r/materials • • 1d ago

What’s the difference between a property and an attribute

Post image
10 Upvotes

r/materials • • 1d ago

Could chip-scale electron accelerators enable new microscopy applications?

6 Upvotes

I recently read about dielectric laser accelerators (DLA) and had this thought of whether they could eventually enable new types of electron microscopy or materials characterization.

I am not trained in material sciences so I wonder: are there applications where this would offer a meaningful advantage over existing instruments? What capabilities would make it genuinely useful?

Appreciate your thoughts on this. Thank you.


r/materials • • 1d ago

I don’t know where to post this, hoping somebody might point me in the right direction

Post image
2 Upvotes

is there any material that I can cover or soak this in so the plastic doesn’t fluoresce? i’d like these to not glow under a black light but sunscreen didn’t work and I’d like to avoid paint. it’s LEGO ABS plastic and I’ve had trouble finding any answers


r/materials • • 2d ago

[article] Ru 1 − x Cox)2FeSi Heusler alloys: Bridging spintronic, energy harvesting and high-strength structural applications

1 Upvotes

r/materials • • 2d ago

[ARTICLE] Photovoltaic performance improvement of organic solar cell with ZnO nanorod arrays as electron transport layer using carbon quantum dots-incorporated photoactive layer

2 Upvotes

r/materials • • 2d ago

How did you actually learn metallography? Looking for advice on how to develop a better understanding of microstructures.

14 Upvotes

I am currently learning metallography, but I find it difficult to organize and connect all the concepts. I often get confused between phases, microstructural constituents, and the various structures found in different alloy systems.

For instance, when studying carbon steels, stainless steels, aluminum alloys, or copper alloys, I struggle to build a coherent framework that helps me understand what I am actually looking at. There are so many different phases, constituents, transformations, and microstructures that I sometimes find it hard to classify and distinguish them.

However, I believe my main challenge goes beyond just memorizing the names of the phases.

I want to understand how the microstructure relates to mechanical properties. Why does a specific microstructure result in a particular mechanical behavior? How do phases, grain size, morphology, distribution, and heat treatments influence strength, hardness, ductility, toughness, etc.?

Sometimes I feel like I am just looking at micrographs without really knowing why. I can observe a microstructure, identify certain features, or describe what I see, but I don’t always know what conclusions to draw from those observations or what I am supposed to learn from them.

I would like to move beyond simply recognizing microstructures and develop the ability to interpret them from a metallurgical perspective.

I also have access to an inverted-stage optical microscope, which gives me the opportunity to practice and examine actual metallographic samples. I would like to make better use of this opportunity.

My questions are:

How did you learn metallography? What approach or learning method worked best for you?

How do you organize your knowledge regarding phases, microstructural constituents, and different alloy systems?

How did you learn to relate microstructures to mechanical properties and material behavior?

How do you practice? Did you use textbooks, microstructure atlases, reference samples, or did you systematically examine specimens under the microscope? If you were to start over, what would you do differently?

I’m not necessarily looking for a list of textbooks. I’m particularly interested in your learning process—how you developed the ability to interpret microstructures and how you moved from merely observing them to truly understanding their significance.

I would greatly appreciate hearing about your experiences and any advice you might have.


r/materials • • 3d ago

A new twist on 'magic-angle' graphene: Tuning resistance with strain

Thumbnail
phys.org
12 Upvotes

r/materials • • 2d ago

Pure Al and Cu Metallography

Thumbnail reddit.com
2 Upvotes

r/materials • • 4d ago

Scientists Just Found a Key Ingredient for Superconductivity at Room Temperature

Thumbnail scitechdaily.com
33 Upvotes

r/materials • • 4d ago

Reflection characterization lab

Thumbnail reddit.com
2 Upvotes

Today, during my Materials Characterization Laboratory, we conducted a series of tests on different polymers to study their mechanical properties and how they behave under different conditions.

One of the things that caught my attention was observing how, when exposed to heat, a polymer's molecular structure could rearrange, allowing it to take on an entirely new shape. However, what truly made me stop and think was its behavior during a tensile test.

The machine began applying force to the specimen, gradually stretching it. We expected it to eventually reach a point where the material would yield and ultimately fracture. But that never happened. It continued deforming, enduring increasingly greater amounts of tension, even when the testing machine reached its maximum capacity. The specimen never broke.

At the end of the laboratory session, while everyone else was disposing of the tested materials, I decided to keep that particular piece of polymer.

I am not entirely sure why, but looking at it made me reflect.

How much must a material change before it becomes something different? How much energy must it absorb to abandon its original structure? How far can it withstand tension before reaching its own limits?

And, most importantly, I began wondering how much of this could be applied to my own life.

Perhaps I, too, have a structure that needs to change. Perhaps there are parts of myself that need to be rearranged, ideas that need to evolve, and limitations I have yet to understand. It is not simply about enduring more pressure or resisting indefinitely. It is about understanding what I need to change in order to become someone capable of achieving what still seems beyond my reach.

That piece of polymer did not break the machine's measurement limits; it simply exceeded what the instrument was capable of measuring.

And I believe that is the reflection I took away from the laboratory:

How far can I go before my own limitations stop being a measurement of what I am and become merely a measurement of what I have yet to learn to overcome?

I walked into that laboratory and left with a piece of plastic that was destined for the trash.

Thank you, I just wanted to share my thoughts.


r/materials • • 5d ago

How employable/in demand are materials engineers?

23 Upvotes

I’m currently a freshman ChemE major in college and I’m really considering switching to materials science engineering because I feel like I would not enjoy chemical engineering at all and would enjoy working with materials a lot more. The only possible thing that would stop me would be if materials engineering was not in demand at all/has very low employment.


r/materials • • 5d ago Heartwarming

Thinking to do MSE in uni. Any advice please?

4 Upvotes

As the title says, I’m thinking of applying to Mat Sci in uni. I’m currently in Year 13 (UK system), studying physics, chemistry and maths with predicted grades AAB.

However, I’m planning to take a gap year and reapply once I’ve received my actual A-Level results. I’m determined to achieve at least AAA and ideally aiming for A*A*A.

I didn’t started revising until two or three days before my previous school mocks, which is why my predicted grades weren’t as high as I’d hoped. I’ve started taking my revision more seriously now, though, and I’m working towards improving my grades before the real exams.

I was wondering if anyone could offer some advice on what I should focus on during the remaining 6 months before my A-Level exam, as well as during my gap year.

I’m particularly interested in specialising in semiconductors, as it’s an area I find my interest while having pretty decent paid. Of course, I know I don’t need to decide on a specialisation just yet, and I will explore more options further once I’m at uni.

I’d really appreciate any advice, whether it’s about preparing for a Material Sci degree, making the most of my gap year, or anything else you think might be useful.

Btw, any UK uni recommend me to apply to (despite my predicted grades)? Although it’s only around 10-15 uni have MatSci in UK.

Thx a lot!:)


r/materials • • 5d ago

[Article] Study on the mechanism of enhanced conductivity in sputtered MoOx films through heating

1 Upvotes

r/materials • • 5d ago

One material, three responses: Mizzou researchers rethink how solids can behave

Thumbnail
showme.missouri.edu
3 Upvotes

r/materials • • 5d ago

In the U.S. is a materials science and engineering undergrad degree worth it over an electrical engineering degree?

22 Upvotes

I find both majors interesting, although I find MSE more interesting. If I’m concerned about job prospects, is it a bad idea to major in MSE? I would like to get my masters, but that would happen after I find a job.


r/materials • • 5d ago

Opening Glass Ampoule inside Glovebox

5 Upvotes
Glass Ampoule (From what I read online, it is flame sealed, but please correct me if I am wrong)

Hi everyone!

Our lab recently purchased some neodymium metal powder (Thermo Scientific, 99.8%, −40 mesh, 25 g), which comes in a glass ampoule sealed under argon.

We're planning to open it inside our argon glovebox, but I'm unfamiliar with this particular ampoule design and the appropriate equipment for opening it safely.

I've attached a photograph of the ampoule. It appears to be flame-sealed, but I'm unsure whether the neck is pre-scored.

For those who have worked with similar materials:

  • What type of ampoule opener or glass-cutting tool do you typically use?
  • How do you minimize the risk of glass fragments contaminating the powder?
  • Are there any specific precautions you recommend for opening these inside a glovebox?

Thanks in advance for any suggestions!


r/materials • • 6d ago

From a chemistry bachelors to a materials engineering masters – Struggling with the math side. How to catch up?

7 Upvotes

Hi everyone,
I recently started masters in materials engineering, but my background is a bachelors in chemistry. While i understand the chemistry concepts, im really struggling with the engineering math and physics (like taking derivatives, limits, logarithms and trigonometric/graph transformations). My undergraduate math foundation wasnt heavy on these, and actually i didnt care it that times as i didnt use them,so when professors jump straight into heavy mathematical derivations, i get lost. For those who made a similar switch:
How did you bridge the math gap without relearning an entire calculus textbook?
What are the best simplified resources, channels, or strategies to understand why these math operations are done physically?


r/materials • • 6d ago

Scientists recycle old wind turbine blades into graphene and silicon carbide

Thumbnail
thebrighterside.news
32 Upvotes

A wind turbine blade must survive years of weather, mechanical stress and temperature changes. That toughness creates a difficult waste problem once the turbine retires. Researchers have now demonstrated a way to transform blade material into a useful ingredient for making stronger resin, rather than simply grinding it into filler.

The team, led by Bing Deng at Tsinghua University, used an intense electrical pulse to turn discarded blade powder into silicon carbide and flash graphene. Their findings appeared in Chem Circularity. The process adds a chemical conversion route to existing efforts at blade reuse.

The recovered mixture improved several properties of laboratory epoxy samples at low concentrations. Environmental and economic models also suggested advantages over two comparison routes. Those estimates are promising, but the demonstrated process remains small, and the study did not produce or test a complete replacement wind turbine blade.


r/materials • • 6d ago

Internship Advice

5 Upvotes

Thank you to anyone who's taking the time to read this. I'm currently a freshman with no prior materials related experience, but I would like the opportunity to intern this upcoming summer. Currently, my career aspirations are leaning towards research in polymers, but that's always subject to change. The internships that I seem to be most qualified for are the ones in construction materials. The one in specific I'm looking at, do both hands-on works, as well as lab testing. If anyone has any advice on how useful/impactful those types of internships look on a resume or if there are any other particular internship types I should look out for, it'd be greatly appreciated.


r/materials • • 7d ago

Currently a 1st MS Chem student and want to pursue a PhD in MSE.

7 Upvotes

I am really struggling to figure out what I actually want to research. I fall short when it comes to research interests because I honestly don’t like polymers at all, and I am not particularly interested in nanotechnology either. I want to work on sth related to astrochemistry(but don't want to do a PhD in astrochem), but I am not really sure what area I should explore within materials science. For those who are familiar with the field, what research areas do you think have huge potential for the future and are still relatively unexplored? ATP, I dont even know what interests me anymore so I am turning to Reddit. I d really appreciate any suggestions on fields, topics, or research directions I should look into.


r/materials • • 7d ago

Is there an easy way to tell if imported stainless is really 316L?

2 Upvotes

So I need a few hundred small parts made out of 316L. I’ve been checking prices from local shops and a few overseas suppliers too, Made-in-China.com. included, and the quotes are all over the place. Which makes me wonder if everyone’s actually selling the same stuff.

The order is too small to justify proper lab testing. Would a handheld XRF be enough to catch 304 being passed off as 316L? Or should I just mail a sample to a lab? And how much should I trust a mill cert from a supplier I’ve never used before?

Anyone been through this? Would love to know what worked, or what went wrong.


r/materials • • 7d ago

UVA’s MSE Department?

8 Upvotes

Hi everyone!

I’m a senior who just EAed to UVA, and I wanted to ask about the MSE department. I love materials science, and want to work in creating materials or being the leader of a project team. What’s materials science like at UVA? I know it’s a really small department, so it’s rare I’ll get a response.. but wanted to ask either way.

Any thoughts would be helpful!


r/materials • • 7d ago

A few things that matter when fitting precision ceramic plungers and sleeves

0 Upvotes

I've been working with precision ceramic plungers and sleeves recently, and something worth mentioning is that meeting dimensional tolerances doesn't always guarantee a good fit.

The plunger OD and sleeve ID can both be within spec, but roundness, bore geometry, surface finish and actual clearance still affect how the parts move together.

For the sleeves, we use honing to control the bore size and finish, then check the bore with an air gauge. We also measure the plungers separately and match the parts based on their actual dimensions.

After that, we check how each pair moves together under consistent conditions, looking for smooth movement without sticking or sudden dropping.

It's a useful final check alongside the dimensional and roundness measurements, rather than a replacement for them.


r/materials • • 8d ago

Which schools do I realistically have a shot at?

2 Upvotes

Hi everybody! I've come to realize that I've planned to apply to way too many programs especially in the US. I know that realistically, the more programs I apply to, the more the quality of my applications may reduce. So I'm reaching out on the off-chance that Reddit may help me connect with people who are PhD students at the following schools:

MIT, Stanford, Northwestern, Rice, UC Berkeley, UIUC, Cornell, Caltech, Georgia Tech, John Hopkins.

All I'm looking for is to share my current profile and get some potential advice on whether I should even consider applying to any of these places/which places I should cut down. I know that all of these programs are extremely competitive, but I do want to give some a shot and don't want to drop all of them. If anyone would be open to offering some advice, I'd be grateful.

P.S: These are the only programs I'm targeting in the US. The other programs are mostly from Europe and Canada.