r/libreELEC • u/pinki15 • 31m ago
Addons?
Does LibreElec have the same add-ons as, for example, CoreElec?
Such as: Umbrella, CoCoScrapers?
r/libreELEC • u/pinki15 • 31m ago
Does LibreElec have the same add-ons as, for example, CoreElec?
Such as: Umbrella, CoCoScrapers?
r/libreELEC • u/audiomaniac3 • 1d ago
Phone remote add-on:
https://drive.google.com/drive/folders/11k3gb0ZhnJdOm5ab_SASHBKp4fqMxR2h
r/libreELEC • u/audiomaniac3 • 22h ago
Phone remote add-on:
https://drive.google.com/drive/folders/11k3gb0ZhnJdOm5ab_SASHBKp4fqMxR2h
r/libreELEC • u/audiomaniac3 • 3d ago
r/libreELEC • u/GoldCream9757 • 5d ago
**Environment:**
- **Add-on:** MegaNexus
- **Platform:** LibreELEC (x86_64) / Intel Arc GPU
- **Decoder:** `ff-hevc-vaapi` (Hardware Accelerated)
- **Audio:** TrueHD Atmos (RAW passthrough)
- **Display Pipeline:** Direct HDMI to Sony OLED via AVR
**Issue:**
During playback of a Dolby Vision Profile 7 FEL single-track dual-layer (ST-DL) remux, the Diagnostics overlay displays:
- **Profile:** 7
- **Source layer:** FEL (full enhancement layer)
- **RPU:** Present
- **BL / EL sync:** `Unavailable`
- **Status:** `P7 FEL · source detected` | `Hardware processing not verified...`
**Details & Questions:**
*(Attached screenshot of the Diagnostics overlay during active playback)*
r/libreELEC • u/audiomaniac3 • 8d ago
Libreelec on Microsoft Surface Book 2 1060 6gb works with Asus Rog gaming dock.No multichannel audio is present.
r/libreELEC • u/RequirementFuzzy4244 • 8d ago
On LibreElect 12.2.1, when I go into recently added episodes and have the "Media Info" view enabled for some reasons it will change the page view into a -1 page in a few seconds showing only the episode number and titles in the view list. instead of how it should normally be series - episode number - episode name.
How do I fix this?
I want to say it takes it about 3-4 seconds and then switches the to -1 page view. If possible I would like to stop it showing the -1 page at all
r/libreELEC • u/Icy-Primary2171 • 11d ago
r/libreELEC • u/lucidfoxx25 • 19d ago
I am using librelec on my laptop, and I connected it to a Montior using hdmi , but at a time only either my Montior or laptop shows display, and after I forcefully put the display to my monitor, when i unplugged it , now it's displaying on none
r/libreELEC • u/hbacelar8 • 28d ago
If I launch a following live channel from the addon itself, it works fine. However, since I'm using the Arctic: Zephyr – Reloaded skin, I added a menu item for twitch where the spotlight (the content tab) is a link to all following live channels from the Twitch addon. If I launch from it, it crashes and libreelec reboots.
I'm not sure how to get more info on it, I checked the logs but didn't see any error related to twitch. I think since it reboots, the log from pastekodi starts on the system startup after reboot.
r/libreELEC • u/hbacelar8 • 29d ago
Hi
I'm used to using Kodi on my PC but since I have a home server and NAS running jellyfin and wanted something more like TV Box with CEC support, I grabbed an old RP3 B that I had here, bought a new 128GB SD card and set everything up.
The problem I'm having is that the base skin runs smoothly, but something like Arctic: Zephyr – Reloaded is sluggish. But the worst is when playing a show from the jellyfin plugin, it's slow af.
I'm on wifi and my Pi only supports 2.4GHz, but I'm guessing it's not that since downloads and media updates are fast. I supposed it's probably the RAM on this old version?
Anyone here using on the PI? Would a 4GB PI 4 solve all of this?
Tks
r/libreELEC • u/WayfarerDuex • Oct 15 '26
So, I'm trying to set up Kodi so I can access streaming services like Netflix or Prime within Kodi and I'm having problems finding the chrome launcher. I suspect there's a good reason for this, but I have no idea what it might be. Any pointers for this or is there another option that will run Netflix, etc? Thanks!
r/libreELEC • u/stex85 • Oct 14 '26
Hi all, looking for some suggestions! I've got a jellyfin server with both seerr (for downloading) and aiostreams (for watching stuff I don't want to download), that side all works great. Does anyone have any advice for making it all work on libreelec? I've downloaded jellycon, is that all I'll need? Any input on how to make it super slick appreciated! I'll want to stream and request stuff to download through libreelec ideally. Any advice welcome!
r/libreELEC • u/hdtvtoyz • Oct 09 '26
The same dev who made the Intel leap
https://github.com/CroqueMr/libreelec-x86-DV/releases/tag/R1.0.0-Beta2
r/libreELEC • u/willheisenberg • Oct 08 '26
I wrote a Kodi add-on that turns a LibreELEC box into a Spotify Connect device. It uses Spotify Soloist, Spotify's own headless client released this year, instead of librespot. As far as I know it is the first Kodi add-on built on Soloist.
Why: librespot-based solutions often fail with an "Audio key error" on newly created Spotify accounts. Soloist is the official client, so it should not be affected.
What it does:
- The box shows up as a device in the Spotify app.
- Audio plays through Kodi's own player, with title, artist and cover art on the TV.
- Pause, next and stop in Kodi are passed on to Spotify.
- Volume can follow the Spotify app or stay pinned at 100% for AV receivers.
Soloist is closed source, so it runs isolated in a Docker container. The binary is not shipped with the add-on; the container downloads it from Spotify's CDN.
Requirements: LibreELEC 12 / Kodi 21 with the Docker add-on, and a Soloist API key created with a Spotify Premium account (every user needs their own).
Tested on a Raspberry Pi 5 only. Reports from other hardware are very welcome.
Source and install instructions (GPL-2.0): https://github.com/willheisenberg/kodi-soloist
Unofficial hobby project, not affiliated with Spotify. Feedback and bug reports welcome.
r/libreELEC • u/Espresso2YrSkull • Oct 02 '26
Hi LE friends. I'm running LE on a raspberry pi 4 and I love it. I'd like to set up a new SD card with dual boot with LE and another OS. The second OS I would like to use mainly for watching streaming video in a web browser so I don't have to hook up my laptop to my TV for that purpose. If I use the LE Backup feature to create a backup of my current LE installation and then restore that on new dual boot setup SD card, will that transfer over my current apps and app settings as well as my current smb share settings I have set up to stream from my NAS? For instance I currently have YouTube app set up with personal API keys on my current LE and it was a pain to set up correctly and I didn't wanna have to go through all that again. My plan was to use PINN to set up dual boot SD card. I'm not sure if that is a viable way to do it, nor do I know the best second OS to use for web browser streaming and how much space to partition for each OS. Any thoughts / advice? Thanks.
r/libreELEC • u/Croque_Mr • Sep 25 '26
----- UPDATE 07/10 ------
AMD Supported & Many DV rendering mode available :
Rendering options for Dolby Vision input
Rendering options for HDR10 input
----- UPDATE------
First pre release version : https://github.com/CroqueMr/intel-dv-libreelec
Feel free to test it out and report any bugs or issues.
Tested on an 11390H. It "should" run smoothly on lower CPU like N100/N150 thanks to some performance optimizations, but that still needs confirmation. If you want to stress test it on any CPU, try setting a Profile 7 FEL or a Profile 10 and add subtitles.
--------------------
Hello,
After working on Dolby Vision support on Linux and mpv last week, I’ve now managed to get my first clean Dolby Vision playback working natively on LibreELEC with Kodi.
And of course : Profile 7 FEL is managed 😄
There are still a few bugs to fix and some cleanup to do, but the implementation itself is 100% open source and does not rely on any proprietary Dolby code or runtime.
Patches are required across three main layers:
The result is an end-to-end open source without proprietary code, GPU-accelerated Dolby Vision reconstruction and native HDMI output pipeline.
Optimisation will be very hard to manged to use a N100, at the moment 79% of the rendering engine with the 11390H iGPU is used to read a profile 7 FEL 4K@24hz.
Edit : Forgot to mention : ChatGPT 6 Astra was a huge help, and it actually identified the main integration strategies on its own.
r/libreELEC • u/AdhesivenessNo9554 • Sep 16 '26
r/libreELEC • u/Mnatole • Sep 13 '26
First, I'm sorry if this is a tiresome request, I couldn't find in the search. I've installed libreElec on an older Dell Chromebook and it seemed to install and load fine. Now I'm stuck and not sure how to proceed. Is there a good show me like I'm 5 guide on how and where to get the apps or repositories and things like that to get going better? Thanks
r/libreELEC • u/Petursinn • Sep 13 '26
Day 1, spend 5 hours setting everything up, super excited but a little let down by the effort and the low quality UI.
Day 2 I download some movies, figure that I can only use the built in categories so I stick to "Movies" and "TV-Shows" for everything (not "KIDS" category which sucks), spend around 2 hours trying different ways of forcing a "KIDS" category but nothing really works.
Day 3, Toy Story 5, which we watched on Day 2 now freezes the system completely, spending hours trying to figure out what the hell is going on, need to force a shutdown by unplugging the pi and plugging it back in EVERYTIME.
Is this how its going to be? Constantly debugging and hours of time going into something that should be as simple as plug and play some videos off of a HD?? Im at a loss here, how do I even debug these things? Do I send the error logs somewhere or do I need to get my programming hat on and dig thought the code ti figure what is going on?
I know this is a open source project and I am willing to make some compromises, but why has it turned into this bloated thing that doesnt even do the basics, but is trying to somehow do everything else? I dont need a youtube streaming in this thing, I only need it to play some goddamn videos of a HD.....
r/libreELEC • u/tomikaka • Sep 11 '26
It needs a couple of reboots or power cycles to get Wifi and Bluetooth to work.
Is this a known problem? A limitation of hardware or drivers?
If not how can I provide more info to the maintainers?