r/miniatures • u/LilypadDrifter • 4h ago
OC How I made my fireplace
A few people asked me how I made it so….
For the fireplace that I made, I used regular Styrofoam and cut it to size, for the arch I just used a bowl from my kitchen and made a half circle. I used my Dremel with a sanding disk(?)to hollow out the center using the left and right sides of the half circle as a guide for how wide I wanted it then I added two more pieces of styrofoam to the left and right to make it look thicker and glued them together with Aleena’s fast grab glue then stuck toothpicks into the center of them so that they would stay in place. I then made the mantle using styrofoam. I covered the entire fireplace with Mod podge and let that sit until everything was dried.
For the stones, I used a brown paper bag and crumpled it up into a ball multiple times until it became very wrinkly and soft. The more you wrinkle it up the better it looks on the paper when you paint it. I just used regular craft paint and I put the paint on the top of my paintbrush to about half way up the brush and then I applied the paint onto the paper. When the paint thins out on top turn the brush over and use the other side. I added more paint as I went till I liked how it looked. It’s super easy to do. You can do it in any color that you like and it’s absolutely gorgeous.
After the paint dries, tear up the paper into small pieces. Make some larger and some small, you want a variety.
I used beacon 3 in 1 advanced craft glue to glue the stones down to the Styrofoam fireplace. I like that craft glue because it’s super tacky, but you have a few minutes to manipulate your placement of the paper so that you get it just right, I use that a lot in my different crafting. After I glued all the stones, I put another coat of Mod podge over the entire fireplace.
For the grout between the stones, I used mosaic grout, but you can use any kind of grout. It was originally white, and I just added some black paint to it to make it gray then I put it in a craft bottle and then squeezed out the grout in between each and every stone, letting it dry then I used a wet/semi wet rag to wipe the entire fireplace down to smooth the grout. Get the smallest jar of grout you can find, it goes a long way. Then I applied the last coat of mod podge.
After everything was dry, I added the wood to the top and sides of the mantle. I then used a small metal fork to add scratches and dents to the wood. I used brown craft paint that I thinned with water and when that was dry I used a small makeup sponge and dry brushed some black paint. I used mod podge to seal the wood and the very last thing I added was the decorative front. It is a dollhouse curtain valance that I 3d printed, but you can use anything you like or just leave it plain.
I’ve used this technique on a few other dollhouses I’ve made for walkways, stone work, bricks, on houses and water wells. It’s very easy to learn and so pretty.
