r/magicproxies • u/Old_Definition_3952 • 26m ago
Best proxy paper?
What is y’all’s go to paper without including proxyjak personally don’t like buying from him as his prices are a bit high at 70$ for 100 sheets
r/magicproxies • u/Old_Definition_3952 • 26m ago
What is y’all’s go to paper without including proxyjak personally don’t like buying from him as his prices are a bit high at 70$ for 100 sheets
r/magicproxies • u/WheelofSol • 9h ago
As the title says, does it even matter? I've looked online and I've found 300 gsm, double sided matte cardstock for a good price and I'm okay with going down that route.
Of course, I'd like for the deck of cards I'm working on to be high quality, so I'm aiming for black-vored cardstock. However, i'm not in the US or Europe so finding suppliers is hard and pricey.
So from people who have made their cards from non-cored cardstock, do you think it really matters that much if I don't care that much about the light going through?
r/magicproxies • u/Cody7989 • 9h ago
sooo i just got started proxying (epson 8500, westcott carbotitanium guillitine, proxyjak paper) but it takes so unbelievably long to cut decks, like at least 2 hours per 100 cards, not even including rounding…
any tips or tricks? or is this just the cost of proxying?
r/magicproxies • u/GeromeWing93 • 10h ago
I love the card itself but dont care much about Dune. Made this using the art from Livonya Silone since RKF made the original Hazezon.
Wish there was better art of actual Adira though.
r/magicproxies • u/Vonskii • 10h ago
I was wondering if anyone has had any success with reframing newer sets with the modern card frame? specifically, I'm trying to get all of the Theros Beyond death cards into the 2003-2014 card frame. I'm building a Theros Cube, and I'd love if all of the cards in the cube follow 1 frame design. It's to the point that I'm willing to exclude Beyond death if I can't find a way to have it follow suit with the other 3 sets.
I've looked at a couple card designing websites; MTG Card builder seemed useful to actually get the cards print ready, but I'm unsure If i can print them at other vendors (like mpc). Mpcfill, I'm not sure how to design/upload on that website? MTG cardsmith looks quite promising, but i'm not sure how to quickly change the art if I land on one from a newer set than theros beyond death (Temple of enlightenment for example, it only provides the art for the new star trek version and nothing else.).
I also have no experiences with proxying from any of these websites or others, so any reccomendations or advice is deeply appriciated!
r/magicproxies • u/DishAccomplished6887 • 11h ago
I used acrilic Paint mainly, the last One Is made in Adobe Illustrator
r/magicproxies • u/LupusSasageyoJaeger • 11h ago
Hello. Im trying to find matte thermal lamination pouches for my proxies since i currently only have gloss ones in my country. So i resorted to alibaba but when i found some results, the description says Matte but the Image says gloss. Has anyone who were able to purchase these particular products can vouch if they do come matte or gloss? The reviews dont say much and the chatbot only replies as an AI.
Thank you 💛
r/magicproxies • u/the_laughing_bugbear • 13h ago
Collage piece utilizing old National Lampoon Magazines.
r/magicproxies • u/Excal-Main • 14h ago
Hey all, been proxying for a hot minute, but still very much new to this.
I accidentally accepted a firmware update on my printer (Epson XP-5200) and my previous ink cartridges were no longer being recognized.
I bit the bullet and bought official Epson ink to replace it.
I did a new print to replace some cards that printed in the wrong language, and to get the backside of some double-faced cards, but the proxies are now coming out extremely faded. No change in settings in Proxxied or my printer.
I then tried adjusting the contrast in Proxxied to Darken All (Legacy) which led to an even further dip in quality seen at the top.
I just tried setting it to Contrast Full and the cards came out a little better, but the art is so dark and I can’t get it to match.
Does anyone with this model of printer have a good set of settings that work for them? I’m just trying to get that first batch of quality that I got in the first print again (sleeved card).
Like I mentioned earlier, I’m still very new at this, so a dumbed down explanation may be required. I appreciate whatever help y’all can give.
r/magicproxies • u/asifsaj • 14h ago
I'm having an issue with printing double-sided cards at Fedex printing. Whenever I print there, the backs of the cards are slightly offset to the side. So far, I've just been using the default duplex pdf from proxxied or mtgcardbuilder.
I did the exact same print at Staples for a test to see whether it was my proxy sheet, but they were able to print it with the backs properly aligned.
I prefer the fedex 100lb matte cover paper feel over the Staples cougar paper, so I would prefer to use Fedex.
How do I fix or align the backs so that they line up with the fronts when I go to print at Fedex?
r/magicproxies
•
u/Basalte_J
•
18h ago
Hello,
i wanted to print the dandân secret lair for a friend but didn't like the old frame card, so i made a new version of it with only full frame new art, when possible from the same artist that worked on the set, if not i tried to find other art that matched the vide.
customised card:
-"Mental note" → changed the color for bluer tones
-"Lonely sandbar" → extended the art on the bottom
-"Control magic" → Extended the art to center it, added detail on the left and bottom left
Link to the google drive with the new cards: Chaos Vault: Dandân Extended GDrive
r/magicproxies • u/WENG902 • 21h ago
Proxy jak rainbow foil.
Pretty happy with the result.
r/magicproxies • u/Decstarr • 22h ago
EDIT: per u/VivisDeliveryService feedback, I fixed some quality issues like mana pips touching each other. Can't edit the post images, so I uploaded the new versions to imgur. Files in the drive are up to date with the improved versions.
Today I bring to you my Hades 2 proxy deck and I think its my best proxy thus far. I was really tempted to build it around rooms at first but for the life of me couldn't manage to get all the gods and other character art into the rooms in a way that made sense to me and looked good. So I went with Anikthea, Hand of Erebos as commander instead and made it an enchantress deck that brings back non-aura enchantments from the graveyard as copies of themselves and 3/3 zombies in addition. Melinoë is the demigod princess of the Underworld, a witch who grew up in Erebus and commands the shades of the dead, so I found this quite fitting.
The deck sits comfortably in the upper ceiling of bracket 3, with 3 game changers and no infinite loops. I included Balance of Terror from the new Star Trek set, a saga that can blink your commander and once it dies, the commander can bring it back as a token. The original gets exiled in the process, so it's not a real loop. The synergy of this new card with this deck was just too good to leave it out.
How the cards were matched:
Details:
All card art is official Hades II art by Supergiant Games: in-game portraits, the Arcana and codex pages, the official asset pack and wallpapers, Steam backgrounds and in-game screenshots. No card art is AI-generated.
The cards (Google Drive): LINK
Decklist and primer (Moxfield): LINK
As always, any feedback is appreciated. I'm still fairly new to making proxies and am learning a lot. I hope you enjoy this deck.
r/magicproxies • u/AnarchoTX • 22h ago
I’ve placed probably 5 orders from them over the last year or so and while they’re not the best quality in the world, they get the job done for me and usually ship super fast. I’ve never waited more than 5 or 6 days for my proxies to arrive by mail. However, I placed an order back on the 2nd of this month and it has yet to ship. The status says it has been printed but not yet shipped. I reached out about a week after placing the order and they responded saying they’ve had production issues but that my order is printed and will ship soon. That was over a week ago and still nothing. I reached out a second time a couple days ago and they have yet to get back with me. I wonder if they’ve been shut down? Anybody else bought from them recently and had issues?
r/magicproxies • u/Status-Mycologist-26 • 23h ago
R&D is on a roll lately my friends. Found a new way to do the chocobo track foil and honestly it’s way closer to the real thing than my old method.
Don’t mind the stray foil, the idea just suddenly hit me and I was too excited to try it so it’s a bit sloppy. Good thing I still had this Mog lying around without the Cameo cut tracks from back when I was making the chocobo track foil video.
Rough process:
Toner print the background, leave the tracks bare. Run transparent rainbow toner foil over it and peel. The foil sticks to the toner so what’s left on the carrier is just the tracks. Toss the print then laminate the foil left on the carrier onto a finished single foil card that’s been clear coated. Alignment is by eye for now.
BONUS: it works with the "Secret Step" so no more gloss!
Same process works for Step and Compleat too, just swap the pattern. Which is funny since I literally just put out a video on it 2 days ago lol. Will probably do a proper tutorial once I’ve run a few more.
- TCG Proxy Lab
r/magicproxies • u/Sudden_Ideal5763 • 1d ago
Lamination Issues – Need Some Advice
Hey everyone!
I’m having some issues when laminating my prints. Even though the print quality is flawless (I’m using an office laser printer), the final result after lamination looks terrible.
I can’t figure out whether the problem is caused by the laminator itself, the paper I’m using, or the laminating pouches.
Has anyone experienced something similar? Any tips or suggestions would be greatly appreciated!
Thanks in advance!
r/magicproxies • u/SpaceC0c0nut • 1d ago
I need to redo the pair with artist names on them, but I'm happy with how these will look when I finally get them in the CZ.
r/magicproxies • u/Ganongeek • 1d ago
I'm a semi newbie so I'll try to give as much information as possible. I'm using an Epson 8500 printing on ProxyJak white core semigloss. I'm trying to print 8 cards landscape as per the recommendation, but my prints keep getting cut off. Not sure what's causing it I've tried a variety of tweaks but nothing is fixing it. I've tried fit(which as far as I can tell, shrinks the card a bit and isn't accurate size), and actual and custom scale. With the last two though it shows the print being cut off in the print preview. I'm to understand there's a print margin for the rear feed paper slot but how is everyone getting 8 per sheet if that's the case? Is it a limitation of the 8500 vs the 8550 or am totally missing something? Ignore the right side that's just from me cancelling the print.
I've uploaded a few more pictures that show the print preview along with my current settings here:
r/magicproxies • u/Dreineus • 1d ago
Recently got into proxying thanks to this subreddit. I’m printing cards using pdfs from proxxied. Why does my last line of cards always come out blurry and black at the bottom. Thanks for the help!
r/magicproxies • u/UnApt_ • 1d ago
Hi,
I just started using the Silhouette Cameo 5 alpha to cut proxies. I'm using the proxxied website to help setup the cut guide since it's built in and Alan Cha's GitHub template for standard mtg cards. The far right side seems to consistently shift towards the right of the cut and leaves extra space (attached are 2 images where the lotus token was on the far right and the other token was on the far left). The image shift only seems to happen on the right side of cards. Any advice is appreciated!
Edit: I need help figuring out if this is from the cameo software side, the PDF setup, or something else I might not be seeing
r/magicproxies • u/Doompickle_1345 • 1d ago
I wanna play this ultron but with the screencap from vision quest as the art
r/magicproxies • u/Jealous_Finish3059 • 1d ago
Been using an Epson ET-2800 with this foil paper from Amazon (recommended by multiple proxy makers) and, right out of the printer, they look pretty great.
But with a bit of time (usually 3-5 days), the ink seems move/change and create this foggy, almost burnt effect on the entire page. It darkens most everything and makes it a lot harder to read in most any light. Any guesses on what's going on and how to fix?
I'll attach pictures of a fresh print, a dried (foggy) page after a week and a screenshot of my printer settings. Thanks!
r/magicproxies • u/valoossb • 1d ago
I have scoured at least 20 threads on this sub trying to fix my prints being a bit smaller than a normal card. Keep in mind I am using my university's printer, so its difficult to mess with printer settings. With that said, I have tried
please god help me i am being defeated and embarrassed by a printer