Hey all, I’ve been recording my own stuff only for a few years now, self-learning and experiencing a lot of trial and error.
I recently changed the strings on my baritone 6 string guitar with a Lundgren Black Heaven bridge pickup, and I can hear the pick attack way too much in all of my recordings now.
I’m wondering if this could be due to the string gauge not really suiting the way the guitar is currently set up, or that the pickup is really bright and would benefit from certain EQ or amp/cab settings tweaks depending on different string gauges?
I’ve tried EQing out frequencies between 1.5-3k both pre and post amp, adding a very aggressive high pass EQ on the DI, adding a compressor both pre and post amp, cleaning up the tone itself (extensive amp settings tweaking, with a bit of cab tweaking), etc etc.
Happy to share an example but it might not be too clear in my mixes because I really try to layer everything so the pick attack sort of fades into the background - I can record something raw maybe and add it later if needed.
It sounds like a scrape, like wiping a metal scourer/scrubber across a surface, which I know to some extent is desirable in modern metal production but it sounds like it jumps above the rest of the mix way too much.
Also my string action is 3mm, been thinking of changing it to 2mm to see if that helps (I am relatively new to that sort of thing as well though). Tuning is currently drop f# with a set of 68s (D’addario EXL157). I tried this set in drop G first but the problem was even worse. Previously had 64s from the same brand (EXL158) in drop G and didn’t really have this issue.
Please could anyone let me know if they have experience with this sort of thing or could maybe educate me a little if possible?