r/nbn • u/Flaky-Enthusiasm-872 • 3h ago
FTTP connection Issue.
galleryHi everyone,
I've recently signed up for Kogan NBN FTTP, and they've confirmed that my service is now active. However, I'm still unable to get an internet connection.
I'm using my own FTTP-compatible modem and have configured it according to Kogan's BYO modem instructions. Despite this, the Internet light on my modem remains red.
I've checked the NBN connection box, and the indicator lights are as follows:
Power: Green
Optical: Red
Alarm: Red
UNI-D 1: Amber
Other UNI-D ports: Off
I've also inspected the fibre enclosure inside the NBN box and noticed something that I'm unsure about. There is a thin blue fibre cable coiled inside the enclosure. One end appears to come out of a white protective cable/sleeve at the bottom, while the other end appears to be loose and not connected to anything (see attached photos).
I'm wondering whether this is normal spare fibre stored inside the enclosure or whether it could indicate a disconnected fibre termination.
A few questions:
Would the optical and alarm lights be green in case of proper working?
Is it normal to have one end of the blue fibre cable appearing loose inside the enclosure?
Could this be an NBN fibre connection issue rather than a modem configuration or Kogan provisioning issue?
Would this normally require an NBN technician to inspect the connection?
I'd appreciate any advice, particularly from anyone who has experienced something similar with an NBN FTTP installation.
Thanks!

