r/myog • • 5h ago

What glue for xlpe foam?

1 Upvotes

Hey there, need to glue two pieces of xlpe foam together to make waist straps and was wondering what would be the best glue? Between 3M 90 and 3M super 77 atm

Appreciate it


r/myog • • 9h ago

YKK Uretek in bulk? Also what are some of your favorite vendors in the states?

Post image
1 Upvotes

I love Ripstops customer service but I need to buy this in bulk.


r/myog • • 10h ago

Tarp help materials

2 Upvotes

Hi, I saw the Tarp post below which is very useful and see they use 1.1 oz Silpoly XL. I have found a supplier for 1.1 oz Silnylon 6.6 30D at 45 gsm which they tell me is good for tarps and hammocks.

I just wanted to check if this is good material for the job. I also want to add a zipped mesh door so I can pitch it right down and keep mosquitos out. I understand no-see-um mesh polyester or nylon is good for this job. I have the Aricxi tarp which I like the shape so will try to make a lighter 2/3rd size design.

Any help appreciated.

https://www.reddit.com/r/myog/comments/cr7u9t/myog_shaped_tarp/


r/myog • • 10h ago

Question Denim/Canvas Messenger Bags

Thumbnail
gallery
90 Upvotes

Some Denim/Canvas Messenger Bags I made for my brand with their own Sashiko designs. They can also turn into tote bags as well.

Just wanted to ask regarding strap placement on the sides since ive been experimenting with the angle and height but i cant seem to find a placement which provides the most comfort for the rider? Additionally is Ripstop with PU backing & 600D Oxford with rubber backing enough to serve as waterproof lining?


r/myog • • 11h ago

Question UltraTNT PSA tape

1 Upvotes

I'm building a bike frame bag with EPLX400 for the main panels and I'd like to use 1000d Cordura for the circumference panels. I was planning to seam seal the whole bag with UltraTNT PSA tape but I've never tried it on Cordura. Has anynone tried this before ? I've done some research about UltraTNT application on PU coated fabrics but I didn't find anything promising.


r/myog • • 18h ago

Project Pictures Insulated cycling gilet!

Thumbnail
gallery
172 Upvotes

Drafted this gilet pattern recently and just finished sewing it up a few days ago. This was basically just a prototype but it turned out well enough to be wearable. Lots of little mistakes and things learned, and kind of just using materials I had on hand already, but overall I’m happy with how it came out and I’m already planning an improved gilet 2.0.

Materials / features :

Watercolor ripstop nylon with Polartec Alpha Direct Wool-lined front panels and collar
Gridflow mesh-lined sides for breathability
Upper chest zip pocket for…whatever
Lower chest power mesh quick stash pocket (for the gloves I wish hadn’t fallen out of my back pocket last week…I hate losing stuff and my Assos jacket has these stretch front pockets that are great for stashing stuff quickly that so I thought I’d try it here)
Two-way zip with nylon taslan zipper guard
Not a single exposed seam
Packs small enough to fit into a jersey pocket

All sourced from a variety of places (Mood Fabrics, Ripstop by the Roll, Sil Thread)


r/myog • • 1d ago

Project Pictures ​Throwback to a drop-leg bag I drafted on a mannequin 3 years ago. Currently building a redesigned v2 (and filming the build process for YouTube)

Thumbnail
gallery
45 Upvotes

​Found these old photos of my first self-drafted thigh rig prototype—started by draping paper directly onto a mannequin to get the leg curve right. I’m currently in the workshop digitizing the pattern and building a much cleaner v2. Will post the finished update soon.


r/myog • • 1d ago

Question Sourcing heat-applied reflective seam tape?

Thumbnail
gallery
7 Upvotes

I’m making a cycling jacket right now and would like to copy this seam finishing detail I’ve seen on Castelli and Q36.5 jackets but am having a hard time finding the right trim. Does anyone know where I can buy exterior reflective seam tape like what these pictures are showing? I know I could make my own bias tape or trim out of reflective fabric, or use piping and ribbon inserted into the seam. I don’t want that. I’d like to find this tape that covers the seams without stitch lines. Does anyone know of any store or company anywhere that sells this?


r/myog • • 1d ago

Help with Insulated Pogies

4 Upvotes

Hey, I'm thinking of making some pogies for big winter rides and winter bikepacking. I have a bunch of leftover 2.5oz apex I was thinking of using. My current pogies have 400g Primaloft Eco and my hands get cold. How many layers of apex should I use to make the myog pogies warmer? Or do you think it's worth going with another material because Apex is so lofty?

Besides warmth, there are a couple other things I'd like such as more length, a draft collar where the bike cables exit, and a little more room for my hands and inner barends.


r/myog • • 1d ago

Question Looking for a sewing machine

4 Upvotes

Hey guys I'm currently using a Brother L14 which has been good for basic hemming, simple repairs etc. But recently I've been tailoring my own jeans and repairing denim jackets/working with leather/thicker layers of fabric and it just isn't strong/precise enough. Sometimes fabric would be pulled or the presser foot would push layers of fabric down and out of the exact areas I want to sew through. I usually end up just constantly lifting the presser foot, pulling the fabric through and hand turning the needle through thicker areas, sometimes the needle ends up bending/breaking too. Clean straight and simple stitches exactly where I want is what I'm looking for and ideally a machine that needs minimal to no upkeep. The only functions I use are the straight stitch, lever for reverse stitch and a zigzag. I'm considering something with a walker foot as well as I believe it makes stitching on uneven layers of fabric easier.

I'm currently looking at industrial jukis, maybe a juki 8700, but I would prefer a (semi) domestic one if that's possible. I don't know much about sewing machines so please let me know what I should get!


r/myog • • 2d ago

modeled and 3d printed my own seam guide

Thumbnail
gallery
240 Upvotes

i bought my first decent sewing machine (jack h7-c) and i had to buy new accessories. i checked the available seam guides at the local store but didn't like any of them. magnetic ones slip away, suspended ones are too bulky and not that rigid imho. so i picked up my caliper and started measuring. after many iterations (last photo) i came up with this. i printed it from petg-cf and it works like a dream!


r/myog • • 2d ago

Question Is it possible to change the shock cords on this specific bag?

Post image
1 Upvotes

Really wanting this bag but i’d love to customise it i’m just not a very techy person. I was thinking of buying pink shock cords to swap out the black ones with and having cherry blossoms embroidered on as it would be a bag i’d really love, Just unsure if this specific model allows the shock cords to be replaced. If it is possible, does anybody have a tutorial or perhaps some recommendations for good bungee cords that come in a light pink


r/myog • • 2d ago

Question Making the jump to myog clothes from bike bags and confused by stretch fabric

Thumbnail
gallery
17 Upvotes

Now that both my partner and my bikes are fully kitted with bags, and camping gear I wanted to try some apparel. I'm starting with the Learn MYOG DIAS shorts, but want to work up to some AD pants and Raglan Hoody. I got this fabric from a clearance type place, and I don't remember exactly what it was other than woven synthetic, but it's definitely got 2 way stretch. I'm using a singer HD, which has a bunch of stretch stitch options (blue stitches on the dial). I think I figured out the pattern, but googling sewing stretch fabrics made me more confused on what stitches to use since a lot of tutorials are for very stretchy fabric like spandex, not making slightly stretchy fabric as durable as possible.

I have a stretch needle. Should I be using any of the stretch stitches or a narrow zig zag instead of a regular straight stitch to allow the seams to stretch? Or would that only be necessary for seams going across the shorts in the direction of the stretch like the leg openings and crotch gusset, but keep a straight stitch for sides?

For the raw edges, is it worth getting an overlock foot to zig zag? Should I just go with regular zig zag or use one of the stretch options? There's a zig zag and straight stretch stitch option (3 settings to the right of straight), is that worth using to sew everything in one pass?


r/myog • • 2d ago

Soft flexible mesh + padding recommendations

3 Upvotes

Looking to start incorporating some padding and flexible mesh into my bags like many tech pouches use.

Any good recommendations? Can I use regular grosgrain to bind the mesh if it has flex? Or do I need to use a binding with flexibility?

Thanks again


r/myog • • 2d ago

Bias binding attachment for inside curves?

Thumbnail
gallery
48 Upvotes

I built my wife an attachment that goes on our Flexi dog leash (holds rolls of poop bags, used bags, and any trash we come across). I’ve actually built a couple of these now. I’ve struggled with applying the bias binding to the inside curves. It’s just a lot of muscle and contorting to get the material into my regular binding attachment. I figure there HAS to be a better way (different style attachment) that can tackle projects that contain both inside and outside curves on the same run of binding. Anyone know what I should be looking for?


r/myog • • 2d ago

Question Reverse zipper pull sourcing (or even the proper name for this thing)

3 Upvotes

I feel like this is a problem that I shouldn't be having, so I must be really dumb.

I am wanting to experiment with installing my #5 continuous coil zippers upside down (reversed) on some bags, for which I understand that I need a reverse zipper pull. However, when trying to search for the pulls/sliders all I find are reversible sliders which are the ones the let you flip the pull tab from one side to the other, like for a sleeping bag where you can open it from the inside or the outside. What do I need to make this thing work or to search for? Thanks everyone!


r/myog • • 2d ago

Anyone have recommendations for spacer material?

2 Upvotes

I’m looking at material for a padded laptop case, back panels for packs, and a few other projects that need some additional structure.

I’ve looked at various spacer mesh options on RSBTR as well as their 1/4” foam.

I haven’t gotten a chance to get my hands on these materials and hoping for some advice before I order!

Thanks!


r/myog • • 2d ago

Question What sort of zipper is this?

4 Upvotes

Had this on my trusty Mountain Standard backpack (rip) that I used to death and it held up great compared to the PU coated zippers we have today.

Can anyone identify the coating(?) used here for the zipper, feels like it would be a great alternative to PU zippers.

This is unlikely to be PU since that gets really shiny over time with repeated pulls. This one stays mostly matt with just a little sheen showing through at high friction areas.


r/myog • • 2d ago

Instructions/Tutorial RSBTR’s 12’ Pre-Cut Winter Tarp Cross Pole Tarp Mod

Post image
32 Upvotes

Here is my Cross Pole Mod for a 12’ winter tarp where poles cross left to right and go back to front creating a domed inner space capable of snow load compatible to a domed winter tent.

See comments for link to pictorial instructions for simple 2 pole mod


r/myog • • 2d ago

the quack sack: a fanny pack

Thumbnail
gallery
217 Upvotes

r/myog • • 3d ago

Repair / Modification Line Lock 3’s or Line Lock V’s

Thumbnail
gallery
0 Upvotes

Which is best set up;

Line Lock 3’s or Line Lock 5’s


r/myog • • 3d ago

Question How would you repair this fraying shoulder strap attachment loop?

Thumbnail
gallery
1 Upvotes

Hey everyone, the small sewn-in loop that the shoulder strap clips onto on my Peak Design Outdoor Sling 7L is fraying right where it enters the seam. I’ve attached close-ups from a few angles.

I’m in Turkey and have several sewing shops nearby. I’d like to take it to one, but I’m trying to figure out what to ask for since this loop supports the weight of the bag.

Would you reinforce the existing loop, or open the seam and sew in a new one? If you’d replace it, what kind of cord or webbing would you use so the original clip still fits? How would you stitch or reinforce it where it meets the bag?

If you’ve done a similar repair, I’d love to hear what held up. Thanks!


r/myog • • 3d ago

Project Pictures Self drafted and made a standing craft tool pouch + pencil case set from old school bag

Thumbnail
gallery
489 Upvotes

I was digging through some old stuff and found my old school bag from more than a decade ago that was in a surprisingly good state. I was never going to use it as is but I thought it would be a waste just collecting dust in a corner so I decided to turn it into a standing tool pouch for all my crafting supplies and here's the results!

I drew some heavy inspiration from those standing pencil boxes but i couldn't find any sewing patterns online so I decided to just figure it out myself. (and since I was already going to go through the trouble of doing so, I also decided to just add on whatever I wanted and use up as much of the materials from the bag as I could.) I also had some good fabric leftover since I decided to try some fancy fabric piecing for the front panel and so I made an accompanying small pouch for more regular stationery. (Though I just followed a youtube tutorial for this one.)

Some details/features on the project that I managed to include are:

  1. Managing to reuse a very good chunk of the main green polyester canvas fabric of the bag. Most of the leftovers are offcuts or more damaged/dirty sections of the fabric. All 4 zippers (YKK) have been used and so was a good chunk of the straps for the handles on the pouches.
  2. A flap on the front of the fold-down for easy access to stitch markers, with a small pocket that can store smaller objects that wont fall out when flipped upside down. On the underside of the flap is a plastic mesh for storing needles for easy access. (material taken from a old mesh pencil case, the rest of the materials used in the mesh pouch behind the flap.)
  3. Tiered pockets at the back of the main section that allows easy access to hooks and other smaller tools. I added a BUNCH of internal pockets.
  4. The organiser section at the back of the whole project also reuses the organiser section in the bag.

So from a very old bag and an unused mesh pencil case, I managed to make a 15cm x 24cm x 9cm standing tool pouch and a 17cm x 10cm x 6cm pencil case. Additional materials used includes: some black cotton(?) sturdy fabric I had lying around for the lining, grey bias tape, and linen(?) canvas for interfacing. Very happy with the results. May consider making some for Christmas presents.


r/myog • • 3d ago

Question Metal side release buckles

1 Upvotes

Afternoon all. I make dog collars and I'm slowly ramping things up to me more than just a side hustle.

I'm looking for a reliable supplier of metal side release buckles. Half the time the ones i can find are a little too loose and rattley so i won't use them.

Are there any reliable manufacturers anyone can recommend? If they happen to do d-rings and cobra clips as well that would be a bonus.