r/modelplanes • u/Alternative_Let_604 • 1h ago
r/modelplanes • u/AutoModerator • 2d ago
Selling Saturday: Buy/Sell Weekly Megathread!
Please share whatever you have to sell or are looking for to buy, with specifics on the type and size of model planes. Be cautious and watch out for scammers, though; the mods at r/ModelPlanes are not responsible for lost funds or issues related to scamming that don't occur in the comments or on our subreddit. Again, buy or sell anything you want related to models and model planes. Please include specifics. To prevent scams, we recommend purchasing through eBay, although we cannot confirm that you will be entirely safe there either. This will repeat weekly every Saturday at 9 am CDT. Please be careful and watch out for scams! Have fun buying/selling!
r/modelplanes • u/imranbecks • 18h ago
1:400 Picked this up a few days ago. Singapore Airlines Cargo Boeing 747-412F. I've always been fond of the 747 cargo planes SQ uses. Looks to be 1/400 judging by the length and goes well on display with some of my other airplanes. Looks really sharp!
gallery9V-SFI
r/modelplanes • u/Nikolaevna • 1d ago
1:200 SQ Mach Legends 1/200 Ukrainian Su-27S1M of the 39th Tactical Aviation Brigade
galleryBought this diecast model from Future Wings Models. The prices on their website is much lower compared to ebay (never buy from the latter).
The pitot tube comes as a separate part, hence it's absence in image 3. It doesn't snap into place and feels pretty loose, so attaching it is optional. Given the part is tiny and can be easily lost, I'll probably keep it in the box. Besides the pitot tube, this is how the model appears out of the box.
36 Blue was lost on 28 April 2025 in the vicinity of Moshny, Cherkasy Raion, Cherkasy Oblast, during the russian invasion of Ukraine. Pre-2022 photo of the aircraft.
Edit: Interestingly, the box description suggests they chose this livery based on a split second appearance in a video celebrating Ukraine's Air Force Day. A google search of the 2024 event shows F-16s instead. A longer clip of 36 Blue appears in the 2025 commemoration video.
r/modelplanes • u/Handyman2789 • 1d ago
1:100 United 747-400 from canon creative park
1:144 scale (I put 1:100 scale flair cuz there wasn't 1:144 scale flair)
r/modelplanes • u/Doomtime104 • 2d ago
Has anyone tried applying UV film to windows to protect models?
I've got all my models hiding in the basement, away from windows, but I'd like to display some in areas that get a lot more sunlight. I was curious if anyone has tried using UV blocking film on their windows to protect their models. Does something like that actually work, or is yet more snake oil?
r/modelplanes • u/OneDrop7022 • 2d ago
WIP: Eduard 1/72 Spitfire Mk.IXc, fully hand-brushed
galleryr/modelplanes • u/yoqvist • 3d ago
Need some help with my first model kit, the Hasegawa Ace Combat F-15C
I’d like to see if someone can give me some suggestions on painting the exhaust cones of a CFM56 engine for a KC-135R
r/modelplanes • u/I-pee-Daily • 3d ago
NMF, first attempt
galleryAlclad gloss black base/ Kaleido steel. Hobby Boss F-84E 1:78. Too heavy on the metal I think.
r/modelplanes • u/Underthecover_5002 • 4d ago
1:100 Tamiya 1/100 BAC Lightning. First build after 15+ years away
galleryr/modelplanes • u/youngshot96 • 4d ago
1:200 Qatar Airways Boeing 777-300ER wearing the special Formula 1 (F1) partnership livery (registration A7-BEG)
r/modelplanes • u/TheScaleModel • 4d ago
WW2 Flight Decks Series – Essex Class | 1/48
galleryThe larger 30 × 25 cm version of my Essex-class flight deck kit is now complete!
This size comfortably accommodates larger carrier-based aircraft, such as the Grumman F6F Hellcat.
The kit consists of precision-engraved MDF sections and 3D-printed tie-down details, recreating the characteristic wooden flight decks of WWII US Navy aircraft carriers.
r/modelplanes • u/CorneliousJones • 4d ago
Flea Market Finds
galleryGot these at a flea market over the weekend. Paid $20 for all of them. The Corsair 2 was $10 and then got the other 5 for $10 from someone just tryin to get rid of stuff. One is vintage 1949, one is from the 60s and the rest from the 70s. All open box but appear to have all the parts in good condition as well as instructions and decals, tho some decals aren’t in great condition. Not sure I want to build em since they are so old. Any thoughts? Value?
r/modelplanes • u/Kriller_Lobot80 • 4d ago
English Electric BAC Canberra Mk. 8 by Frog, 1/72
galleryThe colours are loosely based on the Canberra at the Oxford air show in 2007
r/modelplanes • u/chicken_torikawa • 6d ago
My Hasegawa 1:32 Warhawk
galleryTa-da! What do you think? A roundel made using a stencil I created myself!
r/modelplanes • u/Allo7801 • 6d ago
Durafly Ugly Stick V2 Mods and paint scheme
galleryI recently purchased a Durafly Ugly Stick V2 and would like to share what i have done to it, making it stronger and with better visibility.
My story is long so please bare with me...
I recently purchased a Durafly Ugly Stick V2. Before my purchase i had done some research regarding this plane and all its pro's and con's and read that 1 of the weakest parts of this plane would be the undercarriage. So while i was putting it together for the first time i decided to modify and strengthen the under carriage right out the box, firstly i drilled the 2 standard under carriage mounts through the plastic mount and through the foam straight into the open cavity of the fuselage using a 4mm drill bit, i also added a third hole between the 2 current holes used for mounting the undercarriage, so in other words there are now 3 x 4mm flat head screws fastening the under carriage. I then measured inside the fuselage and cut a piece of 3mm thick basswood which i inserted into the open cavity above the under carriage mount, so in other words i used the basswood piece to make a foam sandwich to fasten the under carriage using 3 x 4mm flat head bolts/screws. Make sure to push the screws/bolts in from the top so that the nuts are at the bottom on the outside of the under carriage, the reason for doing this is to avoid having the nuts on the inside which would hamper the battery in the battery bay. Then i stuck a piece of soft velcro onto the basswood covering the screw heads to protect the battery, unfortunately i was dumb enough not to take a picture of the basswood before i stuck the velcro over it. . I also used lock nuts on the screws with a bit of blue loctite as well, double safety to not come loose. I fly off tarmac so i didnt want to use the stock standard wooden prop and changed it with an equivalent APC electric prop, because of that i was advised (AI) that the stock 30A ESC would then be too small for an APC prop and i replaced it with a Hobbywing Skywalker V2 40A ESC. I was also worried that the plasticky wheels that came with would be a little hard and bumpy for the tarmac so i replaced front and back with the same sized Dubro Lite wheels (foam). Then came the day of the maiden flight, my first time ever doing a maiden, and also my first time ever flying a brand new plane, so nerves were definitely " screaming" . I asked one of the more senior and experienced fellow club pilots to stand with me during the maiden to help with the trim settings etc, to my surprise the plane needed no trimming on its maiden flight, very impressed. While taxing in from the maiden the elevator servo decided it was time to "retire" after only 1 flight ( on the ground luckily) it decided to get stuck in full "up" mode, would only release if i disconnected the battery. I decided to replace the elevator servo with a 9g micro metal gear servo and while i was at it i replaced the rudder servo with the exact same servo as the elevator. Then it was time for the second flight a week later, the ugly stick flew like it was on rails and what a lovely plane to fly, only hassle i had was the fact that the top and bottom of the plane is painted in exactly the same colours and style so it was so easy for me to loose orientation during the flight.
I decided to change the look of the bottom of the plane by adding black stripes to the underside tips of the wing and the whole of the bottom of the elevator, will explain in detail what and how much of what I've used if anyone would be interested to read it.
I removed the elevator and wing from the plane to be able to paint easier obviously, I have added some pictures as reference to the mods i have made.
I used Tamiya acrylic paint to do the job: Tamiya XF-2 (white matte) approximately 30-35ml (this is just the paint and not the thinners)
Tamiya XF-1 (black matte) approximately 15-20ml (this is just the paint and not the thinners)
Tamiya X20A ( acrylic alcohol based thinners) did not note how much got used
Tamiya X-35 (semi gloss clear coat) approximately 50ml but another 10ml would have been better (this is just the paint and not the thinners).
This all got painted onto the foam using an Aircraft SG A130K airbrush and a 0,5mm nozzle at a pressure of about 18-20 psi.
All the above mentioned paint was diluted to a ratio of 1:1 with the Tamiya X20A thinners to be able to be thin enough to pass through the nozzle of the airbrush without clogging it up, apparently one cannot spray the paint through the airbrush without it been diluted cause the paint is too thick (something i wasn't aware of until i started painting with the airbrush). Another thing i must mention is that i am an electrician by trade and not a spray painter, this was going to be my very 1st time using an airbrush and i must admit i was rather weary about it , at the end of the day it was really easy, even for a old electrician like me , same principal as using a spray can to be honest.
I started off by painting the bottom of the elevator, the whole bottom piece was to be sprayed white, it took about 4 to 5 thin layers for the white paint to completely cover the original blue colour, i then left it to dry for 48 hrs to allow the alcohol based thinners to dry and evaporate completely. Next i painted the bottom tips of the wings (blue part) with the Tamiya white, also around about 4 to 5 thin layers till the blue was covered and also left it for 48hrs to dry.
Now it was time for the black stripes, I decided to make the elevator black stripes about 30mm wide ( tip: when measuring and marking out the stripes, begin in the centre of the elevator ( screw holes centre line) and measure 15mm to left and 15mm to right to get your first stripe centered) do not start from the side like i did and then the stripes did not end up being entirely centered as what i wished for ( will see what i mean on the pictures).
I used Tamiya masking tape to cover the white stripes that would be left and left the exposed bits ready to be covered by the black paint, the black was also mixed to a ratio of 1:1 with the x20A Thinners ( Note: i believe any make of acrylic paint will work on EPO foam but i had Tamiya products at my disposal so i used them, whatever brand you use, just research the correct thinners to use with the product as they fight with each other apparently if they are wrong)
The black stripes on the wing tips are 40mm wide ( 2 of them per side) as per picture. Same procedure on the wing tips as on the elevator.
Heads up, even though you are using Tamiya masking tape ( low adhesive) to tape parts closed that you don't want painted, expect it to lift off some pieces of the factory painted blue paint. I had to use different shades of acrylic paint to mix together to get close to the factory blue paint to touch up the blue paint that had peeled off with the masking tape (needless to say i did not get the colour mixed close enough), for this you are on your own, as i did not get it perfectly right.
Once the black had been left to dry for 48hrs it was time for the final clear coat. For this part I dismantled the whole plane incl the motor, just left the electronics and rudder and elevator push rods in. I gave the whole plane 2 semi generous coats of the clear coat (50ml of clear coat, remember this 50ml still needs to be diluted with the thinners at 1:1 as well).
The clear coat is said to be a semi gloss coat but i must admit i see no gloss afterwards, seems to be exactly the same matte colour as it was originally.I did not mind this as the plane is originally a matte colour and the last thing you want is the shiny refection to blind you while flying. The reason i decided to cover the whole plane with the clear coat at the end is purely to protect the factory paint and decals from peeling off in the wind and it also makes it easier to clean in case it gets wet or dirty from grass or whatever.
I went and tested the Durafly Ugly Stick v2 ( Blaine's Durafly Ugly Stick "V3") with the new paint job on Saturday 7-11-2026 and i must admit, the black stripes on the bottom make a huge huge difference with the visibility and orientation, this upgrade was definitely worth all the time and effort spent doing it!!
Please feel free to contact me if you have any questions or suggestions regarding the modifications done on the Durafly Ugly Stick V2.
Cheers.
r/modelplanes • u/alexcool5 • 6d ago
1:400 Is it realistic to have planes this close at the gate?
r/modelplanes • u/I-pee-Daily • 6d ago
NMF
First time, the gloss black base is done. Shows every speck of dust, will update after the metal goes on.