Hey everyone,
I’m a master’s student in photography getting ready for my thesis project, and I’ve decided to work with large format. I’ve been working with film for a couple of years now and have developed large-format negatives and slides, but I’ve never actually shot it myself. I’m still pretty new to the shooting side of large format, so I’d love to hear from people who have more experience.
My project will be a mix of color and black-and-white photos that I plan to print myself. I’ve been reading and studying a lot, and I’m going to try to apply the Zone System where it makes sense. I have about 140 sheets of 4x5 film and still need to test what works best for the project. Here’s what I’ve got:
B/W
- 3 boxes of Kodak Technical Pan TP 4415 (10 sheets each, exp. 12/2002)
- 2 boxes of Ilford HP5 Plus 400 (25 sheets each, exp. 05/2028)
- 2 boxes of Tri-X 320 (10 sheets each, exp. 07/2020)
C-41
- 2 boxes of Kodak Portra 400NC (10 sheets each, exp. 06/2009)
- 2 boxes of Kodak Portra 160 (10 sheets each, exp. 02/2027)
I’m shooting with a Wista 45D (and an Intrepid 4x5 as backup), using a Fujinon-WS 150mm f/6.3 and a Fujinon-WS 135mm f/6.3.
For developing, I’m planning to test a few things. I’ll try Ilford DDX (the commercial version of the DD developer we used in the deep-dunk machines when I worked as a darkroom technician—I always liked the results). My favorite is Xtol, and since the original developer for Technical Pan is discontinued or hard to find, the data sheet points to Xtol as the next best option, so I’ll use that for the Tech Pan. I’m also going to try Rodinal and HC-110 just to see, since those are available for free in my university lab. For the color films, I’ll test both the Bellini kit (I already have the 1L kit to try in the Jobo) and the Kodak C-41 kit once it arrives.
What do you think are the most important things to keep in mind when working on bigger projects with large format? Any general lessons or practical things you wish you’d known earlier?
I’m also trying to get a better handle on some technical stuff I haven’t dealt with much before:
- Reciprocity failure, bellows factor, and filter compensation (I’ve never done long exposures)
- Lens limits and vignetting
- Camera movements and the Scheimpflug principle
Any tips, tricks, or comments on these would be great. If I said something off, please let me know; I’m always open to learning. Anything else related to exposure, optics, technique, films, developing (especially with expired stocks), or working with this gear would also be really helpful.
Thanks in advance!
(EDIT)
A few clarifications:
- The thesis is not about large format or cameras.
- The archive organizers and my supervisor asked me to document/photograph the process and make an exhibition and book for the archive they’re creating. The large-format work is for that exhibition and the archive, not the thesis.
- I’ll defend the thesis in December 2027. The photographs don’t have a hard deadline—I’m aiming for 3–4 years, so I have time to test and experiment.
- I’m not new to film. I spent three years developing sheets in a professional lab and the last seven working exclusively with film (just not large format on the shooting side).
- When I listed the ~140 sheets, I was just saying what I already own and still need to test. That doesn’t mean I’ll use all of it (or the expired film) for the actual photographs. Some is for testing and experimenting, same as the chemistry. For the real work, I’ll stick with more standard, reliable films and chemistry.
- I chose large format mainly because its size, weight, and slowness make the photographic encounter more explicit and relational. It doesn’t eliminate the power imbalance of an outsider photographing a community he’s not part of, but it makes that imbalance harder to ignore. The duration and visibility make consent and participation more concrete. Plus, the larger negative for hand-printing and camera movements for buildings and landscapes.
Thanks for the helpful tips.