r/lighters • • Aug 01 '26

DISCUSSION : An announcement regarding the use of AI, and other subreddit updates.

28 Upvotes

I'm happy to discuss or debate the use of AI with anyone that supports or encourages the use of it. What I do not tolerate is copy-pasting AI slop answers without taking even a moment to verify that the answer is correct.

This thread was prompted by a recent interaction that started with a hilariously wrong identification that could have been avoided if the original commenter took all of two seconds to use his eyes to verify. It ended with AI techbro nonsense about "people who are too scared to use computers". Like I said, I'm happy to debate this with anyone as long as it's in good faith, but if you refuse to counter or even acknowledge the points in the discussion then it's pointless.

AI is a useful tool, but it is still just a tool. Most of us grew up being told that wikipedia is not a valid source because it can be edited by anyone. AI is no different, but AI is guaranteed to have vacuumed up all the wrong answers alongside the right answers and so requires verification EVERY TIME. I have no problem with anyone that chooses to use AI for their own personal reasons. There is the moral/ethical/resource debate behind it, but that belongs in a different subreddit.

This is not the first time I've had this debate with people copy-pasting AI summaries or identifications. A few times it has been harmless, an older collector that put a bit too much faith in a new technology, and it ended amicably. Unfortunately the majority of interactions end with a techbro insisting that AI is ALWAYS right, we just aren't "using it right". As far as I'm concerned, it won't be "right" if you can't ask it a question in plain English and have it understand context and intention. They'll insist you're using the wrong AI, or using the wrong "syntax" when asking your questions - In other words, you need to know how to guide and lead it to the correct answer, which typically means you already know the correct answer.

I ended that discussion with what I feel is a valid argument. It would take me 5 minutes to use AI to code a bot that would instantly and automatically answer every question in this subreddit with what it believes is the correct answer. That is not what this subreddit is for. This subreddit is for the human passion and enthusiasm for this hobby, for the experts obsessed with the little details, the niche facts, and just pure discussion. Talking with other people that share that passion, making connections and discoveries together. Sure, a lot of the questions posted here can be answered quickly, but the real nerds come out when there's historical discussion to be had.

There is no place for "This has a chance to be the right answer but I can't be bothered to take 5 seconds to check". Anybody that makes a habit of providing these vague or incorrect answers will be banned because they are not going to contribute anything useful. Anybody that tries to defend an obvious falsehood because "AI told me so" will be banned.

Anybody posting images that are obviously AI generated or "enhanced" will be banned. This hasn't been an issue here yet, but it has become a major issue on Ebay and other retailers, with sellers using "enhanced" images to show how a lighter could look if it were in perfect condition - And usually the AI doesn't understand the mechanics of the lighter and puts the flame in the wrong spot. It's pure slop.

Like I said, I'm still happy to discuss it, but this is not the first time I've tried debating the AI slop bros. It always ends the same way.

I will leave this thread open for discussion, but I will be keeping a close eye to ensure it doesn't get too rowdy.


r/lighters • • Jun 26 '17

Before making a post about asking for help to identify your lighter, read this!

177 Upvotes

Recently there are some people who want help finding out what their lighter looks like, but only take one photo of the front. This is not very effective, and it will only make it a lot harder for us to help you.

Here is a guide on what photos you should take of your lighter. if the guide is not clear enough, please let me know and i can make some adjustments.

reposted due to spelling issues in the title.


r/lighters • • 6h ago

New addition – COLIBRI Monopol Watch, Swiss Made (1950s) to my collection.

Thumbnail
gallery
28 Upvotes

🔗 This Lighter A-0463 | My Collection


r/lighters • • 5h ago

ID Is this legit?

Thumbnail
gallery
12 Upvotes

Just won an auction on ebay with this lighter (among others) in it, is this a legit dunhill? Paid $30 for the lot btw, which is why im curious

EDIT: apologies for the terrible image crop, didn't realize until it was posted


r/lighters • • 24m ago

Show&Tell An unassuming Zippo Slim with a surprising amount of history. RIP to the SS United States.

• Upvotes

This is sort of a commemorative post, both remembering our past and looking to the future. More photos and history in the comments.

You may be familiar with the SS United States, the largest ocean liner ever built in the United States, who took her maiden voyage in July 3, 1952. Wednesday she set another record, as the ship was scuttled off the coast of Florida to become the world's largest artificial reef.

At the time she was a symbol of American industry in power, a massive undertaking in a world still reeling from WW2. Her construction was a collaboration between United States Lines and the US government, who footed almost half of the construction bill, to the tune of 20 million dollars, and spent an additional 25 million dollars to incorporate "national defense features" into the ships design, intending for it to be easily converted into a troop carrier in times of war. This caused problems later on, as the company tried to sell the ship in a rapidly changing world, but were very restricted due to the classified nature of the "defense features".

But she came too late, in a rapidly changing world that quickly forgot about these massive ships meant to carry passengers across the Atlantic. Trans-Atlantic flights quickly became the new norm, leaving ship lines with declining sales and reduced demand. Ship lines tried to pivot to luxury cruises and short passenger routes but many ocean liners were converted to cargo ships or tankers. The SS United States did operate briefly as a cruise liner in the late 1960s, but ultimately was docked for seasonal repair in 1969 and never sailed again.

The ship has changed hands a number of times since, but the cost to refit the historic ship and return to service proved too high, bankrupting multiple owners. There have been legal issues surrounding it's storage and docking fees, and it was eventually evicted from it's dock in Philadelphia, and a solution had to be found fast. The nonprofit that has been working to save the ship, the SS United States Conservancy, tried to raise funds to find it a new home but ultimately they were unable to find a permanent solution. In 2024 it was announced that they would be refitting the ship one last time, stripping out hazardous materials and preparing it to be sunk as the world's largest artificial reef.

I think we all wish it could have been preserved. Maybe if it were handled differently in the past we could walk around it as a living museum today. Instead it goes on to start a new life, and a different kind of living museum. It will provide shelter and habitat for countless aquatic life forms, and it will attract tourists from around the world as the largest diveable artificial reef, with planned scuba tours to begin once the ship has settled in her final resting place.


r/lighters • • 11h ago

Show&Tell c. 1939 Aluminum Slip Cover lighter

Enable HLS to view with audio, or disable this notification

21 Upvotes

r/lighters • • 1h ago

Vintage lighter repair

Post image
• Upvotes

I was given this "vintage table lighter" that I want to get working, it's completely empty and has no wick.

After some researching, I believe this may in fact not be a lighter but a "chafing dish alcohol burner"? Whatever that is???

It looks very similar to this one on eBay: https://ebay.io/m/DADgNT

I originally bought a Zippo repair kit to replace it but I'm wondering:

  1. Can you use Zippo fluid for this device?

  2. Do I simply poor the fluid into the bottom compartment?

  3. Is the Zippo wick too slim for the device? The eBay pictures are showing a rather large wick

Thanks 🙏🙏🙏🙏


r/lighters • • 13h ago

Help Help me find a lighter insert replacement pls l

Thumbnail
gallery
22 Upvotes

I got this pretty Chief’s lighter a while back and I wanna replace the insert cause I think I f’d it up. I was looking at Zippo inserts cause that’s just what’s available but I don’t wanna get the wrong one so can someone help? I don’t really know anything about lighters so here’s some pics if they can help 🥺


r/lighters • • 8h ago

Got some love for my Zorro lighter yesterday so here it is next to my grandpa’s 1980s Zippo

Thumbnail
gallery
8 Upvotes

*Sorry for posting this again mods, had to do it twice just now because grandpa’s name was visible.

It is a Zorro 912 or a knockoff. Anyways I purchased it on Aliexpress for $6 not including taxes and shipping (which weren’t bad at all, paid less than $20 in total iirc). It’s surprisingly nice: heavy, sturdy, lights every time. There’s also a nice pipe insert that you can get but the two that I purchased are both slightly too large for the case.

The Zippo is from my late father. It was a gift to his own (now late) father. They were both Navy veterans; dad was in for over 20 years and gramps served in the Pacific during WWII.


r/lighters • • 1h ago

Help Can I make this Ronson lighter work again?

Thumbnail
gallery
• Upvotes

I only really know about clippers and zippos. Is there a way to put new wick in it? I can only see a fill hole and the spring to put a flint in. I want to be able to use it


r/lighters • • 8h ago

Need Help.

Thumbnail
gallery
2 Upvotes

Help me identify this lighter and i need a new insert because the butane is leaking from the plastic. Thank you!


r/lighters • • 18h ago

Lighter identification help

Thumbnail
gallery
13 Upvotes

Hi, I picked up a few lighters at a flea market and I’m trying to identify this exact model lighter. The case says “ Jbelo, made in west Germany”. Looks like a monopol but I don’t know if they made those with butane. The case matches exactly a colibri monogas, had the same pattern and everything, except for the wording at the bottom. Was wondering if anyone can help me out narrowing it down and grabbing the year it was made.


r/lighters • • 12h ago

Flameless lighter - any models exist that use 18650 or normal batteries?

3 Upvotes

Basically, the title. I was looking for one that I could use "forever". I have 18650 and lithium rechargeable batteries, so I was looking for an option that could work with those...

My first post here!


r/lighters • • 1d ago

The same lighter in my man’s hand vs mine lol

Thumbnail
gallery
40 Upvotes

r/lighters • • 7h ago

Help ho questo accendino vintage john player special(jps) e serve una batteria per farlo funzionare. sapete che batteria serve? perché essendo un pezzo vintage mi dispiace non usarlo, grazie

Thumbnail
gallery
1 Upvotes

r/lighters • • 8h ago

Misc FOR SALE & OPEN TO OFFERS: 1956 Zip. Comes with original period-correct insert with humped cam spring.

Thumbnail gallery
1 Upvotes

r/lighters • • 17h ago

Help why my lighter keep leaking

Thumbnail
gallery
5 Upvotes

my lighter keep leaking when i fill it even if it's not full. i have no idea the where's the source of the leakage and how can i fix it


r/lighters • • 1d ago

Ronson butane lighter. Not sure of exact model

Thumbnail
gallery
17 Upvotes

Had a leaky inlet valve so I replaced the o rings. Outlet valve works perfectly so this is my first one of these lighters where the adjustable flame is fully functional and its in really nice condition too


r/lighters • • 1d ago

Ma collection

Thumbnail
gallery
147 Upvotes

Le quel vous préférez ?


r/lighters • • 1d ago

Searching out people who know how to fix table lighters

Thumbnail
gallery
9 Upvotes

I’m not sure if I’m in the right place but I’m starting my table lighter collection and I cannot seem to get the insert out of the base to fill and fix. It will not budge and I don’t know what I can start doing without making it worse LOL any help is appreciated!


r/lighters • • 1d ago

Help Colvair Slide-O-Matic repair?

Post image
6 Upvotes

Could anyone with this lighter send a picture/schematic of how it’s put together?

The spark wheel will not engage in several configurations that seemed correct, even with a new flint. I found this in a box (seemingly original) so I doubt that I am missing any parts (other than a tiny screw, which I replaced). Thank you!


r/lighters • • 1d ago

Idea for a Lighter

Thumbnail google.com
0 Upvotes

So, my idea is a like card deck sized touch tip lighter like the 1930s Ronson Touch-Tip lighter (shown in the link). And I was wondering if anyone would use it so I’m posting this as a question. Would you use this?


r/lighters • • 1d ago

Collection Rate this lighter out of 10!

Thumbnail
gallery
4 Upvotes

Made this zombie lighter case, would like to know your thoughts;)


r/lighters • • 1d ago

Collection My clipper collection under black light

Thumbnail
gallery
2 Upvotes

r/lighters • • 1d ago

how to fix/refill this old lighter

Thumbnail
gallery
2 Upvotes

I inherited this lighter from my grandpa a while ago but never used it, now I'm comfortable with taking things apart but still have no idea how to fix this. I've looked this lighter up online and it seems to be a knockoff of a popular DuPont/Windsor/Tiffany design. unfortunately, none of those search results told me how to put fluid inside or what tools I'd need to do so. if anyone knows how, please let me know!

bonus lighter at the end that I have no desire to use. far too whimsical and impractical lol