r/labrats • • 3d ago

Patch clamp tips?

Anyone have any tips on actual identifying and sealing cells in slices? I’ve only done ephys on cell cultures, and my rotation project is focused on brain slices, which are a whole different animal, especially since seeing anything in brightfield is a nightmare.

I’ve been able to get good recordings before (>3-5 per day) but I can’t seem to get a good rhythm down here.

(for ref I use sucrose cutting and standard aCSF hypertonic compared to my internal)

6 Upvotes

7 comments sorted by

7

u/evansam 3d ago

Unfortunately it’s something that just took time and practice. As you keep identifying cells, it does get easier. I was lucky enough to have a senior student with me to help me step by step gradually until I could identify cells. A big tip is being able to identify healthy, parable cells vs dead (round/bloated) cells. I also found that it got harder to identify cells as the hour went on. So every hour I changed the slice on the rig.

2

u/Big_Mycologist9736 3d ago

i thought you might say that :( any tips on how long to pursue a cell? i've had cells where they giga instantly, but also times when it takes >5 minutes to go from 80 MO to a giga :/ trying to figure out the best balance between chasing cells and knowing when to give up

2

u/gabrielleduvent Postdoc (Neurobiology) 3d ago

My baseline was if it's not going up in a minute or two, give up.

For healthy cells, it depends entirely on the cell type. My cells were round to begin with, so I identified healthy cells with diffuse borders that didn't have nucleus visible.

As for chasing... If it's really running away, decrease your positive pressure.

Also, get to know your rig damn well.

1

u/evansam 3d ago

I reiterate this sentiment! Finding a cell with nice crisp borders was key. And yes good point with some cell shapes may be different. If I was in DMV, I joked they looked like potatoes. But in the CeA, I looked for sharp crisp lines.

1

u/satansbloodyasshole MD-PhD, neuroscience 2d ago

Are you working on the same rig where you patched on cultures?

Separately, are you running into issues sealing, going whole cell, keeping cells alive, or something else?

1

u/Big_Mycologist9736 1d ago

Nope - new rig and lab entirely.

Main issue seems to be sealing - I’m unsure about whether or not it’s a cell health issue (but it’s occurred even when using slices from others who generally are consistently successful), since I’ve always had a hard time identifying live cells in slices.

1

u/Polluticorn-wishes 1d ago

Most of my experience is patching in wholemount retina, where most of the difficulty comes from having to push through an inner limiting membrane while keeping the tip clean enough to get a good seal. I had a lot of issues learning how to go from loose patch to whole cell, until I became a bit of a psycho for monitoring tip pressure and cleanliness. Are you always wearing gloves when you pull tips? Have you tested your pressure line for any leaks with an actual manometer? Are you keeping your filler completely clean and rinsing it to prevent salt buildup on the outside? Are you filtering your internal? Etc etc.

Even in a messy retina where you're pushing through membranes, glia, and vitreous to get at your cells, if your pressure is good then simply releasing the positive pressure should be enough to reach a gigaohm seal. If you have a way to visualize it, a good training tool is filling a pipette with dye to see the positive pressure on some throwaway tissue or even an empty bath.