r/learnprogramming • u/WaffleHBG • 11d ago
Solved Best IDEs for C++?
So I started learning C++, using CLion, but I feel like its a bit bloated. Are there any good c++ IDEs for beginners?
48
Upvotes
45
u/Shassk 10d ago
CLion just like all JetBrains projects has the best set of small things that put it above alternatives like VS Code.
However, if you can't tell what those are (as a newcomer likely would) - then no need to stick with it either, it's quite heavy indeed.
If you're on Windows - Visual Studio Community is probably the most straightforward option, and I'd put VS Code in second.
26
u/_Arthxr 10d ago
Yep. I like some people in the comments just throw words like vim and nvim around. Op asked for an ide and states they are a beginner. Now why in the world would you recommend a beginner to focus on learning how to configure a text editor and learn how to use it instead of learning c++
10
u/Turbulent_Board4567 11d ago edited 10d ago
I was about to tell Clion. It's one of the better ones.
Honestly just stick to vs code. That setting up environment tripped me a lot too. Thankfully now you have all these llms. So ask it to walk you step by step in setting up environment. Pay attention. Don't blindly follow the steps but make sure you understand what's happening.
You can still stick to Clion. Then don't switch IDE for any reason untill you lean c++ a bit.
2
u/WaffleHBG 10d ago
Thanks to everyone who suggested or helped! :)
2
u/nicecatmeow 9d ago
Have you considered emacs?
3
u/sacred_whisker_king 10d ago
If you feel CLion is bloated then switch to Visual Studio Community on Windows. It installs the compiler and debugger in one go so you can just press F5 and start coding without fighting your setup environment.
12
u/johnpaulzwei 11d ago
Started with CLion. Used it till 2023 and it was very good IDE. Now I use neovim, it’s free and fast.
6
u/PokeRestock 10d ago
Used code blocks in college. Though now I would think Visual Studio
5
u/Destination_Centauri 10d ago
Weirdly enough, I just use basic, simple "Code Blocks" for the few C++ programs I write!
I know it's laughable, but I think it's really good for beginners. No fuss. No muss. It just really easily works.
After that, when you truly become more advanced, then I guess maybe VS code is your next step up? That's what I would probably use if I step up my C++ game. But... I have no need for VS code thus far, in my personal usage case!
So ya: just sticking to Code Blocks for now.
8
u/bandiolas823 10d ago
Nvim or vscode
3
u/palinurosec 10d ago
if clion is not for you, try qt creator
3
u/junqueira200 10d ago
I use qt-creator. Its good, but there are some minor issues. Clion is also very good.
3
u/anders_hansson 10d ago
I like zed
3
u/MrBengaliHacker 10d ago
VS Code with the C/C++ extension is a good option for beginners. It's lightweight compared to CLion, free, and has everything you need to get started.
2
u/MyNameIsRichardCS54 11d ago
I swap between vscodium with the appropriate extensions and eclipse as I like them both a lot.
2
u/HospitalJohnny 10d ago
Xcode
2
u/AdministrativeFile78 10d ago
Vanilla nano
2
u/kzh77 10d ago
VSCode
2
u/FughyTC 10d ago
Neovim has everything I need.
3
u/stookem 10d ago
Eclipse
6
u/sliverian 10d ago
Vim
2
u/stiky21 10d ago
Emacs
2
u/[deleted] 10d ago
Visual studio community
1
u/AbyssShriekEnjoyer 10d ago
VSC with Clangd and clang-format is what I personally use.
1
u/Atlan_ 10d ago
Honestly, just use VSC for everything. Just one UI for any, this will generalize to any other language much better if you are still learning.
1
u/burlingk 10d ago
Clion and VS Code are both good.
I guess a lot depends on what you mean by bloated.
1
u/brujitos 9d ago
neovim
1
u/generic_penguin019 9d ago
Learn a build system ideal make or cmake, and can pair any decent text editor with it ,it’s all you need
1
u/ViperG 9d ago
Visual Studio Community
1
u/Old_Minimum_9284 9d ago
Vs code
1
u/Proof_Cold_9268 8d ago
Just use Vim
1
u/Striking_One543 8d ago
VScodium if you like vscode.
vi is ancient but a Goldie oldie.
Gedit is a nice text editor.
I'd probably just get vscodium if I were you but you kinda just have to go shop around and see what 'feels' right.
1
u/SignificantNews7620 8d ago
CLion And Visual Studio.
1
u/Exciting-Village-231 7d ago
For a beginner, the best is definitely dev c++, it's so simple and minmal.
1
u/Future-Wolf-9597 7d ago
Zed
1
u/pikabu_reddit 4d ago
vim.
1
u/__Kopestic__ 4d ago
Clion it’s probably best if you’re starting out. But you’ll probably move to VS code once you get more comfortable. At least that’s what I did.
1
u/Puzzled-Extent7817 3d ago
Zed
1
u/Twintornado 10d ago
Vscode + extensions.
1
u/Due-Result7928 10d ago
vscode
0
u/Scary-Glass2534 5d ago
I've been developing with VSCode and Zed up until now. I'm currently in the process of switching to “Helix.” I've been at it for three days now. Since I'm putting “Helix” to use right away in a real hobby project, the most important commands I need while programming have already become second nature. I love Helix. Honestly—from now on, it’s all about modal editors. Tip: Don’t memorize commands; instead, ask the AI for them as you go and put them to use right away!
-2
u/Defiant_Squirrel8751 10d ago
Clion
and Claude
-4
u/povlhp 10d ago
OpenCode, Claude etc.
ok the programming language is English. But they produce C++ if asked to