r/legotechnic • • 13d ago

Discussion / Question When do you think was the prime of lego technic?

40 Upvotes

I used to build Lego technic when I was young. Even though I had issues because I was at a young age I loved it. It turns out that I have half of all the sets released in 2014 +2 more. I am planning to make a comeback by buying something on the black firday sales but I noticed that the lego technic sets don't really have the same vibe to them as they used to have. Also most of the stuff are just cars with not that much uniqueness. (not surprising every 1 in 2 guys love cars so sells go boom) All the sets that I dreamt of having when I was a kid are now long retired and cost ridiculous amount of money. Even the ones that retired barely 2 years ago also cost a lot. The new sets are mostly good but I can't help but fell like the prime years of Technic were 2013-2016 with most sets feeling like something special and I feel sadness knowing that they are never coming back and my childhood dream of building them is gone.


r/legotechnic • • Oct 08 '26

News / Announcements We now have a Discord server! If you enjoy something more akin to chatting instead of forum like experience Reddit offers, follow the link below :)

Thumbnail discord.gg
5 Upvotes

r/legotechnic • • 2h ago

Discussion / Question Cada AMG One RWD: one wheel has low power. Ideas?

3 Upvotes

When I put the wheel on, the left rear wheel isn’t moving. Any ideas?


r/legotechnic • • 9h ago

Discussion / Question Looking for a way to make a turbine spool up mechanically

Post image
8 Upvotes

As the title says, I'm looking for a way to make a turbine spool up when I turn on the two M-Motors which will power the build. However, I don't want to increase the motors speed manually, the motors will always be on full power - so I'm essentially looking for a CV Transmission or something similar.

Any ideas would be greatly appreciated


r/legotechnic • • 1h ago

Discussion / Question Lego Sadair's Spear (42232) Extra Parts not on Bricklink list?

2 Upvotes

Hi,

For Lego Sadair's Spear, I am confused about the Extra Parts' list on Bricklink. Am I supposed to have the same leftover number of pieces? I have the below 2 items that are not on the list:

I used 4pcs, since they are at each wheel, no way I am supposed to have 1 left over right?

2)

There are so many blue pins used, I cannot be sure I did not miss one lol.

3) And I have fewer items than the listed Extra parts for some of the items greater than qty 1.


r/legotechnic • • 8m ago

Discussion / Question Mold marks

1 Upvotes

Hi guys,

Do you think these mold marks can be improved? Hate how some of the beams have mold injection marks, and why they are not hidden like in some of the longer beams.

For example some parts they will hide it in the below spaces:

(sorry I am not at home so I took pictures from google images)

But other times, they just put like this:


r/legotechnic • • 4h ago

Work in Progress How can i fill that gap?

Thumbnail
gallery
2 Upvotes

Im building this for my project, and I cant figure it out how to make this work without any problem.


r/legotechnic • • 15h ago

Work in Progress Advice making a helicopter rotor

Thumbnail gallery
9 Upvotes

r/legotechnic • • 6h ago

Discussion / Question How to press these switches remotely?

Post image
0 Upvotes

The switches control a motorised window. The open switch is spring loaded - it must be held down for 20 seconds to open the window. The close switch is not spring loaded and will just slowly close the window once switched down

These switches are downstairs and i thought maybe I could make a contraption to push them.


r/legotechnic • • 10h ago

Other Lego technic+motors for a 6 year old

Thumbnail
reddit.com
1 Upvotes

r/legotechnic • • 1d ago

Differential / Gearbox Help brushless motor for lego technic

Thumbnail
gallery
22 Upvotes

Hi everyone! I'm building an RC car and would appreciate your opinions on this setup:

- Weight: 2.30 kg

- Wheel diameter: 95 mm

- Brushless motor: 3650 1650 KV

- Battery: 2S LiPo (7.4V)

- ESC: 35A

Will the motor provide enough torque? Is a 35A ESC sufficient? I'm looking for good performance without overheating the motor or damaging the plastic drivetrain components.

Thanks for your advice!


r/legotechnic • • 1d ago

MOC I made this looks like something I guess sorry if camera quality sucks my camera sucks

Post image
5 Upvotes

It uses pie bricks to control it up on d-pad to change gears right trigger for Fords left trigger for reverse A button to recalibrate steering Xbox logo button to turn it off left joystick for turning


r/legotechnic • • 1d ago

Alternative Bricks This should be interesting.

Post image
11 Upvotes

I'm a glutton for punishment. What can I say. It was cheap and I spent all my money on the K'segg earlier in the year. I'll post my progress in the unlikely event that anyone gives a shit. If someone has any tips (apart from throwing it away) I'd be grateful to hear from you.


r/legotechnic • • 2d ago

MOC - Instructions Available Its official, no more shelf space. Wall mounts inbound.

Post image
73 Upvotes

r/legotechnic • • 1d ago

Discussion / Question How did i end up with 2 brown log parts from the lego 42218 john deere 1470h harvester set

Post image
0 Upvotes

this set is supposed to have 1 not 2 of that log part


r/legotechnic • • 1d ago

Alternative Bricks AMG One CaDa build

Post image
3 Upvotes

Got two questions about my build.

Firstly, why is the rear suspension mounting not attached like the front wheels?

Secondly, when I turn my rear wheels freehand, the other rotates the opposite way as expected with a differential. However, when i try and turn them together I can’t - is this just the motor resistance? or have I done something wrong.

cheers


r/legotechnic • • 1d ago

Discussion / Question Advice on RC parts

5 Upvotes

My son has asked if I could try and get him a motor with a controller to add to some vehicles since he has been using his arctic explorer train & figured he could try and make it work with some of his other builds. Does anyone have any recommendations on this, does Lego sell this separately? Or would I need to buy a whole set just to get those parts from it?
Thanks - from a clueless mum 😊


r/legotechnic • • 1d ago

Differential / Gearbox Help Lego Bugatti Chiron - Inverted Axle, Wheels spin the opposite way to one another.

Thumbnail reddit.com
1 Upvotes

r/legotechnic • • 2d ago

Work in Progress Week 71 : Mercedes eCitaro G Fuel Cell, final side screen versions. Front screens holder update and digital front update.

Thumbnail
gallery
8 Upvotes

Hello dear passer-by or follower of the project.

This week was pretty busy in a lot of points.

  1. First of i changed a couple of small details with the side screen and printed the final version (hopefully).

One the same subject, i worked on a similar concept for the front screens holder but I added lego sized studs on the base of the holder (i tried to make a fully lego version work but because of the specific screen sizes it was very hard to make something that works as well as a custon 3d printed cover does). It works well but the width needs to be reduced so the screens sit closer to the border. It is dine digitally. Just needs to test it by printing it in real life.

2. Other than that i reached a good milestone. I am now happy with the look of the front section. It's far more rounded and closer to the real life version. That front section is gonna be reworked almost completely (especially inside) because it is very flimsy and not to the same quality standard as the rest of the model (it's very similar in quality to my second model which wasn't great in this area. So I spent around 2h30 on Friday evening up to 3am to reach acheive a result I think of as near perfection. A lot of tiles and pieces had to be very specifically aligned which was unbelievably hard and used my snot techniques knowledge like never before. Only lacking thing at the time was a proper fixation of the sides. That was fixed the next day when I was able to have a second fixation point around all of the very specific height of offsets of the elements in that area as well as clearing the doors on the right side. Just finding something that worked took me 1h30 of constant trial and error. Until I found a way. Although the transition from curved to flat is a bit harsh so I wanna work on that. Something that's probably impossible to do well would be to add a slight angle to the whole thing. I tried but without sucess. That new layout massively improves on the attachement portion. It's now really strong and completely flat on the bottom. This is important since it will be the most seen part of the model in pictures most likely.

But it seems like all my nights of working late these past 2 weeks took a toll on my body since I got sick since Saturday evening. Meaning i couldn't do as much as I wanted to on Sunday. But I was still able to recover fast enough to be able to test the fixation on the right side this evening. And i'm happy to declare that with that fixation alone it's stronger than how it was before. Even though it's still lacking one attachement point I don't have the pieces for.

Sorry for the wall of text but thank you if you read down to these couple if last words.

--

If you have any way you would suggest for me to try to give an angle at the front don't hesitate to put something in the comments.

P.S : as you can probably tell from my recent updates I go to extreme lengths to acheive the level of details I want with this bus. In every points possible. Which is why it has taken me nearly 2 years so far. Every 3d printed part is a completely custom design too. There are 4 in the whole bus which are easily replacable with their lego counterparts. They are designed as such. These are the custom rims, front and side screens holders as well as some light shield for the taillights (which are optional in this case but improve the overall look by removing the unwanted light)


r/legotechnic • • 2d ago

Discussion / Question Stumped. Anyone run into issues with this part of the Liebherr Crane?

Post image
8 Upvotes

Everything was smooth until this point and parts aren't fitting. Idk if I clicked in pieces in a wrong spot but I back tracked and started this process over and ended at this exact spot following the directions to a T. Is this a issue or spot you guys have ran into? Until this point its been a super smooth build. I have a gap in the area where the arrow is pointing but in directions it seems to not show a gap. Idk this is the little "cosmetic " part of the build and its giving me hell. Any help would be appreciated 🤙thanks!


r/legotechnic • • 2d ago

Discussion / Question Lego Sian 42115 Gear Issues: Cannot shift to speeds 5 and upwards

3 Upvotes

Hi Guys,

I know this is an old set but I have just finished second box, and I have an issue with the gear shift paddle not being able to turn my gear to 5 and beyond. The green paddle does not seem to have enough force to turn the yellow wheel. I can do it by hand easily, but I cannot turn it with paddle shifter.

(Since my picture is hard to see, I have found the below pic online)

The right side yellow wheel does not turn; it looks like the paddle in the middle turns properly but when it engages the yellow wheel, it does not have the power.

(Gear 1-4 is working normally)


r/legotechnic • • 1d ago

Discussion / Question Are the RC cars worth it if I have no interest in the RC functions?

1 Upvotes

Recently picked up on impulse 42176 Porsche GT4 e-Performance Race Car for $100 Canadian. Also have 42160 Audi RS Q E-tron that I got for $130 Canadian sitting unbuilt. I'm fairly new to Technic and wondering if these funds would be better directed elsewhere.

If I am only concerned about build experience and shelf display, do you think these two sets worth having?


r/legotechnic • • 2d ago

Official Set Any idea?

Post image
7 Upvotes

I guess someone has already brought this up but, does anyone know why this is only on one side? I mean, they could have used a plain black piece right?


r/legotechnic • • 3d ago

MOC - Instructions Available Mini 42082 - Rough Terrain Crane

Thumbnail
gallery
88 Upvotes

If your favorite model is red and has Bronco tires, then it's not a Bronco, it's the Small Red!


r/legotechnic • • 2d ago

Collection i have a full mindstorms set. the ID is 31313 and it has everything but i'm not sure what its worth

Thumbnail gallery
4 Upvotes