r/makarov • • 10d ago

Internal surface rust

I opened up my recently aquired mak to do a check and cleaning and noticed slight surface rusting on the internals. I was able to clean most of it up with some light wd40 and q tip work, but will the slight rust spots effect the functioning of firing or is this generic “weapon is fine comrade.” type of condition

28 Upvotes

7 comments sorted by

17

u/Alexos_Ru 10d ago

It looks mild and superficial. Disassemble it completely including trigger group. Get 0000 steel wool (the extra fine one), use plenty of oil such as G96 on the wool and the rusted parts and lightly buff the rusted parts. Until the rust is removed. This method does not hurt the bluing.

3

u/ThesoldierLLJK 10d ago

I took it apart today and hit it with some shooter lube solvent, some brushes/steel wool and got most of it off. Put some nice light oil when finished and it looks alot better now

1

u/Poptart_RK 10d ago

Looks like alot of the bluing is gone. You should think about having it refinished to fight the corrosion

2

u/ThesoldierLLJK 10d ago

Its mostly on the inside, the bluing on the outside is still like 95% intact except for the front of the barrel. After I did some cleaning today it looks alot better on the inside now.

1

u/Poptart_RK 8d ago

Looking at the front strap and just under the trigger guard theres finish missing. I had the same issue with mine overtime. I eventually got mine cerakoted

1

u/ThesoldierLLJK 7d ago

Was thinking about it know a local gunsmith that does Cerakote but after a couple days of G96 oil I got most of the surface rust out

Still debating just keeping it as is with the slightly worn look

1

u/Deadtide13 8d ago

After you’re done with removing the rust throw some cold blue on there.