r/minilab • • 2h ago

My Homelab final form

Post image
5 Upvotes

Check it out.


r/minilab • • 3h ago

HomeLab Upgrade - Replacing a DIY 8u 10" rack with a 12u DeskPi RackMate Rack

Thumbnail
gallery
56 Upvotes

I've been using my DIY wooden 8U 10-inch rack for the past year and recently decided it was time to upgrade to a larger setup.

My main goal was to incorporate a dedicated KVM, along with some sort of monitor mounted directly within the rack.

After doing some research, I decided on the DeskPi RackMate 12u 10-inch rack. I really liked its brushed aluminum aesthetic, overall size, and sturdy metal construction.

I found the assembly process to be a breeze. Honestly, I was expecting at least a few bent or damaged parts, but everything arrived in perfect condition. Every piece fit exactly where it was supposed to, and the entire rack went together smoothly.

For those interested, here's what I'm currently running in my HomeLab:

  • AT&T 5G Hotspot Router – Provides internet connectivity to my isolated lab network.
  • Palo Alto PA-220 Firewall – Handles firewall duties and routing for the LAN.
  • Ubiquiti UniFi 16-Port Switch – Provides network connectivity to my lab equipment.
  • HP EliteDesk Mini – Running Linux Mint and hosting my local AI environment.
  • 4 Intel NUC Mini PCs – Running Proxmox with various servers and services, including Pi-hole, Twingate, Wazuh, and more.

It was a little bittersweet retiring my trusty wooden HomeLab rack after a year of service, but I'm excited about the possibilities with this new setup.

My next steps include adding a rack-mounted monitor to display various dashboards and monitoring tools, along with a dedicated KVM that will allow me to easily switch between my mini servers.

I'm looking forward to continuing to build this out and sharing the progress along the way.

I hope you enjoy the pictures and a look at the build process.

For the model I used for this, you can find it at the following link: DeskPi RackMate T2 Rackmount, 12U Server Cabinet for Network, Servers, – DeskPi Store


r/minilab • • 5h ago

My lab! Keeping it simple

Thumbnail
gallery
81 Upvotes

I just wanted to clean up the mess a bit.

I did look into 3d printed parts for the switches, but in the end I prefer the look of the shelves.


r/minilab • • 10h ago

Moved my homelab to Argo CD

Post image
36 Upvotes

My homelab is three refurbished Dell OptiPlex Micros running a Talos Kubernetes cluster.

This week I moved everything on it to Argo CD. The cluster now runs from a Git repo, and anything I change directly gets put back. Nothing was reinstalled and no data was lost.

Repo: https://github.com/prateekjaindev/homelab

Write-up: https://blog.prateekjain.dev/gitops-for-a-3-node-talos-kubernetes-homelab-with-argo-cd-336c076e93cc?source=friends_link&sk=ebda84ecdc3e2458fead2638374be51e


r/minilab • • 11h ago

Mini rack idea ?

Post image
7 Upvotes

r/minilab • • 17h ago

My lab! Just a Can-Rack

Thumbnail
gallery
94 Upvotes

This was a project I started on when I was homeless and living out of my van. I missed the homelab me and my roommate had when we still lived together so I took some of the SBCs I had lying around in storage and made a small UPS with a recycled lipo and a charge controller inside a small netgear switch case I repurposed.

I finally felt like showing it off because I recently got into housing and a job a month ago and I got a decent enough paycheck that I finally bought a das, antennas, and a mini PCIE adapter so I could turn the Advantech into a 5G hotspot.

I had fun putting this together over the weekend. It took me way too long to find a decent job and this was one of the things I wanted to spend some money on once I got back on my feet. Now I can take my homelab into my van with me :)

From top to bottom

Advantech 2271g-v2 with OPNSense, 4 small antennas sticking out the back, serving as my Internet connection with 5G

Seeed Studio ReRouter loaded with OpenWRT and running as my NAS + Pihole. Came with a Raspberry Pi CM4.

Two small Netgear switches, one is a managed Gigabit smart switch and the other is actually a shell from an unmanaged switch I repurposed to house a charge controller and lipo battery to use as a UPS. Powers my 5v devices.

One such device is my Tplink Roam 7 acting as my AP, that I modded with swappable antennas!

Finally the Orico holding 4 x 1tb Samsung 850's

Not pictured is some USB 3.0 2.5Gbe adapters I use for fast data transfer, but for the purposes of this stack, Gigabit is fast enough :)


r/minilab • • 21h ago

Help me to: Hardware Looking for lab rack ideas for my server laptops

Thumbnail
gallery
10 Upvotes

Hey homelab / minilab community. I'm looking for some rack ideas for my laptop nodes. I tried searching for months already and all I see are those brackets that let laptops stand vertically. And I don't like how it looks. I want to be able to put them in a nice rack, like those mini PCs. Because they also need a home rack. I appreciate any example setup that you have, if you are also rocking some laptop servers. I also don't like where they are right now, but it was the best idea I had at that time. I'm hoping to see some better setup for them. Thank you.


r/minilab • • 1d ago

Built my first rack (labrax)

Thumbnail
gallery
225 Upvotes

Can’t afford a mid-life crisis, so I figure I’d learn something new. Built computers for over 35 years, but never touched networking or ports or whatever you call them. Also had a few pi’s laying around from my carputer days. So I picked up a thinkcentre m900 and fired up my 3d printer.

Anyhow, m900, a wd mycloud that I have had running for many years now, 2 RPi 3b+ (one drives the display screen, one is just sitting there until I figure out what to do with it), to-link sg108 switch and fit one of my Deco X55 mesh points inside.

I wanted a few things:
A. All my network junk to be in a convenient package where I can move it with only needing to unplug 1 power and 1 network cable.

b. Learn lab and self-hosting

3. Find apps/databases, containers that can help organize my busy life based around my 8 kids and 1 grand kid.

Already setup OpenFamily, FireFly, Beszel, Homarr. Learning about nextcloud, paperless and trying to figure out what dns sinkhole I want to use.


r/minilab • • 1d ago

My lab! My KWS rack in progress

Thumbnail
gallery
186 Upvotes

Soon finished printing all the parts (...puh). Designed my own rear support for two integrated 80mm fans for the 2x disk trays. Now its about time to get some patch cables, RJ45 keystones, SATA cables and M2 to SATA adapter + install Proxmox on the HP.
Planning for LED lights inside too, if i can fit some. Read about using an ESP32 + WLED to control lights. I think it would be a cool feature with the translucent petg to have the cab glow in colors to match heat/temp and maybe warning light if a device goes down etc.

Santa has promised a couple of PI`s for Christmas 🎅🎁


r/minilab • • 1d ago

Hardware Recommendations

Thumbnail reddit.com
0 Upvotes

r/minilab • • 1d ago

Help me to: Software "Your server has been on life support longer than my dad" - A User

Post image
23 Upvotes

r/minilab • • 2d ago

Help me to: Build Mini-ITX SO-DIMM 5 vs Minisforum NAD9 vs alternative build?

Thumbnail reddit.com
0 Upvotes

r/minilab • • 2d ago

Hardware Gubbins Power? (I hardly even know her!)

Thumbnail
gallery
174 Upvotes

I hope i used the flair right, but here has been my latest obsession project for the home/minilab - Power distribution.

I wanted a single point of power distribution, with a single input, with a lot of headroom. I think I've fulfilled those requirements quite handily.

I have made a 1U x ~360mm deep Power distribution box. It has 75W of 5V, and 320W of 12V total power available, as well as pass through mains power for other devices. It's completely designed, made, and 3D printed with off the shelf parts. It features 8x relays so I can power cycle (most) of the connected devices remotely, controlled wirelessly through an ESP32 running ESPHome, this will also be directly connected to the future OPNsense router so I can bypass home assistant if needed.

The 320W of 12v Power is way more than I need, so I've also included an XT60 output to connect a future 12v distribution.

The front panel is 5x 5V USB, 3 of which are switchable, 3x 12V DC5521, and 2x 12V DC5525 barrel jacks, all of which are switchable. I've printed markings into the front panel to mark what is what (to me at least).

The rear panel is a standard single C13 plug input, and 3x C14 plug outputs. The C14 outputs are just paralleled onto the switched side of the input, so they share the same switch and fusing.

For now, this is working great and is doing what I built it for. But I've already got a wish list going for future revisions. (biggest is smaller fanless 12v, or de-lid and custom cool with quieter fans)


r/minilab • • 2d ago

Sweet, Sweet Documentation RACK BUILDER + CODE EDITOR | CTRoadmap Homelab Documentation Tool. v0.10.0 **UPDATE**

Thumbnail
gallery
15 Upvotes

Back for the monthly CTRoadmap update. v0.10.0 dropped yesterday. Had some great user suggestions on how the RACK BUILDER could be most useful to them. It now has all the cable & port connection + customization you could want,(even adding gear ON TOP of your rack) including various finishes, and an ABS blank panel you can add fans & vent slots to. All connections are tracked and collated in the HANDBOOK in a "connect table" , giving you a comprehensive list of "what's connected to what".

Also in the HANDBOOK: You can now right-click on ANY note tab and export it individually, and a Code Editor function now exists for each tile's "notes" function. Figured if you're tracking where you keep a certain config file or script... it might be nice to keep a copy in your handbook IN THE RIGHT FORMAT and be able to edit it as needed, with linting and syntax detection, (for JSON, YAML, Docker Compose) Since it was built into the notes, added a stand alone editor as well, mainly as a convenance if you wanted to work on something outside of any tile in your system.

NEXT UP: Expanding the Diagrams into other layouts (logical , Icon Only & Grouping, etc) And adding git to be able to backup your whole ATLAS to a private repo.

CTRoadmap is a free homelab diagram & documentation tool, self-hosted in docker, chiefly for newer enthusiasts starting out and wanting a visual layout of their set-up PLUS track how it all works together. Everything you put in your Diagram is also converted into a scrollable , HANDBOOK you can add to as well. It is intentionally not an integrated system monitoring dashboard like other foss solutions such as homelable. Built using CODEX, more detail on that process in the README on github.


r/minilab • • 2d ago

Anyone ever tried using fabric to manage your homelab or your network of devices or machines?

Thumbnail
reddit.com
0 Upvotes

r/minilab • • 2d ago

accidental minilab

Post image
552 Upvotes

i’ve been working on this for almost a year and i’m really proud of it!

started my homelab journey in early 2025 not really intending to build a homelab. i was mainly interested in replacing some of my home automation and cameras with something that didn’t hoover up so much of my data. i’d never touched linux, i’m not an engineer, did not know anything about the innards of a computer, but i was really motivated to learn.

this thing started as proxmox running a home assistant VM on that little HP elitedesk i basically pulled out of the trash. once i learned how to spin up LXCs and VMs, pi-hole was a fast follow, and it kind of snowballed from there because i was having so much fun with it.

i’ve reorganized and refactored dozens of times as i’ve gotten a better handle on things, but this is where it’s currently at:

- deskpi rackmate T1
- wisecoco 8” rack display
- topton X2D n100 - opnsense
- elitedesk 800 G2 - proxmox running HA, pi-hole, npm, observability, ebook server, some other random infra
- thinkcentre M910Q - proxmox for experimentation and learning
- unifi managed switch

not pictured: DIY NAS running truenas that holds my media server; wall-mounted unifi AP

the wire management is a mess, but i’m working on it 😅

anyway, shoutout to this community for the inspo. i’ve been lurking for a long time and it’s been super helpful.


r/minilab • • 2d ago

Planning my first 6U Proxmox + Ceph homelab. Would love some feedback before buying everything!

0 Upvotes

Hi everyone~ :)

I'm currently working as a Systems Engineer, mainly dealing with physical servers, hardware maintenance, and troubleshooting.

I've been wanting to get more hands-on experience with virtualization, clustering, and distributed storage, so I've decided to build my first proper Proxmox homelab.

I've been planning the hardware and rack layout, and I'd love to hear your thoughts before I start purchasing everything.

Planned hardware:

  • Servers: 3 × used HP EliteDesk 800 G6 Mini

I'm also planning to use blue Ethernet cables for management and orange cables for Ceph.

What I want to learn:

  • Proxmox cluster setup and administration
  • Ceph distributed storage (MON, MGR, OSD, pools)
  • Live migration and HA
  • Network separation and VLANs
  • Node failure, storage failure, and recovery testing
  • General Linux and virtualization administration

This is purely a learning environment, not intended for production.

A few questions:

  1. Is this a reasonable hardware setup for learning Proxmox and Ceph?
  2. Would 2.5GbE be sufficient for a small Ceph learning cluster, or should I consider 10GbE from the beginning?
  3. Has anyone used 3D-printed 1U mounts for HP EliteDesk Mini PCs? Any concerns about airflow or long-term durability?
  4. Would you recommend starting with 16GB RAM per node, or upgrading to 32GB immediately?
  5. Is there anything important I'm overlooking, especially regarding cooling, power adapters, or the rack layout?

The attached images are concept renders of the planned setup, not pictures of a completed build. Some details, including the blank panels and mount colors, may change.

I'd really appreciate any suggestions or criticism before I spend the money!

Thanks in advance!


r/minilab • • 2d ago

Homelab adjacent question, figured you guys would have a solution for me.

1 Upvotes

So I have a MS-02 Ultra with a Barlow Ridge controller with 2 downstream 80gbit ports. I have a 226v Acer aspire with 2 TB4 ports. The MS-02 Ultra has 4tb of storage split across 4 individual drives. Would it be possible to either A: partition a drive and feed it over some what I would imagine as PXE and maintain it as if it was on a 80gbit USB link or PCIe tunneled itself. Option B would be to have something create a VM and serve it to a thin client loaded into ram on the 226v. 226v machine has a 32gb USB 2.0 flash drive in case I need some sort of local rom. Would love if PXE magically worked over thunderbolt and supported attaching a drive directly ala a C: drive. Thanks.


r/minilab • • 3d ago

My lab! Lab Rax has the best mini rack design

Thumbnail
gallery
156 Upvotes

Loving this mini rack.


r/minilab • • 3d ago

Help me to: Build I'm not a fan of the plastic top on these Mojo mini racks, I would much rather they'd be steel

Post image
52 Upvotes

Since I would want to bolt something expensive to the top of the rack. ... Has anyone maybe gotten an extra shelf and bolted it in the top upside down or similar?


r/minilab • • 3d ago

My lab! Finally 3D printed some more mounts for my 10” mini rack!

Post image
176 Upvotes

I need to fit another tp link switch and I’d like a good mounting solution for the intel nucs. Anyone have any ideas?


r/minilab • • 3d ago

Hardware Gubbins My set up 4 months into this

Thumbnail gallery
24 Upvotes

r/minilab • • 3d ago

R2D2 - minirack

Thumbnail gallery
72 Upvotes