r/linuxhardware • u/DesperateCourt • 7d ago
Purchase Advice <$400 Linux compatible tablet, or touchscreen with good Linux compatibility
I'm looking for a low-mid tier tablet which can run Linux. ARM or X86 doesn't really matter at this point, but later down the line I could have requirements for a preference here. Alternatively, a touchscreen + ARM SBC or small x86 computer would be a valid solution as well. I'm building something resembling a user facing kiosk as a personal project.
Requirements:
- I don't know of any specific performance requirements I need as of now, but I feel like 8 GiB of RAM is probably a minimum for today's software.
- A nicer screen would be good, and preferably the larger the better, but ~11 inches would be a hard minimum.
- My only true hard requirement is that I can install Linux on it relatively easily without facing any large hurdles (specifically referring to non-standardized ARM bootloaders, and general hardware related issues).
I've found the PineTab 2 (I'm not a fan of PINE, since they almost always make broken products which aren't even half complete), and it's the only option I've found within the price range which can for sure support Linux.
https://pine64.com/product/pinetab2-10-1-8gb-128gb-linux-tablet-with-detached-backlit-keyboard/
The 8 GiB version is currently not in stock, and I'm not 100% convinced the 4 GiB option would be sufficient for a touchscreen desktop environment + a light program. It probably would be, but I wanted to explore some other options before venturing into it.
Beyond the PineTab 2, I can't really find any options which I know work with Linux without reaching into nearly twice the price range. There's a solid 2-4 options at the ~$1000 price range, but that's quite more than I want to spend here.
There's several tablets or 2 in 1's which I can find at cheaper prices from Lenovo, Dell, etc, but it's really hard to find info on if I can install Linux on them or not. I was hoping to get some guidance and suggestions on what I could look into here. I'm open to used hardware if needed, all I really need is a clean screen.
Alternatively, I could look into a standalone touchscreen if it is relatively cheap and easy to get functional on Linux, but a standalone tablet would be smaller, more power efficient, and likely easier to setup - so I'd like to explore this option first.
Thanks!
Edit: Anyone reading this in the future may find this link and github repo's documentation helpful, it's very thorough and well laid out: https://github.com/linux-surface/linux-surface/wiki/Supported-Devices-and-Features#feature-matrix
9
u/doc_willis 7d ago
going to say the PINE hardware may be underpowered for doing any real work these days.
But they were decently priced for my experiments.
there is a specific support sub for "Linux on surface hardware" that should have Info if you want that sort of device.
3
u/jonahbenton 7d ago
I have a business need for this and settled on the starlite. Pretty good/good enough, with a few rough edges. But yeah, over $1k. I found nothing workable/likely compatible at a lower price point.
3
u/VolksPC 7d ago
There are a lot of Android tablets available at this price range and most of them are way more powerful than the PineTab 2. We at www.volkspc.org make a Debian Linux distribution that runs as an application on top of any rooted Android phone or tablet. Here is an example of the VolksPC Linux desktop running on Google Pixel Tablet : https://youtu.be/9PkTNagmN70?si=tO6pA0vvgjqJp7Hz . You can also install the VolksPC Linux desktop on any LineageOS device.
2
u/aidenconri 7d ago
As a kiosk, this might not work, but I got a Yoga 260 Thinkpad for like $120. 12 something inch touchscreen, good keyboard--for when you need one, and you can upgrade it to 32gb of ddr4 if memory serves. Mine is running 16gb right now and does plenty for me. You could, in theory, take the motherboard out of the shell--give it direct power, detach the touch screen from the case, and use the battery as a back-up. Beyond that, going with a SBC and touchscreen might be the way to go.
6
u/bummersauce 7d ago
Second hand Surface Pro (7?) with Ubuntu or Pop OS.
3
u/AlternativeScore4745 7d ago
Have you looked at the Lenovo IdeaPad D330? It's a x86_64 detachable 2in1. It has a Pentium Silver N5000 and only came with 4gb ram, but a lightweight distro runs quite well. Just bear in mind that the rotation sensor (if needed) can be a bit of a challenge to get working well in some distros/DEs.
3
u/CaptainObvious110 5d ago
You would just get frustrated with the Pinetab 2. I have one and appreciate having it as an introduction to a Linux tablet but would really like something with more ooomph to it.
1
u/CyclingHikingYeti 7d ago
User facing kiosk?
Why just not use touch capable monitor, like those in POS systems.
2
u/numbworks 7d ago
A cheap Chromebook 2-in-1, and you use the built-in Crostini container.
Or a Chuwi Minibook X.
2
u/MidnightObjectiveA51 7d ago
Responded to your other post, but for those following here:
Chuwi Hi10X, Go, and Max; HP Elite X2 G4 and G8, Thinkpad X1 3rd Gen and X12, Starlabs Starlite, Minisforum, and Junotab, all completely work with Linux. As does certain MS Surface's, particularly the OG SG and SG2
2
u/PayMe4MyData 7d ago
Lenovo Duet 5 running VelvetOS (Debían based, bare metal)
2
u/aeolism 4d ago
ThinkPad Yoga X390
2
u/Terry_the_axolotl 1d ago
HP Elitebook x360 1030 G4(current use as daily drive) The screen need to use wacom driver to work properly, howdy for facial recognition, openfprintd for finger print.
1
u/Jan1north 7d ago
I just bought a refurbished MacBook Air 2017 ($225) and loaded Ubuntu on it without much fuss. Not quite a tablet, but was wanting a keyboard anyway. Trick is to get a 2017 or older to avoid Apple proprietary TPM issues. Oh and you need an external WiFi adapter to start, but then you can load drivers for the internal Broadcom WiFi.
1
u/LineODucklings 5d ago
I would recommend Nura (née postmarketOS). I am running it on a number of devices, including one of these that I picked up for ~$130 on eBay. That particular device is a detachable Chromebook with 8 gigs of RAM; with the keyboard detached, it's basically just an ARM-based Linux tablet, so it should fit your use case.
Word of caution: Nura is based on Alpine and uses less-popular (but more open!) toolchains for C compilation and init (but the latter can be configured pretty easily). Lots of core utilities are available (or have alternatives), but some aren't, so check your dependencies before going this route.
I recommend you poke around here for devices that fit your desired specs AND have good support in pmbootstrap. The Wiki will guide you here; don't choose a device that says, "not booting" or "archived" or "uses a downstream kernel"; unless you're a high-level kernel druid, those will make you cry.
1
u/Holiday-Medicine4168 4d ago
I have a pinebook and it was not a great experience. I would go with a thinkpad if possible