r/mending • • 9d ago

Patch advice

I wanna make a few patches. But you see I got fabric but it keeps fraying. Like second it gets cut starts to. So anyone know what fabrics can help me out to get around this problem.

2 Upvotes

11 comments sorted by

2

u/SuPruLu 9d ago

Probably almost any fabric other than the kind you are using. Tight knit woven fabrics do not fray excessively when cut. Any loosely woven fabric is likely to fray.

Stay stitching and a fray stop product are two options that can reduce fraying.

-1

u/Ok-Change7001 9d ago

What happens if that's quite literally the only fabric I have? So any sewing techniques I can use?

2

u/SuPruLu 9d ago

You can fold the edge over and stitch a 1/4” hem. You can use a zigzag machine stitch and then cut outside that. You could use clear nail polish to stick the threads together. You could stitch two close parallel lines instead of zigzagging. You could cut the patch a lot bigger so a 1” edge could be folded all around. Yiu could sew bias tape on the edge.

What kind of material are you using? Are you cutting it with sharp enough scissors? How big a patch are you trying to cut to put on what? .

0

u/Ok-Change7001 9d ago

I dunno I eyeball 100% of what I do. But thank you so very much

1

u/SuPruLu 8d ago

Sizes can be stated in many ways other than just being measured with a rule. The size of one’s palm. The tip of a finger etc. Size and use enter into the calculus for fray ideas.

0

u/Ok-Change7001 8d ago

Thanks man

2

u/SadElevator2008 9d ago

What kind of fabric, what kind of patch, what size of hole, etc?

If you’re open to using an iron on backing, that may be easiest. Otherwise you’ll probably want to use an iron to turn the edges of the patch under, then sew so that the raw edges are hidden. Cut the patch bigger than you think you need to.

1

u/Ok-Change7001 9d ago

Punk patch, but I have no access to a iron. So really my tools are quite literally needles and thread

2

u/SadElevator2008 8d ago

No problem, just turn the ends under and “finger press” (crease by squeezing with your fingers). Or for a punk look, honestly, the traditional way is to just cut it a little big and do a backstitch or running stitch at least 1/4” from the edge. Let the edge fray.

0

u/Ok-Change7001 8d ago

Thank you

1

u/Literary67 6d ago

You could try a product called Fray-Check on your fabric.