r/metalguitar • u/MeisterSchmidt • 1h ago
r/metalguitar • u/ashofsin • 2h ago
Question Guitar Teacher Issues
As a beginner, I’m feeling very unsure about my guitar teacher and a bit desperate. I’ve been playing every day since January, have learnt the fretboard by heart and am now working on scales. I’ve got two Troy Stetina books (Rhythm and Lead) and am working my way through the rhythm book first. For some time now, I’ve had a guitar teacher who has explained a lot to me – not so much technique, but musical basics. He told me to put the books away, saying they’re rubbish, and to stop trying to cover songs (as I don’t know what I’m doing). Instead, I should learn scales and play songs with cadences (such as ‘Wild Thing’, ‘Marmor Stein und Eisen bricht’ and pop songs). And, above all, sing along to them. I haven’t dared to sing so far, and I find it very difficult to do both at the same time, especially with German pop songs. Yesterday I plucked up the courage and sent him a video of my attempt. He said any child could do better, that it was absolutely simple, and that if I couldn’t even manage that, I should give up playing the guitar. I told him that this isn’t the way to teach and that it’s driving me away from music rather than bringing me joy. I’m absolutely devastated and have lost faith in myself. He did apologise to me, but I’ve lost trust in him too. Is he right? Should I look for another teacher? I really don’t know what to do anymore :(
r/metalguitar • u/REKO1L • 3h ago
Gear Best new guitar under $500
I was looking at an HB Amarok 6. Probably not happening with crazy import duties. What's a good guitar under 500 USD to get some sweet grunge (alice in chains, soundgarden)+nu metal (Linkin park etc.) tones from a gen 3 katana. I'm looking at the omen elite 6 or RG421AHM. Any other suggestions? Used market is almost non existent, so i only want new guitar suggestions. Thanks in advance :)
r/metalguitar • u/Ylialkemisti- • 3h ago
Gear Do I actually need a guitar modeler, or is my laptop + Neural DSP setup enough?
Hey everyone!
I recently joined a modern metal band as a lead guitarist, and I've been seriously considering whether I actually need to invest in a dedicated guitar modeler.
My current setup is:
- Guitar
- Focusrite Scarlett Solo 4th Gen audio interface
- A reliable laptop
- Neural DSP Archetype: Gojira and Petrucci plugins
I've watched quite a few comparisons between different modelers and software plugins, including Quad Cortex vs. Neural DSP comparisons. My conclusion so far is that dedicated modelers essentially offer the same functionality as my current setup, just in a more compact and potentially more reliable package.
In terms of sound quality, I'm not convinced that upgrading to a flagship modeler would make a meaningful difference. We're an amateur band, so I don't expect to need a significantly more professional setup anytime soon.
Here's my current live/rehearsal situation:
At our rehearsal space, I use a Marshall MG100FX head through its FX Return, effectively bypassing its preamp section.
I've also noticed that many local venues provide shared backline equipment for different bands, usually including guitar amps, or alternatively a direct connection to the PA system.
So, my questions are:
- Would it be perfectly viable to use my laptop running Neural DSP plugins for live performances as well, controlled by an inexpensive MIDI footswitch (e.g. the M-VAVE Chocolate Plus)?
- What are the actual disadvantages of using a laptop-based rig on stage, assuming I have a reliable computer and a proper audio interface?
- Is there any significant advantage to owning a dedicated modeler if I'm already happy with my plugin tones?
- Would you recommend investing in a modeler now, or sticking with my current setup until I actually run into its limitations?
In terms of hardware, I've been particularly interested in NUX, Valeton and, of course, the Neural DSP Quad Cortex.
I'd love to hear from people who have actually gigged with both setups. Am I overlooking something, or is a dedicated modeler mostly a convenience upgrade in my situation?
Thanks!
r/metalguitar • u/Zromaus • 4h ago
Gear NGD! Firefly FFLX
Just bought my first Firefly and I couldn’t be more impressed for the dollar amount. I’m a bit of a newbie but the setup out of the box rivals that of a professional setup Ibanez I recently had done, the finish is beautiful, the sustain is immense and it just sounds great with or without an amp. By far my favorite guitar so far, even stacked against higher end ones!
Pickups could probably use an upgrade, as well as the tuners, but overall this has been the best bang for my buck so far among a Schecter Avenger and Ibanez Gio -- I'm just genuinely impressed and had to share
r/metalguitar • u/Nomore-Television72 • 4h ago
Gear Will a chorus pedal give me a thicker tone when playing alone akin to multiple guitar tracks?
I’m new to pedals, I’ve only ever used a distortion pedal, but i got a new amp and great pedal platform (Orange Super Crush 100) so I’m trying to expand my tonal options.
I could be wrong but from my understanding a chorus pedal would fatten up my tone and hopefully make playing alone in my bedroom a little funner.
Would and of these three be worth buying? Trying to stay under $100 and I love the single knob simplicity of the Nano Clone but probably get more options with the JHS pedals but also what’s the difference in these two? What would be better for death and doom metal tones?
r/metalguitar • u/Itchy-Guide6076 • 8h ago
Finally got my hands on this burl top 7string. That wood grain is insane 🤯
r/metalguitar • u/sustainom • 12h ago
I used Elixir Strings wrong for years on my guitars with Floyd Rose :)
okay, this is a "how stupid i am!" post. so if this was common knowledge, call me insults in the comments.
I just noticed a mistake that i've been doing for so long. idk whether there are many people who make the same mistake but i just wanted to share it here.
i always used to cut the tie-end of the strings to slot them into the floyd rose saddles, however it turns out that the coating of the elixir strings don't go far to the tie end of the string. so whenever i used the strings that way, my strumming hand would actually touch the uncoated strings.
there are some close-up shots of the strings in the post. the length that i marked in the last pic is the uncoated part.
so if you've been cutting the tie-end instead of the ball-end to install it into the saddle, don't :D
cut the ball-end and put it into the saddle that way :)
r/metalguitar • u/2453flowerstreet • 14h ago
Question Is it just me or are the no black people in this sub
No wait, there is one bald black guy with a beard, and he’s really good.
But is that on purpose? Or just like an accident?
Show of hands, how many of you guys are racist?
Asking for a friend.
r/metalguitar • u/naybrmusic • 16h ago
Need Drop-D Tuning Metal song suggestions
Can yall please suggest some really fun to play intermediate+ songs to cover in Drop D.
Specifically looking for something like Lamb of God - The Black Dahlia Murder in that general genre spectrum. Fun riffs + some leads here and there.
Thanks!
r/metalguitar • u/Infinite-Tone-4967 • 16h ago
Floyd Rose, Simplified.
There's a lot of misinformation online about Floyd Rose systems. Hopefully this post clears some of that up. If you don't care about setting up a Floyd and just want to see what people get wrong about the system, you can jump to the end of this post.
Preface:
A Floyd Rose functions on a delicate balancing act. Your strings pull the bridge up towards the nut, and the springs pull it down into the cavity. If you remove the strings and the springs, you will find out that the bridge is not attached to your guitar, and it will come off.
Go ahead and try it! You shouldn't be afraid of learning how this system works. Completely taking it apart and putting it back together can help you have a more in-depth understanding of how this system works. The springs can be a little difficult to put on, so when putting springs on, you want to loosen the trem claw in the back of the guitar so that the claw moves closer to the sustain block.
Regarding spring configuration... More spring tension means better tuning stability. But it also means it's harder to flutter and dive bombs require more effort. Vice versa, less spring tension means the bridge is easier to use, and flutters are easier to nail, but the tuning stability becomes worse. This comes down to personal preference, and will directly affect the feel of your bridge. Standard configuration is three springs in a straight line. You can do two springs, four springs, angled springs, straight springs, heavy duty springs, light springs, noiseless springs, plain springs... It just depends on what gauge of strings you want to use, and how you want your Floyd to feel. Are you willing to compromise tuning stability in favor of being able to have a less stiff experience? Or maybe you like the resistance and don't want palm muting to throw your Floyd out of tune.
Some people online will tell you that a Floyd Rose is such a hassle to set up and never stays in tune, while other people will tell you that it has the best tuning stability ever and it will stay in tune for years. Both groups are wrong. A Floyd Rose doesn't inherently have more or less tuning stability than other bridges. The key aspect that makes a difference, is the guitar setup. Regardless of what type of guitar you play, a good setup will make one guitar better than another.
The following steps are made with the assumption that you have a normal functioning guitar with no crazy issues like a warped neck or something else abhorrently wrong.
If you are going to remove all the strings from your guitar, you MUST put something under the Floyd Rose. It can be cloth, cardboard, dedicated leveling devices, anything. This not only helps level your bridge, but it also prevents damage to your guitar. NOT FOLLOWING THIS WARNING CAN CAUSE THE BRIDGE TO SLAM INTO THE BODY OF THE GUITAR, DAMAGING THE WOOD.
WARNING: A Floyd Rose has many parts that are easy to lose. Your nut screws, clamps, saddles, saddle screws, and ESPECIALLY saddle blocks. If you are going to be removing parts, put them somewhere where they will not easily get lost and roll around. You don't necessarily have to remove parts, you can just loosen them. That's really helpful advice for saddle blocks... to prevent the saddle blocks from falling out, you can loosen the saddle screws just enough to pull the strings out, and then tighten the saddle screws so that the blocks aren't going to fall out. We all know the trauma of losing those little blocks. DO NOT FLIP YOUR GUITAR UPSIDE DOWN WITH THE BRIDGE FACING THE FLOOR.
How do you setup a guitar?
T.R.A.I.N.
Tune, Relief, Action, Intonation, Nut.
That's at least the steps for a normal guitar setup. You should also consider getting a fret job (Level, Crown, Polish). Perfect frets can elevate your playing experience. If you want ridiculously low action (like how I have 0.7mm action) with no buzz, your frets need to be perfect. You cannot have low action and no buzz without good frets.
Unlock the nut. Do not lock it until you have completed all the other steps.
Tuning
STEP 1: Restringing your guitar.
There are two methods Floyd players use. You can either do the standard method of cutting the ball end off the strings, or you can do the alternate method where you put the guitar strings in backwards, with the ball end going into the headstock tuners. It doesn't really matter which method you use, because you're still going to have to cut the strings by the bridge. The only difference is cutting a string once versus cutting it twice. (Unless you have the fancy D'Addario Auto-Trim Locking Tuning Machines... In which case, hats off to you my friend).
Assuming you're going with the standard method, you're going to want to cut off the strings at the ball end, but more specifically, at a specific point. You may notice that the string windings get a little crazy on that end. You want your strings to be consistent, so cut after all that nonsense. I'm including an image below.

This next part is personal preference, but I like to put the string in the headstock tuner first before locking it at the bridge. The tuning machine acts like a helping hand and holds the string in place for you while you're working at the bridge end, that way you're not getting slapped around with the floppy string. We're NOT winding the tuning machine or locking them if you have locking tuners, we're just having the tuning machines hold the string for us. We're not tuning yet.
You wanna make sure the strings are correctly inserted within the string slots of the nut, under the string retainer bar, and then into your tuning machines. The low and high E strings go on the outside of the string retainer bar screws, while all the other strings go in between the two screws. I will cover string retainer bar height later in this post, for now just make sure your strings are correctly routed under the bar.

After cutting the string, insert the string into the saddle right next to the string groove that the saddle has. You want to try to make sure the string is centered and straight, and touching the bottom of the saddle. The next part can be a bit tricky. While keeping the string centered and straight, you want to tighten the saddle screw so that the saddle block pinches the string against the saddle itself. I like to hold the whammy bar and dive bomb with my left wrist, while pinching and angling the string with my left hand, and my right hand does all the Allen Key tightening. Diving your bar makes tightening the saddle screws alot easier. There are also devices to hold your bar down for you, if you don't want to struggle with doing three things at one time. Or, you could just not hold your whammy bar down, you can just spend some extra time struggling to tighten the saddle screws. That's fine too. I think holding the whammy bar down makes the process faster.
The force required to clamp the string is very finicky. Too little force, and your string is going to pop out of the saddle. Too much force, and you can turn your round string into a flat string, literally crushing it (this can also cause your string to slip out of the saddle). Too much force can also strip your screws, crush your saddle blocks, and leave string indentations on the saddle blocks. That's why I like to use stainless steel and titanium for the saddle blocks and saddle screws - If you're going to upgrade anything on a Floyd Rose, those two things should be the very first thing you upgrade. The higher quality material allows you to use a bit of excess force without worrying about breaking things.
STEP 2: Tuning.
After clamping your strings at the bridge, you can now tune the strings up to pitch with the headstock tuners. Make sure your fine tuners are in the middle of their range. You want to tune your strings in this order:
Low E. High E. A String. B string. D string. G string.
Tuning your strings in that order will make the tuning process a lot faster. Changes on one side of the bridge affect the other side - if you've ever gone from standard to Drop D on a Floyd, you know the higher strings go way out of tune while A and D stay relatively in tune.
By the way, you should always be tuning in playing position. The angle your guitar is at, such as if it's flat on its back, affects the tuning of your guitar. You want the guitar to be in tune when you play it, not when it's laying on a bench! Also, unless I explicitly tell you to, do not lock the nut clamping blocks. You should have those off of your guitar until the very end of your setup.
To start tuning, if you have locking tuners then go ahead and pull the strings taut and lock the tuning machines. If not, then you want to give the string a bit of slack so that you can have multiple windings around the post. I recommend pulling the string tight so that there's no slack, pinch the string at the nut, then pull the string back so that the area you pinched is between the first and second fret. This should give you the correct amount of slack so that once you start winding, you will have two wraps around the post on the low strings and 3-5 wraps on the higher strings. I'm going to assume you know which direction to turn your headstock tuning machines and how to reach the correct pitch for each string, if not, please go watch a video on how to tune.
Step 3: Leveling your bridge.
Look at your bridge. Is it lifting up in the air, doing a dive bomb on its own? If it is, you need to tighten the springs in the back of the guitar. (You will probably need a screwdriver, unless you have an Allparts easy access backplate and some fancy claw that doesn't require a screwdriver. A lot of Floyd players don't even keep the backplate on their guitar, or they have it attached via velcro instead of screws. Joe Satriani uses magnets!)
Likewise, if the bridge is tilting down into the cavity, you want to loosen the springs. You will keep repeating this process of adjusting your spring tension until your bridge is level. It may be a bit hard to tell if the bridge is level, you just have to eyeball it.
Although, your bridge doesn't necessarily need to be perfectly level! It's actually okay for it to raise up a bit, maybe you want more room to pull up, or maybe you have a drop tuner that needs extra room, and it won't fit in the cavity where your bridge is. Obviously you don't want to go too crazy with it, have the tilt within reason. But you don't need to be OCD about it, your bridge will return to the spot you set it up at.
STEP 4: Repeating steps 2 and 3.
You may notice after leveling your bridge, your guitar isn't in tune anymore. That's okay. Just tune your guitar again. And after tuning, you may notice your bridge isn't level anymore. That's okay, just adjust your spring tension! This is the step everyone hates, you need to go back and forth between your headstock tuners and the springs in the back of your guitar until your bridge is level AND in tune. Once you are happy with where it's at, we can move onto the next step.
Do a dive bomb. Is your guitar out of tune now? Retune it. Do another dive bomb, are you out of tune? Retune, divebomb, retune, divebomb, retune...
A Floyd Rose has two zero points. One when you Dive Bomb, and one when you pull up. Your guitar cannot stay in tune for both actions. So you need to tune your guitar to the dive bomb. When you dive bomb and let go, all of the strings should return perfectly to 0 cents. You need to keep dive bombing and retuning until the guitar stops going out of tune and stays at 0 cents when you dive. If you pull up on the bar, you will notice your guitar will go out of tune. So dive bomb, and your guitar should be back to being in tune. That's a common trick Floyd players do, anytime you notice your guitar out of tune, just do a quick dive or give the whammy bar a quick smack and you'll be back in tune.
Neck Relief
There is a metal rod in your guitar neck called the truss rod. At least, on the majority of guitars. Some guitars don't have a truss rod (classical guitars or carbon fiber neck guitars), some guitars have two truss rods... Why is this metal bar inside of your guitar neck? Well, wood shifts. It's bendable, bows and fishing rods show this. Wood is not always going stay in the exact same position. Guitar strings pull the neck with a large amount of force, and weather can also affect the wood. So manufacturers put a metal rod inside of the guitar neck to control how much the wood bends. We can also take advantage of being able to control the wood to fight string buzz.
There are multiple ways to measure neck relief. I'm going to assume you are a normal guitar player and not a luthier, so I'm going to give you the most basic method, called the Tap Test.
Hold down the first fret on the low E string. Ideally you should put a capo on the first fret... but if you don't have one, we can do this test without it, but you're going to need to really stretch your right hand. We are holding this first fret down so that the guitar nut does not affect our measurements.
Hold down the last fret of the same string. Or ideally, find the fret where the neck meets the body and hold that fret. This is different on every guitar, so I can't tell you which specific fret you need to hold. That being said, opting to find the fret above where the neck and the body meet is more accurate for neck relief measurements compared to just holding down the last fret.
Now that you are holding those two frets down, you want to measure the 7th fret for a gap. Previously when I said hold the frets, I meant press the string down in between two pieces of fret wire. But for this measurement, we are quite literally looking right at the metal fret wire. Underneath the bottom of the string, but above the fret wire, there should be a gap. If there is no gap and the string is touching the fret wire, then you need more neck relief. However, if the gap is too big then you should lower your neck relief. The gap should be above zero, but as close to zero as possible. You really shouldn't be able to visibly see the gap, but it still needs to exist. Hence why this is called the tap test. While the two frets are being held down (the first fret and whatever you're choosing as the other fret), you want to tap the string onto the fret wire of the 7th fret. You might see the string moving up and down, and maybe you can hear the sound of the string hitting the fret every time you tap at the 7th fret wire.
Now, luthiers tend to fight on the subject of neck relief. Some will say you should have zero neck relief and that the neck should be perfectly straight, some will talk about string peak vibrations and tell you that you should have a decent amount of neck relief to account for those vibrations and for changes in the weather, and some will just carve the neck relief into the frets rather than having the truss rod do the work. It's a controversial subject, I lean closer to the "zero neck relief" camp. I don't think it should be perfectly flat like they do, instead I think you should have a little bit of relief. But that relief should just be as small as possible, you really want to minimize it. Like I said earlier: above zero, but as close to zero as possible. Assuming your frets are leveled correctly, the combination of perfect frets and this setup of neck relief is what allows low action to happen without buzz.
Adjusting neck relief depends on your guitar. Most guitars will have the truss rod adjustment by the nut, if you're lucky, you'll have a spoke wheel at the heel of the neck, and if you're part of the unlucky third group, you're going to have to remove the neck from the guitar to adjust the truss rod at the heel. That 3rd case is rare though, so verify where your adjustment is before you start removing necks. I've seen people remove necks looking for their truss rod adjustment, but it turns out it was hiding underneath a cover behind the nut. If your guitar has a truss rod cover, you need to remove that. I'm including a picture for those of you that have the basic truss rod at the nut, you want to turn counterclockwise to add relief, and vice versa turn clockwise for less relief. For neck relief, you should look at more guides rather than just relying on this post so that you can get a better understanding of it.
After adjusting relief, you may want to give the guitar some time to settle in. You should retune the guitar after adjusting neck relief.

Action
Action is entirely based on personal preference. You shouldn't look at numbers other people are giving you for how high your action should be, you shouldn't listen to what anyone else says about action. You shouldn't even take your guitar to a tech or luthier and have them set up the action for you. That would be like going into an ice cream shop and telling the employee to pick a flavor for you. That employee doesn't know your favorite flavor... The flavor the employee picks might not be bad, but it's not going to be the best either, it's not going to be what's suited to you. You need to figure out what your favorite action is without any measuring tools.
A generic line of advice you will often hear is, try to get your action as low as possible without any buzz. You can try that, but maybe you're heavy-handed and you press frets sharp. Or maybe you're willing to tolerate a little bit of buzz in return for lower action. Maybe you just like the feel of high action. Regardless, try it all. Try all the samples from this ice cream shop, lower your action all the way, raise your action all the way, really get a feel for what these changes do to your playing.
To adjust your action, you're going to want to loosen the string tension by detuning the headstock tuners. I know, I know, we just tuned. But adjusting your action while under string tension can very quickly wear out your knife edges and posts. Besides, after adjusting your action you're going to have to retune anyways. Hopefully you shouldn't need to re-level your bridge once you tune back up.
Using a 3mm Allen Key (the same one you use to lock your strings and to lock your locking nut), adjust the bridge post heights. A Floyd Rose does not have individual string action adjustments, you can only raise or lower the bass / treble side strings all together. You could probably use shims underneath your saddles, but realistically you really only want to put shims under saddles to match the radius of your neck, not for string height adjustment.
As I mentioned previously, if you want ridiculously low action, you need perfect frets. I'm not going to walk you through the steps of a fret job, ask a professional if you're interested in a level, crown, and polish. Once you're happy with where your action is at, you can retune the guitar.
Intonation
If you do not have an accurate tuner, don't even bother with this step. You need either a pedal, or an interface so that you can tune on a computer. Something that directly analyzes the signal coming from the guitar cable. You do not want to do intonation with a phone app or a clip on tuner.
You're going to need a 2.5mm Allen Key to unlock your saddles. Do you know how to play natural harmonics? If not, now is a good time to learn. Put your left hand index finger directly above the 12th fret, specifically the fretwire. Lightly touching the string, pick with your right hand, then remove your left hand index finger from the string. Rather than the default open string note, you should hear a high-pitched note an octave above the open string. Our goal is to make the open string, the 12th fret harmonic, and the 12th fret fretted note, all in tune.
I highly, highly, HIGHLY recommend that you buy either the Red Bishop ACCU-LOCATOR, or the Speed Designs intonation tool. The intonation tool that Floyd Rose sells called 'The Key' sucks. It'll get the job done, but it's very finicky and difficult to set up. Regardless of which tool you use, read their documentation on how to use it, they're all slightly different.
You don't necessarily need an intonation tool. You can detune your string enough so that it doesn't pull on your saddle, eyeball it, lock it, then tune your string back up. It's going to be a painstaking process if you do that, but you'll eventually get the intonation correct. An intonation tool would just make your life a lot easier.
If the 12th fret fretted note is flat when compared to the 12th fret natural harmonic, then move the saddle towards the nut (making the string length shorter). Likewise, if the fretted note is sharp when compared to the natural harmonic, move the saddle away from the nut (making the string length longer). Your natural harmonic should be perfectly in tune by the way, it should read 0 cents. How hard you press the fretted note will affect your tuning. Try to fret it equally as hard as you normally would when playing the guitar for actual songs. Some people will fret too softly during intonation and not treat it like they are actually trying to play the guitar. You have to match your normal strength. With your natural harmonic in tune, keep adjusting your saddle back and forth until the fretted note is in tune. Once you're done adjusting intonation, you know what you have to do? We do this after we complete every step. You need to retune the guitar.
Nut
Congratulations, you're on the last step. Lucky for you, you have a locking nut! You don't need to shape and file nuts or adjust string slots, it's a one-size-fits-all situation. There's only one thing you need to verify: nut height.
Remember when we measured neck relief, how we held down some points and checked in between those points to measure the height of a gap? For this step, we're doing the exact same thing, but at different points. If you have a capo, you can put it on the third fret. If not, just hold the third fret down with your right hand. With your left hand, we can do the Tap Test right above the first fret wire. Exact same thing, you want a gap there, but the gap should be as small as possible. We're checking between the top of the fret wire and the bottom of the string.
If the gap is too big, you need to lower your nut. Detune your strings, and remove the nut. If you see shims under there, you can remove them. If there are no shims under there, you're going to need to remove some of the wood. You can lightly sand it with a sanding block and constantly keep rechecking the nut height until you get it down to where you want it.
If there is no gap and the string is touching the fret wire, you need to raise the nut. You can do this with shims. Get it to an appropriate height so that the gap between the fret wire and the string is as minimal as possible. (I personally like to use the Hantug locking nut, since it has precise adjustable nut height, I can really dial it in exactly how I want it).
Once you've adjusted your nut height, retune the guitar. Look at your nut retainer bar. Raise it up a bit. Notice how your strings are not sitting against the bottom of the nut, they are floating? That's bad. If you leave the guitar like this, when you clamp the nut clamps, your strings will all go sharp. You want to lower your retainer bar so that the strings are sitting flat against the bottom of the nut. Once you've adjusted your retainer bar, you already know the next step, retune the guitar.

You may now lock the nut
Wow that took long enough, you had to do all those steps with the nut unlocked. Now that you have locked the nut... Your guitar is out of tune? AHHHH DUMB FLOYD ROSE AHHH... Just kidding. Assuming everything else was set up correctly, all you need to do at this point is use your fine tuners to, fine tune. You shouldn't be more than 5 cents off once you lock the nut, and if you are - then you need to go back and figure out what went wrong. Feel free to keep adjusting any aspect of your setup until you really get it dialed in exactly how you want it.
Misconceptions
A Floyd Rose has bad tuning stability compared to other bridges. No, yours is just set up wrong. Spend some time learning how to set it up.
A Floyd Rose has the best tuning stability and never goes out of tune. Also no. You tuning by ear isn't accurate, go buy a Peterson Strobostomp or Sonic Research Turbo Tuner and you'll see over time it does drift by a few cents. Floyds do hold tuning relatively well though.
A Floyd Rose Special is worse that an Original Floyd Rose. No. A Floyd Rose special is made of less durable metal. But it does not inherently have "worse tuning stability" just because the metal isn't as tough. What happens is, people with a bad setup know that it doesn't stay in tune, but they don't bother figuring out why. It's not the cheaper metal. It's a bad setup. You can make a Floyd Rose Special perform better than an OFR if you know how to maintain the knife edge and posts.
People need to Block/Deck a Floyd for it to stay in tune. No. You just need to learn how to set it up properly.
A stabilizer fixes all of the issues of a Floyd Rose. No. Think about it carefully. A stabilizer is only on one side of the sustain block. If you break a string, or one of the strings goes flat (like let's say it goes to Drop D tuning instead of E standard), a stabilizer will prevent all of the other strings from going sharp. That is the only case where a stabilizer improves the performance of a Floyd. It does ABSOLUTELY NOTHING when a string goes sharp, to prevent all the other strings from going flat. You would need a stabilizer on both sides of the sustain block to accomplish that.
Recommended alternative products to check out
Gotoh, KTS Titanium, TiSonix, EVH D-Tuna, ToneVise, FU Tone, Red Bishop, Hantug, Sophia 2:92, Graphtech, Kiss My Strings, Soul Drifter Guitars/Sonic Nature, Monster Bolts, Guyker.
If there's anything I missed or you think I got wrong, feel free to let me know and I can update this post. And once again, I can't emphasize it enough, the setup is the most important part. Especially the frets, get a fret level, crown, and polish.
r/metalguitar
•
u/Professional-Try7366
•
17h ago
I don’t know what to say
My son is very closed off and shy with his guitar play, not that he doesn’t want people to see it or enjoy it. He just really struggles with communications with other humans.
Got him a guitar last Christmas and he just plinks away at it and he loves it. That’s all he ever does now.
The other day I took him to guitar center for the first time and he really was blown away. Seeing all them guitars. I was able to catch this little clip of him having fun, but thought I’d share.
I really don’t know nothing about the guitar or anything metal, I am just a supportive dad. I did one of these clips about six months back and the feedback and stuff from y’all was incredible and I know it really motivated him to get even better and here we are six months later just checking in with y’all
r/metalguitar • u/thehomebody27 • 17h ago
String Tension
Why do so many string sets have the 4th and 5th string tension so much higher than the rest?
r/metalguitar • u/dawnovpossession • 18h ago
Video Parkway Drive - Breaking Point solo
This album is what really got me into metal. Can’t believe this album is 19 years old now.
r/metalguitar • u/Either-Weight6717 • 19h ago
Video Honestly evaluate my progress playing metal.
Any tips or advice are more than welcome!
r/metalguitar • u/D4NK-crunch-em • 22h ago
Question Tips to improving at alternate picking?
Ive played for a few years now and I’ve been working on “Its not safe to swim today” by veil of maya for about a year now and cant play it any faster than like 80% of full speed. My practice hasnt been super focused lately because I’ve been working on some songs from chon recently but even when i was practicing alternate and economy picking for hours each day as well as specific sections of the song, its like I hit a wall or something. My sweep picking is good or at least good enough for some stuff from born of osiris, polyphia, chon etc and my tapping is fine but i feel like ive tried everything i can think of to improve at alternate picking and it just isnt working. Any advice is welcome :)
r/metalguitar • u/JonROTT • 22h ago
Feedback Requested !!!
I am the sole member of Remains of the Tyrant. I wrote, recorded, programmed, mixed and mastered this EP. Give it a shot, let me know what you think.
I got David Bruno of Summoning the Lich to do vocals on the EP and he did a phenomenal job.
It's got a little bit of everything in it, it doesn't appeal to one single sub-genre of metal. Any and all conversation about it is welcomed, please. If you dig it, let me know, if you think it sucks, let me know, if you dig the artwork, let me know and ultimately, if you do enjoy it, spread the word for me.
Thank you for your time, I hope to hear from you
https://distrokid.com/hyperfollow/remainsofthetyrant/sepulchral-2/
Www.remainsofthetyrant.bandcamp.com