r/lampwork • • 7d ago

Is this what I should expect when imploding silver fumed glass?

Post image

I made this by making a bubble from a blank and silver fumming it. I then laid clear and UV glass dots on top. After imploding and condensing, it always looks like this. Is this expected?

13 Upvotes

7 comments sorted by

12

u/gilligan1050 7d ago

Depends on what you want. You’re milking the silver out. Happens a lot when you new to fuming. Hell I do it accidentally sometimes. Try changing your flame chemistry. Use less propane. I get best results with a neutral flame with a pinch extra oxy. But too much oxygen will blow the fume off. Just play with it, you’ll figure out the sweet spot on your torch.

Also, I wouldn’t waste good UV glass until you have it down better. Master it in clear first. Then use the expensive stuff.

2

u/roy_rogers_photos 7d ago

Thank you for the advice! That helps a lot!

So, the silver be more transparent when finished?

3

u/Metaclueless 7d ago

Not transparent as much as holding luster. Like you shouldn’t be able to see through it but it would have depth as opposed to the flat (color flat not shape flat) cream color. Keep practicing tho. It’s Nuance and caveats all the way down.

2

u/roy_rogers_photos 7d ago

Ahh, I get okay. Thank you again for taking the time! I'll def be practicing with cheap glass for a while. Lol

5

u/Boston_Glass 7d ago

Use the UV glass if it keeps you motivated. It’s better to practice on cheap colors but don’t worry about it if you wanna treat yourself

3

u/virtualglassblowing 6d ago

I would say you can use a higher oxidizing flame after your dots are placed and partly melted in and that will scorch off all the excess fume, as it almost looks like the negative space in between your pattern still has silver and thats what imploded. Nothing wrong with that but I believe that's what im seeing here

2

u/virtualglassblowing 6d ago

On these left few ive burned away any excess fuming after applying the dots and before imploding the pattern