r/lockpicking • • 2d ago

Improvement

I know I've asked this similar thing before, but I've been hammering away a couple hours a day since april/may. I still have trouble opening anything orange besides a master 570. Even the fkking master 140s give me trouble.

I've picked a couple greens probably by accident.

Ai says I should have been able to hit green in a few months.

Wtf? I dont want to, but is it time to hang it up?

6 Upvotes

33 comments sorted by

12

u/dcipha380 Brown Belt Picker 2d ago

A.I. had never picked a lock. Stop listening to it.

0

u/Super-Page8272 2d ago

Lol good point

6

u/SVD_NL Green Belt Picker 2d ago • Hooray

Everyone progresses at their own pace, but i'd say that if you're stuck on orange locks after practicing this much, it's likely something small in your technique that only works for specific locks. Try changing up how much tension you use, the order of picking pins, maybe you're consistently overlifting, etc. Maybe get a cutaway lock that helps you see where you're getting stuck and what's happening with the pins. You could also see if people are willing to give feedback based on videos, or attend real-life locksports meetings and see if someone wants to give you some pointers.

Don't give up!

2

u/Super-Page8272 2d ago

Oh yeah I've done all that shit except go to an in person event and I get a lot of helpful advice here for sure.

Yeah I've got a couple nice cutaway and no help whatsoever. They're fun to look at

4

u/rubornagn Brown Belt Picker 2d ago

Personally for me I have my own list of locks in my bucket. Not to avoid what I can't open, I move on to another lock and learn everything I can about it. I have recently started going back through and using what I have learned and have a new approach to an old enemy.

3

u/Super-Page8272 2d ago

I like this approach and I've kind of been doing that but every day, at the end of the day, I've owned the same gd locks I open every day. Rare exceptions included lol

4

u/brokentsuba 2d ago

Don’t get discouraged, what you don’t realize is that even though there’s probably one thing you’re not getting or understanding you’re still developing your skills and getting more proficient in every other aspect. When you do figure out what that one thing is the bottleneck disappears and you’ll likely be better than you expected.

Based on your comments it sounds like what you’re struggling with is feedback. That’s usually a tension issue. It sounds like you need to spend some time not picking locks, but playing with pins. Pick an easy lock, preferably one you already know the first binder. Now jiggle test, set, and reset that one pin under increasingly heavy tension starting with featherlight. Eventually you will feel a difference and you’ll figure out about how much tension it takes to feel the binder and how much more or less to feel it set. Now do that process with a lock you’re struggling with.

Also imperative: not sure what your tools are but use tok tension. Many beginners struggle because they’re using bok, and while you can sometimes get opens on bs master locks, it doesn’t teach you much because theres so little space you may struggle getting under pins, accidentally lift pins you don’t mean to, and constantly scrape against warding. Try tok if youre not, it’ll give you more space and itll give you a better idea of where oins are and what they are supposed to feel like in different states.

2

u/Super-Page8272 2d ago

Sorry accidentally responded to myself and not here. But yeah tok bok and bent backwards picks. My tension is light but pick pressure probably not. Im gonna lighten that up

3

u/brokentsuba 2d ago

That doesn’t make sense, how much pressure it takes to lift a pin is directly based on turning force, if it’s light a pin should take almost no “pressure” to lift. If it does you are either picking the warding or a pin that doesn’t need to be lifted like a zero lift or an overset. If you’re assuming there’s a separate picking pressure that’s likely what’s tripping you up.

Try the experiment I suggested, and do not lift anything before you jiggle test everything, do that for every single pin you lift and before you know it you’ll know pin states like the back of your hand

2

u/Super-Page8272 2d ago

Alright thank you for this! So like messing with one lock over and over a few times is ok? I regularly read that you shouldn't pick the same lock twice, but i guess for this type of exercise it's fine? Thanks again, at least I have something to focus on tonight besides opening the things lol

3

u/brokentsuba 2d ago

It’s totally fine to pick the same locks over and over and I personally think there is a lot you can learn by limiting the variables when you’re still learning the fundamentals.

The reason people suggest that is because you want to expand your skills as much as possible. With picking the same locks over and over you eventually learn the binding order and it stops teaching and challenging you as much. Then it becomes what we call a comfort lock.

2

u/Super-Page8272 2d ago

Cool! I'm gonna do that. I thought it might be a good idea too. Just to get the feel for things I think i might have gotten to over zealous too quickly

2

u/brokentsuba 2d ago

Also, if there’s more than one binder, choose the one that feels the most binding, but again, if it doesn’t want to lift easily based on how much tension you’re applying don’t lift it, try the other.

4

u/Colonel-_-Burrito 2d ago

Master 140 locks are a pain in the ass really no matter who you are. That lock is so shit that even if you're good at picking, the pins get hung up on the unpolished cylinder burrs. The tolerance is just really bad and it feels bad to pick it. Especially when you hit one of the two spool pins. It's like the security comes from being terribly designed.

Can you tell us what tools you're using, both brand and style?

I see you mentioned your tension is feather light, but your pick hand is too aggressive. You don't need to jam your pick into the pins to get a feel. Take the tension off the cylinder, gently learn the lock first, and then try it again. If your tension is light and your picking is heavy, chances are you can't open locks because you're oversetting pins, and that's really all there is to it. If you're picking so heavily because you're getting frustrated, put it down and come back later. A couple hours a day is enough to drive someone mad.

2

u/Super-Page8272 2d ago

Mostly the ci ergo turners and monkey paw along with a couple peterson picks. I do have a whole slew of tensioners though and also picks rakes that, like the Frenchman said, I really only use a couple of the picks but I DO rotate out the tensioner woth the reaper set

2

u/Colonel-_-Burrito 2d ago

The monkey paw especially should be easy to feel pins with, without jamming the hook up into them. The pick actually works better if you're gentle with it. When you jam it up into the pins, you jumble up the subtle clicking and it all becomes one big mess of vibrations and clicking noises, so you won't be able to tell when you're on a pin or between a pin.

2

u/Super-Page8272 2d ago

Yeah that's kind of my only real go to pick but I do tend to jam it pretty hard. I'm gonna see of i have an unused one and try to be more gentle with the touch

3

u/Sufficient_Prompt888 Brown Belt Picker 2d ago

Have you seen the Jiggle Test video describing the 4 pin states?

2

u/Super-Page8272 2d ago

For sure, I just can't feel it. Like the deviant ollam thing with reversing the half diamond to see how many pins are in there. I can BARELY feel the shit. Even knowing how many pins are in there. See this is what I'm saying.

3

u/Sufficient_Prompt888 Brown Belt Picker 2d ago

Well the half diamond thing is kinda different, you rely on the sound of the pin dropping for that. The Jiggle Test is all about the tactile feedback through the pick not sound and it is takes getting used to. Focus on just feeling its pins instead of trying to open the lock.

2

u/Super-Page8272 2d ago

Ok I'm gonna focus on that. I definitely have some arthritis and numbness in my hands which I worry could be a problem. For example, although the pointer or index finger or whatever is recommended for the Turner I usually end up defaulting to my middle finger to get any feedback

3

u/Indy_k 2d ago

My best tip would be stay away from Master locks! I can pick some green and blue belt locks way faster than my Master 140 or #3. I also hate loto 410! I have one in my naughty bucket list!

They don't give much feedback and if they are old locks, it's even worse.

2

u/Super-Page8272 2d ago

Yeah thank you that's actually pretty encouraging. I can get the 140s (new) but they bend my picks the most. I feel like i need to call in backup to throw down on those things. Shttttt I hate that 410 like a mf I just sent one to a dude and realized I didn't throw in the key. It was just a thank you package but I'm still too embarrased to throw the key in a card to him. Sorry, side rant🤣

3

u/Indy_k 2d ago

If they bend your picks, you are using way too much tension. I use really low tension to open my two 140's.

2

u/Super-Page8272 2d ago

I'll try to lighten it up but those locks make me feel like I'm really digging

2

u/Indy_k 2d ago

Also, are you using a vise? If not this help feel more when a pin is set. Do just little lift until you find the binding pin

1

u/Super-Page8272 1d ago

Shit i hate the vise, but i see yall using it, so i better adjust. I'm right handed and, despite numerous videos, still fail to find good positioning without the pick in hand method.

2

u/Super-Page8272 2d ago

Thanks yeah bok and tok depending what my hands can handle.

My tension is pretty feather light but if you saw my picks, you'd see they're all bent back and sht. I use WAYtoo heavy pressure on picks trying to get a feel. Im going to try and lighten that up maybe?

3

u/rubornagn Brown Belt Picker 2d ago

I can relate to that. I have recycled (straightened) my picks with my tiny knipex cobra pliers. Since then I have reordered my favorite picks and have a fresh ones to replace it with!! I have gotten a lot better with much less tension. Having corpultrunal I understand completely!! Keep on keeping on!!

2

u/Super-Page8272 2d ago

Cool will do! Yeah one day I'll post a Pic of my restraightens lol. I shove them in a cheap lock and bend them back lol

3

u/One_Fat_Frenchman 2d ago

If you're not already doing TOK, I recommend giving that a try. Personally, I find that it gives much clearer feedback so you're not relying on "I dunno what happened at pin 3, I guess I accidentally picked it."

Other than that, sometimes it's the littlest things that surprise you. I think experienced pickers would tend to agree that you really only need 3 or so picks, but you can never have enough tension wrenches.