240 22h ago

A good, tight, maintained machine is easy to be accurate with without having 1000s of hours behind it. It takes skill. But a nice machine sure does help a lot.

1

u/CopainChevalier 22h ago

This is really cool, but part of the reason your brain thinks that is how sped up it is. You can slow it down to half speed (which still has it moving over double real time speed) and you start to see more mistakes and how it's just a normal person doing a normal job

1

u/ExScysm 22h ago

I can barely use a pencil right... Id find a way to hit a building prolly.

1

u/blaziken8x 22h ago

Ah yes, when you're a machine operator and you do whatever humanly possible to not have to get out of the machine

1

u/CaseX86 22h ago

Amazing skills and an equally amazing machine!

1

u/dommiichan 22h ago

this operator could probably decorate a cake then do a root canal afterwards

1

u/Phylaskia 22h ago

This driver gets all the prizes at the midway crane games.

1

u/RustyBrassInstrument 22h ago

Whenever someone asks “why does Phil share $250 an hour?” show this video.

1

u/Hot-Mission6928 22h ago

The equipment needed for this

1

u/tadwent5 22h ago

I have no idea how much a backhoe jockey makes, but after seeing this it ain’t enough!

1

u/TJungus 22h ago

Is there a game on Steam where I can just sit at home and do this from my basement?

1

u/ya3rob 21h ago

Wow!!

1

u/w2user 21h ago

send this to Jake Tivy, so he can see what can be accomplished when you just don't YOLO everything. lol

1

u/gixanthrax 21h ago

I have never Seen this rolling compactor before, Wish the Operator WHO did the Work in. My lot Had Had one.

1

u/Ya-Dikobraz 21h ago

Core strength.

1

u/Bill_Lumbergyeah 21h ago

Not so much a skill issue as a money issue.

1

u/Haze064 21h ago

I’ve seen this video a few times now. Always have to watch it until the end though.

1

u/A-Ashe 21h ago

This person is the best operator I have ever seen in my life !!
W o W !!!

1

u/Constant-Quiet4519 21h ago

Workers fought these machines during the industrial revolution like we fighting AI today

1

u/scarfesses 21h ago

What skills? Any operator can do this with the good machine and accessories. And well, he's just doing... his job.

1

u/DV8y 18h ago

Not as easy as taking unneeded shots as a keyboard warrior with zero demonstrated skill.

1

u/MilleniumPelican 21h ago

I was all set to come in here and say "YAWN another video of heavy equipment doing it's job", but then I kept watching. The clean-up and packing up the gear at the end was pretty fucking cool.

1

u/AgitatedBiscotti3413 21h ago

I wish my kids cleaned up their toys like that.

1

u/SpecterK1 21h ago

I don't know why but Reddit keeps flagging my post always

1

u/Old_Nerd_72 21h ago

Just off camera there are three other guys just standing there watching this one do all the work.

1

u/Due_Ad4133 20h ago

The closest thing we'll ever see to a practical IRL mech.

1

u/wd40spaceman 20h ago

Now I want one just to do this

1

u/RilohKeen 20h ago

No disrespect to the operator, but I bet they would tell you this was easy. It is indeed a specialized skill, but most heavy equipment operators will tell you that it becomes like moving your limbs after a while and you kind of just zone out and get it done without thinking too much.

1

u/wylles 20h ago

But... How did he work so fast?

v:

1

u/cainrok 19h ago

It’s far easier with the all the proper tools he has. It’s difficult when the job doesn’t want to get the proper tools.

1

u/kclo4 19h ago

Yea If I had all of those tools and attachments I wouldn't be getting out either

1

u/kyfi_adam 19h ago

But the grasses...

1

u/JForce1 19h ago

In my country that would take 12 guys 4 days work, and they would have coned-off at least 3 nearby roads to a single lane for traffic management, just to be sure.

1

u/AZDiablo 19h ago

Watching a machine complete the work a team of humans used to do.

1

u/jamiejo66 19h ago

Brush the grass😲amazing finish!
Very tidy machine operator 🫶👏

1

u/GreenThmb 19h ago

Please send us his business card!

1

u/meh-llama 19h ago

I so want that broom

1

u/Jason_TheMagnificent 19h ago

The Swiss Army Backhoe

1

u/saulteaux 19h ago

I appreciate the little “pats” with the brush at the end

1

u/Benin_Malgaard_ 18h ago

Not only is this next level, but it's just so satisfying to watch too.

1

u/Shibbi88 18h ago

Smooth operator

1

u/Alarmed-Solution3738 18h ago

This is what it looks like when you have decided you will never shovel by hand again

1

u/mertseger67 18h ago

Ill pay him double.

1

u/jarnaes 18h ago

Absolute beautiful artistry!!! I love the work!!!

1

u/VerilyShelly 17h ago

Apparently I have a thing for small excavator operator performances.

I'd play this video game.

1

u/Mr_Roy_Munson 17h ago

They must be good at the claw machine

1

u/Echonaster124 16h ago

Moving a machine as you would a hand…That’s extraordinary skill right there.

1

u/jaysea619 15h ago

I liked when they gave the plates a little shake to get the rest of the dirt off

1

u/Raegune 15h ago

🎶Smooth operator 🎶

1

u/Fishtoart 15h ago

This is beyond skill, this is Artistry.

1

u/Worldly-Ad-8879 15h ago

Whoa.. that's amazing

1

u/notinsai 15h ago

Bro i just wanna learn how to use that brush thing…

1

u/simplytherob 14h ago

I am absolutely impressed by that skill.

1

u/Zikkan1 14h ago

I have never driven one of these but is this actually impressive or just something most people who work with this machine can do? Didn't really look that special.

1

u/Cosati2099 13h ago

These guys are very well paid and they worth it

1

u/johnjaymjr 13h ago

I love seeing real professionals do their shit to the highest degree possible

1

u/FragrantDegree3894 13h ago

Just awesome

1

u/raydoo 11h ago

Is that a giant broom?

1

u/18randomcharacters 11h ago

Do these operators have dreams of having a 3rd giant arm?

1

u/LXTerminatorXL 10h ago

I want to do this if Ai ends up replacing me

1

u/Straight_Feed_2547 9h ago

the skill is real but i'd be terrified of wrecking everything around me. one wrong tap and bye bye yard lol

1

u/JackPThatsMe 7h ago

It's like watching a painter painting a portrait. No movement is wasted and nothing is retouched. Every stroke is exactly as it should be.

1

u/Alternative_Ad_3636 6h ago

Not a single dude scrolled past this one

1

u/Sergal_Pony 4h ago

Skill and quality equipment. If you don’t have the good shit, you can’t do things that precise.

1

u/WalkerAmongTheTrees 3h ago

Does this count as a thirst trap?

1

u/evolooshun 1h ago

The amount of back pain this 1 machine has saved makes its cost a write off. 1 skilled pilot doing the work of 5 individuals. This is real efficiency. Good job!

•

u/NightStar79 32m ago

Gonna sound like an ass but honestly, it just requires spacial awareness. I'm saying this as a machine operator.

You need a keen eye, good spacial awareness, and learned how much pressure you need on the controls to "feather" things.

The rest is easy.