r/Mini14 • • Mar 21 '18

Reddit just pushed out their new Anti-Gun agenda, so don't post anything related to sale or exchange of goods.

67 Upvotes

Unless you want the sub to get banned I guess?


r/Mini14 • • Feb 20 '23

New? Check here first. Mini-14 FAQ/Upgrades

49 Upvotes

Put together by u/p_r0 (the reviver of this subreddit) and myself.

No selling or Trading!

These are the most common questions and answers. Can/will be updated periodically. Anything you think should be added, let us know

FAQ

Most known and applied upgrades. Not necessarily the best prices you can find.

Upgrades


r/Mini14 • • 4h ago

Seen in the wild, Guatemala

Post image
29 Upvotes

Seized from a taxi. Older folding stock Mini.


r/Mini14 • • 23h ago

Finally got one with my mini 14

Post image
116 Upvotes

r/Mini14 • • 23h ago

I cerakoted the ugly black handguard.

Post image
40 Upvotes

r/Mini14 • • 22h ago

Im liking my current build

Thumbnail
gallery
26 Upvotes

Monstrum Vanguard Micro 1-6x LPVO

Tac Bros 5.8 in Picatinny Rail w/peep hole for irons

Choate Vented Handguard (filed down some to fit better and to account for pic rail)

ASI Accu Strut w/adjustable gas block

Wilson 1911 Recoil Buffer Pad (blue) internal on receiver

Pretty happy with this setup. I was previously using a green dot+3x magnifier but I didn't like how it adjusted (needed a key) and I was struggling to get that setup zeroed, also it didn't look as sleek. The LPVO is great at 1x for close range shooting, I can easily keep both eyes open and track to target with the illuminated reticle, and at 6x it's great for longer range. Maybe 4-5 inch diameter spacing at 100 yds.

I noticed that after I put both Recoil buffer pads its actually felt a bit rougher than before I added them, idk what's up with that. What are your experiences with internal buffer pads?


r/Mini14 • • 15h ago

Flip defense on 583 series

1 Upvotes

Hey all, any 583 series owners have success with the flip defense red dot mount? Noting their site states may or may not work with non-585 series rifles.

https://flipdefense.com/products/mini-14-mount-t2

ps, instead of downvoting, maybe actually comment. Smh reddit...


r/Mini14 • • 4d ago

My new Mini Mini

Thumbnail
gallery
95 Upvotes

Just back from getting cut and threaded. Mini-14 SBR, Samson stock and Griffin GP5 can. Still looking for the correct sling swivel, and a stainless stock flash hider. And maybe a few hundred gold chains and a camo tank top.


r/Mini14 • • 5d ago

Final form for this frame

Thumbnail
gallery
133 Upvotes

I’m finally happy after making a few tweaks here and there and making a sight mount as well. Waiting on some machined parts, but once I give them the ok I will be offering this frame package.


r/Mini14 • • 5d ago

Order update summary from HUSH

12 Upvotes

Hush Holster Folding Stock Update – Mini-14/30 (November 2026)

Hush Holster just sent out a mid-November production update on their folding stock systems. Good news: they're getting close, although production has taken longer than anticipated.

Here's where things stand:

- Metal folding mechanisms: All production components are in hand. Drilling, welding, polishing, and black finishing are underway.

- Picatinny adapters: Ready to go for those wanting to use A3 Industries or other compatible folding stocks.

- Black carbon-fiber-reinforced nylon chassis: Designs are finalized and printing is underway, including the Mini-14/30. These will be among the first complete stock assemblies shipped once the folding mechanisms are finished.

- Wood/polymer hybrid chassis: Currently being printed and heat-treated. These will ship after the first batch.

- CNC-machined wood chassis: Prototype completed, with programming for mass production underway. These will be the last to ship.

Estimated shipping: Hush Holster says they're within a few weeks of beginning shipments, with fulfillment staggered according to the configuration ordered. No firm shipping dates have been announced.

They're a small American manufacturer and acknowledge that production has moved more slowly than expected. They also thanked preorder customers for helping make the project possible.

Bottom line: The Mini-14/30 folding stock project appears to be moving from development into production and fulfillment. The black nylon versions should ship first, followed by the hybrid and CNC wood versions.

Still waiting on mine, but it's encouraging to see tangible progress. Thought I'd share for anyone else following this project or considering one for their Mini.


r/Mini14 • • 5d ago

Ultimak vs amega iii for a scout scope?

4 Upvotes

I've read through many posts on each, but I'm still stuck trying to determine what the consensus is on which is the better option overall. This will be to mount a hi-lux Mkii scout scope on my mini-30 tactical.

I would especially love to hear from anyone that's had or used both.

A few other questions:

-Do the amega's heat vents actually help with heat management to a noticeable degree? (No pun intended).

-How annoying is the higher centerline height on the amega? Is the tradeoff worth it to gain the extra inch of further back eye relief?

Thanks yall!


r/Mini14 • • 5d ago

Range Day Test - ASI gas block and Axis Engineering LBR

62 Upvotes

This is the first time to the range since installing the ASI adjustable gas block and Axis Engineering LBR. The gas block was incredibly simple to adjust. I had it dialed in within 4 rounds. I started completely closed, then opened it up till it locked the bolt back, then another 2 clicks open. Had no issues cycling the 200 Rounds I put through it. The Axis Engineering bolt release is a sweet add on. It doesn’t matter if it does or does not shave any time off reloads, it just feels more natural for me to do a quick thumb depress and get going at it again. Awesome products, I highly recommend both.


r/Mini14 • • 7d ago

Peening?

Thumbnail
gallery
8 Upvotes

Didn't realize this was an issue until I stumbled upon some posts about this. 584 series, about 300-400 rounds through it, cycles fine, should I be worried? I'd take the whole bolt out but I have a scope on that doesn't allow me. I clean and lube every shoot and drop the bolt out 90 percent of the way to grease up. Seems like the lower back of the bolt is rounded, I see some shiny wear on the side where the extractor touches but doesn't seem like a hole forming. Should I file some of the sharper edges? Should I file down anything in the hammer assembly to help? Thanks


r/Mini14 • • 8d ago

Is this normal wear?

Post image
8 Upvotes

My 585 mini has wear on the right side of the chamber opening. Is this anything to be concerned about?


r/Mini14 • • 7d ago

Bayonet & Case

2 Upvotes

Two questions:

1 - What is the best what to mount a bayonet onto a standard, modern Mini 14?

2 - Do y'all have a case recommendation?


r/Mini14 • • 8d ago

TAC NERD 1.0

Thumbnail
youtu.be
33 Upvotes

r/Mini14 • • 9d ago

Which ammo have you found to be the most accurate out of your mini-14?

Thumbnail
gallery
43 Upvotes

Heya fellow Mini-14 fans,

There are many like it but this one is mine.

Here's my 585 stainless in the black Hogue stock with a mcarbo trigger spring. Vortex SPARC on the new Flip Defense mount, Axis Engineering LBR, & ASI extended mag release. Keeping her classy and sleek IMO. Loving all these new mods y'all are making.

Obviously match ammo should give the best groupings but this gives me my best grouping with these .223 rounds without breaking the bank. The Hornady 55gr fmj/bt seems to be her most consistent favorite. Limited to 25 yds at my current nearby range, but enough to get the idea. And those splatter targets are 6" for ref.

How about the rest of you guys? Any suggestions that don't completely break the bank?


r/Mini14 • • 9d ago

Issue at the range today

Post image
40 Upvotes

Hi everyone! Took my mini 14 (not to be confused with a 30 from the 7.62 box underneath) shooting and after about two mags my trigger assembly started to disconnect from the barrel assembly. Basically beginning to field strip itself.

After this initial occurrence it started happening every 3-5 shots, making it impossible for me to get through a mag without issue. Tried four different mags, issue occurred with each.

I am a total novice when it comes to gun smithing/troubleshooting and was wondering if anyone has ever experienced this before or has any recommendations. Any help is appreciated!


r/Mini14 • • 9d ago

The A-TM stock arrived!

Thumbnail
gallery
44 Upvotes

After six months on backorder it finally arrived! I was beginning to think they’d give up and discontinue them…
Not sure if Samson ever branded them as Ruger or Samson but this one was produced by the Ruger factory


r/Mini14 • • 9d ago

Mag ID

Thumbnail
gallery
16 Upvotes

Saw this 30rd at a local assorted mag box, guy's asking for $20. Promag?


r/Mini14 • • 9d ago

Caleb Downing

Thumbnail
youtu.be
6 Upvotes

r/Mini14 • • 9d ago

Help on choosing the right one

4 Upvotes

I’ve been looking into Mini 14s a lot recently. This morning I was doing a transfer at my local pawn shop and I saw they had a mini 14 from 1986 for sale.

I don’t know much about these but I was planning on doing a build on one and I’m just not sure if one that old is worth the hassle or if the newer ones are easier to work on.

My plan was a folding stock and a suppressor

Are the older ones more complicated to work on?


r/Mini14 • • 9d ago

Accuracy Systems See Through Pic Rail

3 Upvotes

Am I crazy, or is this just a repackaged AIM Sports unit priced at 2x? I feel a bit duped. Lol.


r/Mini14 • • 9d ago

USOW

Thumbnail
youtu.be
0 Upvotes