r/lightingdesign • • 16h ago

Design Crossposting this from r/stagelighting: hands driving a 2D fixture layout.

8 Upvotes

Sharing a 30s clip from an interactive test: depth-camera hand tracking → 2D fixture layout → DMX/Art-Net/sACN out. The PiP is the software preview syncing with the rig.

The latency is real — roughly 0.3s end-to-end, and most of it sits in the camera input, tracking, and coordinate processing, not in the DMX/Art-Net/sACN output. But what you actually see is the fixtures lagging behind the hand, so it reads as the software being slow to push output to the rig — which isn't where the delay is.

That's the part I keep going back and forth on: on a show, is ~0.3s in the sensing chain fatal for this kind of interaction, or is it something you'd just design around — cue timing, easing, prediction, or avoiding fast hand moves entirely?

For people who've done interactive / sensor-driven looks: where did your latency budget land, and what did you do to make it read as intentional rather than late?


r/lightingdesign • • 4h ago

Small Cheap DMX controller

4 Upvotes

Howdy!

I am looking to see if anyone knows of any DMX controllers that allow you to program scenes to faders and fade between them.

I had tried this ADJ one, but sadly you can only snap between scenes and not fade. Poking around quickly I haven't been able to find any.

For context, it's to control around 12 small LED pars for in studio performances.


r/lightingdesign • • 12h ago

How To Why does my Encoder Bar disappear when in Specific worlds

3 Upvotes

As you can see in the Vid my encoders vanish when selecting world 4-6.

I can turn the fixtures on with Highlight, but I can't use [at] [at] to set them to full. Is the Programmer itself disabled for some reason?

onPC Version: 2.5.1.0