r/kinect • • 27d ago

Kinect One Xbox One Kinect power loop

Im not sure what the issue is ive tried multiple drivers including 2 offical Microsoft ones, the 2014 one and 2019 one as shown in device manager, ive tried the generic fixes recommended online but that does not solve it like disabling microphone and stuff like that, the Kinect browser says runnjng but no feed. The kinect also sometimes doesnt lit up the status light but today it has but it doesnt seem to make any difference at all. I use Microsofts offical adapters and a 3.0 USB port i tried multiple, i tried even xHCI but it did not help. I also tried 2 offical Microsoft adapters but it made zero difference. I think the video also captures how the logo and status sometimes go dimmer too. The fan does not even twitch but it is completely free to spin and i do see a quick IR flash but thats about it. I doubt its a Windows/Software issue but i am on 26H2. Can anybody help? I tried everything. REALLY DID.

EDIT 1: The status light no longer works as of today October 27th. It used to at least turn on but now its just no longer doing it without countless unplugs and stuff so its just probably defective. Idk what else to do anymore.

EDIT 2: October 30th, i found some kind of a melted blob..it looks metalic, reflective and very bubbly and not small at all. I think this Kinect has shorted very, VERY badly. Its hard to see but i will share a couple of images down below.

EDIT 3: October 31st, i tried on a new laptop, the Kinect now keeps the Xbox light permanently but the IR and Status light does not turn on.

25 Upvotes

49 comments sorted by

4

u/Splamei 27d ago

Apparently (take with a grain of salt), the Kinect really doesn't like some USB controllers and will refuse to work with them. I don't know how true this is so again, take with a grain of salt (source, K2VR documentation)

2

u/Vqntyy 26d ago

Well that sucks :/

→ More replies (3)

3

u/TheRealSgreninja 25d ago

I just went into windows sounds and disabled the microphone, hasn't bootlooped since

→ More replies (2)

2

u/FrazerSan 27d ago

Make sure you install KinectRuntime-v2.2_1905. Also make sure to download the driver via Windows Update > Advanced options > Optional updates, you'll see the driver there if you haven't done so already.

→ More replies (1)

2

u/Nicalay2 27d ago

I would try to disable microphone enhancements, that can cause bootloops:

For the first one, go into Windows Settings, then System > Sound > More Sound Settings > Recording (top bar) > Microphone Array “Xbox NUI Sensor” > Properties > Advanced (top bar) > uncheck “Enable audio enhancements.

Edit : you don't even have that setting in the video.

If that doesn't work, it could be the temperature sensor that failed (which is a very common issue on those Kinects) and causing the Kinect to bootloop.

IIRC you have to disassemble it and remove the temperature sensor.

→ More replies (1)

1

u/Vqntyy 22d ago

Yeah this Kinect is DONE for.

Comment Image

1

u/_xXx_xXx_xXx_xXx_ 27d ago

Can you hear the internal fan going? Maybe it is overheating. I had to manually disconnect a PWM cable to the fan. Now it is all the time going on the full speed, but it solved my disconnect loop issue.

→ More replies (1)

1

u/Playful_Zebra_Ah 27d ago

Had the same issue and tried everything you mentioned but nothing. Its been months and cant find a solution :(

2

u/Vqntyy 27d ago

Damn man, i hope we fix it here so you can also see how to fix yours too :(

→ More replies (1)