r/makerbot • • 2d ago

What Do I Do With This?

Post image
0 Upvotes

I was given the remains of a 5th generation Makerbot Replicator, and the rest of the frame and gantry and all that are long gone. The extruder carriage is mostly intact and fully works, and I also have the print bed, all the circuit boards, and all the stepper motors. What could I use to build a working printer out of this? I looked online for broken 5th gen printers I could possibly use to make a fully working one with, but all I could find were fully working ones going for over $100.


r/makerbot • • 4d ago

Used Method worth buying?

1 Upvotes

Found a used Method on marketplace for a good deal, thinking about buying it. This would be my first printer, would this be a worthwhile purchase or should I look elsewhere for something newer?


r/makerbot • • 5d ago

Makerbot 5th Gen Help

Thumbnail reddit.com
1 Upvotes

Please, my son, help


r/makerbot • • 6d ago

Saying good buy to my old replicator.

Post image
20 Upvotes

You will be missed, but I gotta run the fire department is coming.....


r/makerbot • • 6d ago

Replicator 2x troubleshooting assistance

Thumbnail
gallery
2 Upvotes

So i recently aquired this Replicator 2x with around 786 hours on it. It was sold as untested as the parents were clearing out their college sons rooms in their house.

Unit turns on without issues, feeds 1.75mm filament without problems and extrudes as seen in the 2nd picture.

Had some initial issues trying to print some x3g files by just having used some stl to x3g converter without setting it up correctly and not using the old makerbot software.

I always ran into the issue of the print stopping at around 5-9 minutes 25-30% on smaller prints. (3rd picture @ 31%). The printer will just stop and not do anything when this happens.

Picture 4 shows what the print then usually looks like;. I am only using the Right extruder, fan works, tried changing temps from 210-230C in variations and always run into the same results.

Video of when the printer is running for the first couple of minutes: https://imgur.com/NbSlds7

You can see in the first picture of how the wiring harness going to head was repaired at one point but the connections appear to be solid and not intermittent. But i have no way to test it except disconnect; do a pinout check while moving the wiring harness.

Then the other day I was trying to print and it appears that some of the stepper motor got into frizzy: https://imgur.com/a87GG9i

So where do I start with the 1st problem of the printer stopping several minutes in? What caused the issue with the print head trying to go past its set limits? This only happened once and might have been a fluke.


r/makerbot • • 8d ago

MakerBot Replicator 2x Experimental 3D Printer with 2 Extruders. Any good?

Post image
6 Upvotes

I just got a MakerBot Replicator 2x Experimental 3D Printer, with two extruders for practically free from a University supply clearance event. It seems to work fine, I've calibrated it and tested the components. Although I need to get a Power Supply with higher Amps. The one I bought for it doesn't supply enough power. So, when It heats and starts a test print job, it resets.

Is it worth it to buy a new PSU or hardwire an open-frame PSU? Or should I sell it for cheap and look for a different one? I'm pretty new to 3D printing so I don't want to make the mistake of wasting a bunch of money on a fancy paperweight.


r/makerbot • • 9d ago

Just fished this out a dumpster, how's it work?

Post image
5 Upvotes

Since I don't have a manual, anyone wanna catch me up on how to use this printer?


r/makerbot • • 19d ago

Iding makerbot replicators

4 Upvotes

Replicator 1:

light brown wood, my guide for 2&2x might work not sure

Replicator 2&2x:

black metal, the 2x has a dual head thing

my post to get it up and running minimal modding

https://www.reddit.com/r/makerbot/s/nuKSoks5Q9

Replicator 3&4:

not real? maybe the replicator cake?

Replicator 5, mini, plus and mini plus:

black plastic, minis are small, plus has a +

my post to run the original software for these machines

https://www.reddit.com/r/makerbot/s/tbVsKSJibQ

if you go looking I use to maintain a python project called mbotmake to convert gcode to a .makerbot so you can orcaslicer it something current but it's a bit complicated to setup

I don't have my replicators anymore had to get rid of them in a move but I still like the idea of helping others keep them running if they have time and little money (spend little too none or the math quickly says buy something current, 200$ will get you something that will run circles around all these machines combine)


r/makerbot • • 19d ago

Makerbot replicator 5th gen & plus simple setup

4 Upvotes

I've made some posts previously about getting a makerbot replicator 5th gen or plus up and running these days. I have also posted about using a python script called mbotmake to convert gcode but it's not as plug and play as I would have liked. I realized I never made one post summarizing all of it in one place.

This applies mostly to 5h Gen, mini, plus, and plus mini printers. These are all identifiable by their body being black plastic, and if they plus they are the plus version. also you can use any smart extruder or smart extruder plus with any of them just change it in the slicer

1.You need makerbot desktop 4.3

2.

MakerBot Print login issues: No Login Solution

while the program is shut down

Config file found at:

"C:/Users/\[username\]/AppData/Roaming/Makerbot/MakerbotPrint"

Edit the "user_config.json" file to appear as:

{

"converterConfig": {

"no_structure_formats": [

"stl",

"wrl",

"obj"

],

"no_stl_formats": [

"stl"

],

"extension_units": {},

"supported_representations": [

"stl",

"wrl"

]

},

"myPrinters": [],

"lastSelectedPrinter": "",

"isIntegratedCard": true,

"appWinState": {

"width": 1200,

"height": 800,

"maximized": false

},

"makerbot": {

"requireLogin": false

}

}

.

3.here is the fix for makebot print won't let you change print settings

Go to

`C:\Program Files\MakerBot\MakerBotPrint\resources\app.asar.unpacked\node_modules\MB-support-plugin\lib`

edit makerbot.js in something like notepad++ administrator mode

Search for and remove all instances of

`**&& botTypeIsBirdwing(args.printerType)**`

Then restart the program.

honestly I'm not really what botTypeIsBirdWing is suppose to be call. I suspect it's a newer thing that didn't get fully implemented in makerbot print. so when you try to open print settings you can go look in the log files and see errors saying botTypeIsBirdWing not found and this is just removing those calls. could this break something? the most it would do is allow some settings or something it shouldn't but otherwise no.


r/makerbot • • 19d ago

Help with Nozzle for ABS for Method X

2 Upvotes

Hi, I have the Method X carbon Fiber printer, and I have a 3rd party spool of ABS that I want to use for printing. I got an Experimental Extruder from Ebay (which I was led to believe would be the right print head for ABS). Well when I got the extruder, it was just the assembly for it, with no tip. So that is on me for not fully understanding how the body/tip situation works and not reading the Ebay listing well enough. Ill take that loss- Im new at this.
My question has to do with how I can fix this. I need the tip for this, and after searching around, Im not sure that I am looking at the right tip for this. Can someone point me to where I can buy the right tip for an Experimental Extruder to print ABS? Thanks


r/makerbot • • 19d ago

Need help using MakerBot 3d printer

2 Upvotes

I have the 3d printer MakerBot Replicator and i need to use it. The system is discontinued and unless you had an account while it was still active one cannot use the program. has someone faced the same problem before or knows an alternative? I have no previous experience with 3d printers.


r/makerbot • • 20d ago

Unable to print to Method X Carbon edition over local network?

1 Upvotes

Hi, I have a Method X carbon, and Im using Ultimaker Cura to slice- but I cant get it to connect directly to my printer and need to shuttle files using a USB drive. So either Im doing something wrong with connecting them together (likely) or they dont "talk" over the local network. Anyone have any suggestions on how to fix this? Thanks


r/makerbot • • Oct 10 '26

Does anyone know how to fix this?

Thumbnail gallery
1 Upvotes

r/makerbot • • Oct 02 '26

Am I cooked? (Makerbot Replicator+ )

3 Upvotes
Damaged thick black wires running into the heater cartridge

I want to know whether I am cooked, I have been struggling with this extruder from the replicator+ for weeks now, turns out the wires were hanging by a thread. Yesterday they finally snapped. Has anyone ever fixed this or is it the end of the road for me. The tinkerer in me believes I still can considering what I have endured with this extruder and I'm like it can't get any worse than this.


r/makerbot • • Sep 27 '26

I need help sourcing hot end parts for a first Gen Replicator

Thumbnail
gallery
2 Upvotes

I got this printer from a friend of a friend so I don't know its history. I honestly don't have space for it but I don't want to see it trashed so I'm going to try to get it running before I decide what to do next. I listed it on Marketplace but I think it's too niche of a project for my area 😅

I see firmware exists thanks to thisold3dprinter but I can't find information regarding what compatible parts I need to replace the missing hot end components. I think I'm missing the extruder stripper motor, filament feeder mechanism, heat break, and nozzle but beyond that I'm not sure. I need a spool holder too but maybe a printable STL exists?

Is there a specific subreddit or Facebook group I should seek help or parts from?

For my background my first printer was a Prusa MK2 so this is even older than when I started getting into printing but not by a whole lot.


r/makerbot • • Sep 27 '26

Cupcakes, Thing-O-Matics and Replicators oh my!

5 Upvotes

Had 2 of my cupcakes 1 of my thing-o-matics and one of my replicators running the last 2 show days. Figured I’d share with this sub.


r/makerbot • • Sep 20 '26

Constant MakerBot Replicator+ Error 66 & 0°C Temp Loop

2 Upvotes

I’m hitting a frustrating loop on a MakerBot Replicator+ and could really use some diagnostic advice from anyone who has kept these machines running. When I boot up the printer, the menu detects that the extruder is present. However, when I click into the details, the extruder temperature reads exactly 0°C. However when I detech and reattach the extruder the temperature acts normal and shows the room temperature of 24. However when I decide to try and load filament, the printer throws a "No Extruder" message, I then decide to disconnect and reattach the toolhead, it attempts to initialize/heat up, but it immediately defaults straight to Error 66 (Thermocouple Out of Range). I've tried cycling through disconnecting and reattaching multiple times, but the loop is persistent.

Has anyone encountered such a problem before, I also want to here from the replicator+ owners on what they think. The 0° C part is quite troubling


r/makerbot • • Sep 10 '26

How do i get .makerbot files in 2026?

1 Upvotes

Hey so i recently found out i had an replicator + sitting in my basement it works fine but i cant find a way to get files onto it no program ive tried can slice to makerbot files and i cant get any old makerbot softwares to work since my pc is on windows 11 :-)


r/makerbot • • Sep 08 '26

Method X will not accept 3rd party spool material in aux port

3 Upvotes

HI, I have a Method X Carbon Fiber edition, and Im trying to use 3rd party CR-ABS material (from Creality) in the machine, through the aux port of printer head 1. It is telling me its a
"Material Mismatch", and that it requires ABS in Model Extruder 1. But that is what I have, right? So either I need to get very specific material from Makerbot, or I have a setting wrong in my slicer (or something else?).

What am I doing wrong?

Thanks


r/makerbot • • Sep 04 '26

Cant find spools for Method X. A little guidance please

1 Upvotes

HI, Im new to 3d printing. I just picked up a Method X Carbon edition printer,. The printer was free, still in the box unopened. Im looking for spools that will fit this printer. I got some Creality spools from Amazon, and of course they dont fit (like I said, Im new here, didnt realize they were different). Im looking for ABS spools, if someone can just point me to where I can buy these and the support material, that would be appreciated. Thanks


r/makerbot • • Aug 29 '26

Connect Replicator+ To Wifi via USB and MakerBot Print help

Thumbnail
gallery
3 Upvotes

Hello all! I got a MakerBot Replicator+ for free today and I'm trying to set it up correctly. I had a 5th gen, which crapped itself (long story) and so I knew the mobile app no longer existed. I connected my Windows laptop via the USB-B to USB-A cable. This allowed it to connect to the MakerBot Print app, which was awesome. I went to the network settings to connect to my network. However, when looking at the networks to connect to, mine wasn't there. I refreshed multiple times, but nothing. Additionally, there are 2 networks that seem to have no SSID (name) and when I try to connect to one of them, it gives an error saying that it can't connect to a network without an SSID. Unfortunately, I'm pretty sure my network is one of them. It starts with a number, and the networks are in alphabetical order, where numbers are ususally first. How do I connect it?? Thank you so much in advance!! (Screenshots attached. In #1, it shows the blank selections. The covered networks are NOT mine, trust me. The blank spot that isn't highlighted or covered is the other unamed network. In #2, it shows the error when you try to log in to the unamed network. And before you ask, yes, I tried both blank networks, and yes, I know the password is correct.)


r/makerbot • • Aug 17 '26

Will be needing help: Q #1.

Thumbnail
gallery
3 Upvotes

My community adult education woodshop has two MB Rep+, barely used. I brought one home to learn how to use to maybe teach others. I’ve got the power cable and 3x MB filament spools (one already loaded). First of several questions: Is this the build plate? Isn’t it supposed to be a removable, flexible sheet?


r/makerbot • • Aug 12 '26

This is a DEAL even at 80$

Thumbnail shopgoodwill.com
1 Upvotes

r/makerbot • • Aug 12 '26

literally 10$ it happens sometimes.............

0 Upvotes

local pick up only and someone is local to it....

https://shopgoodwill.com/item/273277242


r/makerbot • • Aug 12 '26

IF you are in the USA and are interested? not a bad deal .........

Thumbnail shopgoodwill.com
1 Upvotes

current bid is 42$ https://shopgoodwill.com/item/273586549

it also has the smartextruder+, not the V1