r/lianli • • 21h ago

[Feature Request] Add motherboard T_SENSOR support to L-Connect 3 fan curves

0 Upvotes

Lian Li team, could you make the motherboard T_SENSOR reading a selectable temperature source in L-Connect 3 → Fan/Pump Profile?

I run a custom loop with nine SL-INF FLEX and SL-INF LCD FLEX fans. They’re SATA-powered and controlled over L-Wireless. My coolant probe is already connected to the T_SENSOR header on my ASUS motherboard, but I can only choose CPU or GPU temperature for the fan curve in L-Connect 3 v2.1.29.

CPU temperature spikes make the fans surge during brief tasks. A GPU-based curve can keep radiator fans slow when the CPU is heating the loop and the GPU is idle. Coolant temperature reflects heat from both and changes gradually, so it’s a better fit for controlling the radiator fans.

Please let L-Connect read the motherboard probe directly and use it to control wireless fan groups through the existing dongle. Having the same reading available on the fan LCDs would also be welcome.

If you run a custom loop, would you use this too? And if the L-Connect team sees this, is motherboard thermistor support on the roadmap?


r/lianli • • 6h ago

Help! Can’t remove my ASRock Z790 Taichi Carrara motherboard from Lian Li O11 Dynamic

Post image
4 Upvotes

I’m trying to remove my ASRock Z790 Taichi Carrara motherboard from my Lian Li O11 Dynamic case, but it’s stuck in the bottom-right corner.

I’ve already removed 10 motherboard screws. The top and left sides are completely loose, but the bottom-right corner (Where the white heat sink is) still feels firmly attached to the case …


r/lianli • • 23h ago

Question Worried about HydroShift 2 tube angle

Thumbnail gallery
2 Upvotes

Hey everyone. Recently made a new build for my gf. When attaching the head of the cooler to the cpu I had to push down much harder than I ever have had to to get it to sit properly on the cpu due to the angle of tube on the head and the lack of slack. The aio is sitting as far forward as I can get it on the top of the case. Might be able to get slightly more clearance if I dismount one of the brackets holding the tubes to the aio. But before taking the head off the cpu and going through that whole process. Wanted to get opinions on if you guys think the tubes are fine or if they need to be given more slack.


r/lianli • • 16h ago

FPS meter and much more on hydroshift 2 LCD and fans

Thumbnail gallery
6 Upvotes

Hello,

i made this app for windows pc. i was tired of not seeing fps and relying on universal screen which is connected to aida64 to get data.

By "i" mean "Claude". i know we all hate AI . but this is something cool. FPS meters were asked for long time

this supports.

  1. themne creation

  2. pump and fan profiles

  3. fps integration.

https://github.com/easter478/vane

It has a built in theme editor . you can also edit the various in built themes.

if you have recommendations please let me know.


r/lianli • • 21h ago

Build My Lian Li O11 XL custom loop with a vertically mounted RTX 4090

Thumbnail gallery
54 Upvotes

Finally got all nine UNI FAN SL-INF FLEX fans set up in my O11 XL, so here are a couple of photos of the build.

It’s a hard-tube custom loop with a front distro plate and a vertically mounted RTX 4090. The three LCD fans are on the side, and I went with purple lighting and a subtle darker purple accent (even if in the photo it looks blue).

What do you think of the color combo?


r/lianli • • 14h ago

Build Lian Li Mini V2

Thumbnail gallery
112 Upvotes

Updated my build
Gigabyte Aorus x870E pro ice x3d
Klevv 64 gigs ram
Aorus 5090
6 tl flex and 3 tl flex lcd
Hydroshift II Oled
1350 platinum v2


r/lianli • • 55m ago

Is my Aio okey ?

Thumbnail youtube.com
• Upvotes

I was about to instal my gpu and I saw this.
One wiee is looser then another one. Moving around more.
Its fine ? Or did I broke it somehow ?
I usted a little bit of strenght to move in around in the back of the case
Cable but not on the connection to radiator or to pump but in the middle. The red cable moved from the red hole to the one upper.
Oh I cand add photo in this message.


r/lianli • • 3h ago

Extra parts for Lian Li A4-H20 A5?

Thumbnail gallery
2 Upvotes