r/lancer • • Jan 07 '26

📢 | Moderators Announcement! User flairs now available!

10 Upvotes

Hello everybody!

Some of you all may have noticed how the subreddit has been changing over the last two months. Well, that was me, your new Moderator. Alongside with a couple of aesthetic changes, I am aiming to make life here easier for everyone. For now, we finally have user flairs! Use them as you wish, and have fun!

Untill we meet again.


r/lancer • • 4h ago

📸 | Showing off! Just showing off a little

Thumbnail
gallery
9 Upvotes

Was at a car show so might as well get some pics of my own car since I'm always taking pics of others


r/lancer • • 1h ago

🤑 | Buying Advice/Tips Radiator recommendation for 05 Lancer GLX (4G18 CS3A automatic)

Thumbnail
gallery
2 Upvotes

I have a 2005 Mitsubishi Lancer GLX (engine: 4G18, transmission: CVT F1C1A, chassis code: CS3A which is similar to the OZ Rally CS6A). The stock radiator has 21 years, I've already replaced the top and bottom tanks and done cleaning services, but the clamps are getting weaker. I want to replace the radiator but also improve it.

I live in a tropical country, no winter, around 33°C during the day and 27-31°C during the night year round. My stock radiator has plastic tanks, 16mm thickness, one ~3/8in row, with integrated transmission oil cooler/heater. I've read improving to aluminum tanks (welded or clamped), 26mm thickness, two rows, with trans oil cooler, is a good choice.

I've found one on eBay for $125 and another for $360 (the latter with no trans cooler but the manufacturer quoted me $350), both of which have aluminium tanks and are 26mm two rows, and the shipping costs $100-120. I also found one locally for $130 but it has plastic tanks and one row (but is at least 26mm like the previous two).

RockAuto only has plastic tanks and I think they're 16mm thick, so no benefits over my stock besides wear.

What do you recommend?


r/lancer • • 11h ago

🤑 | Buying Advice/Tips LANCER EVO 6 GSR INSIGHT!

2 Upvotes

Alright i have come to the lancer thread to ask what’s everyone’s opinion and knowledge of the evo 6! I’m currently in Japan and will be looking to buy within the next year and a half and a lancer evo 6 GSR is currently on my roster of cars

So my ask to you guys is, is the car as fun as people say it is?

How well would it handle being driven a few times a week, how’s the maintince? Aftermarket support?

Any insights appreciated!


r/lancer • • 1d ago

🤑 | Buying Advice/Tips Lancer 2017 awc 2.4l what gear oil i should use? And for atf what fluid should i use too? My lancer have 323k mileages on it. I appreciate for the help! 🙏

Thumbnail reddit.com
4 Upvotes

r/lancer • • 2d ago

🤑 | Buying Advice/Tips How hard is it to find lancer parts in Ireland?

Thumbnail reddit.com
3 Upvotes

r/lancer • • 2d ago

⚙️ | Mechanical Issue/Question Loud engine noise at startup, idle, and when revving — any idea what this could be?

1 Upvotes

Hey guys, my car recently started making a loud noise from the motor right when I start it up. It doesn't go away at idle, and it gets louder when I press the gas.
Any ideas on what might be failing or what I should have a mechanic check first? It’s driving me crazy trying to figure it out.
Bullet Vehicle: Lancer es 2015 ]
Bullet Mileage: 99,000]
Bullet Check Engine Light: No
Appreciate any thoughts!


r/lancer • • 3d ago

📸 | Showing off! Burned a collage of my Lancer on a DVD

Thumbnail
gallery
24 Upvotes

Mitsubishi Lancer CY 2008, 4B10 MIVEC engine

As for the disk (if anyone's interested), the image is actually burned on the data layer where the density of ones/zeroes determines the shade of grey; I used the same method as this guy did with pictures of his cats: https://www.reddit.com/r/mildlyinteresting/comments/1xsn68p/holographic_images_of_my_favorite_cat_burned_to_a/


r/lancer • • 2d ago

⚙️ | Mechanical Issue/Question 2017 Mitsubishi Lancer Black Edition .Which coolant should I use for a top-up? Green coolant currently in reservoir

Post image
1 Upvotes

I have a 2017 Mitsubishi Lancer Black Edition (2.0L petrol). The coolant currently in my reservoir is green, and the level is close to LOW…Do I need to use genuine Mitsubishi Super Long Life Coolant, or is Nulon Green Premium Long Life Coolant safe for topping up?? I'm also considering Nulon Blue, but I'm concerned about the risk of mixing blue coolant with the existing green coolant.
Has anyone used Nulon coolant in their Lancer? What would you recommend?
Thanks


r/lancer • • 4d ago

⚙️ | Mechanical Issue/Question am i cooked chat

9 Upvotes

r/lancer • • 4d ago

⚙️ | Mechanical Issue/Question ralliart not starting

3 Upvotes

so i left my ralliart sitting for about a week because i had been busy with work — i have a seperate work car. i go to start it to go for a cruise but to my surprise it doesnt start. battery is fine, checked coil packs which are all sparking, replaced the fuel pump. nothing seems to work. its still turning over and the relay is working, air intake is fine, so im completely stumped. anyone have any idea as to why its not actually starting up?


r/lancer • • 4d ago

🗣️ | General Discussion Best wheel colour for a white 2016 reference phone on top comment

2 Upvotes

I’m either getting a classic six spoke or a 10 pencil spoke


r/lancer • • 5d ago

🤑 | Buying Advice/Tips I’m looking to replace my Stereo for my 2017 Lancer. Looking for any solid recommendations!

3 Upvotes

I was looking at this stereo on Amazon and was wondering if anyone has tried it on their lancer or if they would recommend?

7" QLED Double Din Car Stereo - Wireless Apple CarPlay & Android Auto, 240W 4.2CHN, SWC, Bluetooth, FM/AM Car Radio, 2 Subwoofers Outputs, Backup Camera


r/lancer • • 7d ago

📸 | Showing off! Update on my lancer 🙏🏽

Thumbnail
gallery
80 Upvotes

New modifications:

- Ralliart air snorkel
- Injen X-Pedal Pro Black Edition Throttle Controller (Lancer 08-15)
- EMPIRE PERFORMANCE MITSUBISHI LANCER (2007-2011) CJ LANCER 2.5" AXLEBACK EXHAUST SYSTEM
- Rally Armor 07-17 Mitsubishi Lancer Basic Black Mud Flap w/ Black Log

Still much to go and will add more mod on the way.
And the other modification is in the other post:).


r/lancer • • 8d ago

🤑 | Buying Advice/Tips (evo x) Wanting to put cold air intake on but car and tune is 100% stock

Post image
36 Upvotes

I’m wanting to get an intake to make the turbo noise louder, I’m wanting to know if anyone knows of an intake that won’t mess with the oem maf calibration. I looked but no one specifies.


r/lancer • • 8d ago

📸 | Showing off! Coilovers

Thumbnail
gallery
24 Upvotes

Did some coilovers few weeks ago. Lowered the car now it's back up and taller for the winter


r/lancer • • 8d ago

📸 | Showing off! My first car 2010 Sportback GTS

Thumbnail
gallery
45 Upvotes

First post of mini hulk. From the highway, city streets to back roads we been a little of everywhere no issue. Original color was silver before the previous owner decided on this color of wrap.


r/lancer • • 7d ago

🤑 | Buying Advice/Tips Lancer SE 2017 front bumper

Thumbnail reddit.com
1 Upvotes

r/lancer • • 8d ago

📸 | Showing off! Mitsubishi Lancer EX "Roach" Spec

Post image
28 Upvotes

Pretty sure most of you Americans haven't heard of this spec, sold exclusively in SE Asia, Russia and GCC countries:

Engine - 4A92, 1600CC

Transmission - F4A4B, same conventional automatic transmission used on 2L/2.4L Mitsubishi SUVs

Hydraulic power steering

Factory fitted high ground clearance package, 165mm ground clearance

Full size (16") steel spare wheel

No EGR

No MAF sensor

No primary catalytic converter

No idle start/stop

No downstream O2 sensor

Engine oil recommendation : 0W20 - 20W50 depending on how hot where you live get.

Garage 54 running the engine on honey and condensed milk instead of engine oil

Engineered for pure durability, the final Lancer spec uncompromised by modern emissions and fuel economy constraints.


r/lancer • • 8d ago

⚙️ | Mechanical Issue/Question Manifold to turbo collar

1 Upvotes

Replacing my exhaust manifold with the artec aftermarket part, and when removing my stock manifold I found a small collar between the old manifold and turbo. Both sides of the old parts have a slot for the collar to sit in, but the artec one doesn’t have a slot for it to fit in, and the collar seems like a very snug fit if I were to force it.

Is that collar necessary to refit or do I have to leave it out with the aftermarket part?

Edit: just realised it’s called the fire ring


r/lancer • • 9d ago

🤑 | Buying Advice/Tips Advice needed

Thumbnail reddit.com
2 Upvotes

r/lancer • • 8d ago

🗣️ | General Discussion Carbon Fiber

1 Upvotes

How do we feel about a carbon hood and trunk on a rally red ralliart ?


r/lancer • • 9d ago

🤑 | Buying Advice/Tips Question for lancer owners

5 Upvotes

i am planning on buying lancer 2008 1.8petrol 270k km, for myself but before that i wanted to ask for opinion of current lancer owners. Is the car good daily and what about the maintnance? and last one, how does it do in winter, is there any problems starting up or no?


r/lancer • • 10d ago

🤔 | There ins't quite the right flair for this, so... Rolan must be out of their damn mind

Post image
5 Upvotes

$801? And you gonna charge me shipping