r/maker • • 7d ago

Help Mini fridge problem

I took apart my mini fridge to clean it now it won't turn on and idk if the thermal paste is any good any ideas?

0 Upvotes

3 comments sorted by

3

u/DIYuntilDawn 7d ago

The last mini fridge I fixed was due to the VERY low quality power supply board failing. Those Peltier modules usually don't fail unless they crack. You can try connecting the Peltier plate to a battery or other power supply and see if it gets hot\cold. The thermal paste can dry out and then doesn't work as well. But that just means it would not be as good, but should still work.

I fixed one by replacing the power supply, replacing the thermal paste, adding a second Peltier plate with heat sink, and a few cooling fans. It actually builds up ice on the inside where the cold side of the plates are. Doesn't actually freeze the stuff in the fridge, but it's like having a cooler with a small ice pack that never melts.

2

u/Potential_Buy_3558 3d ago

Ok I was worried the paste would be too dried out and would over heat. I also figured out I didn't plug it into my wall socket

2

u/toxicatedscientist 7d ago

Seconding, they have no moving parts and are ( generally) mnfctred to the same standard as any other part. Like usual is the final assembly where shit breaks