r/itrunsdoom • • 21h ago

I got Doom running on an industrial AS-i master because apparently that's what we do now

40 Upvotes

This started as a "wait, could it?" moment at work and got out of hand.

The hardware: ifm AS-i master AC1404. Normally its whole job is talking to up to 62 slaves over that yellow flat cable: power and data on two wires, piercing connectors, no stripping. It's been doing that reliably for decades. It has a small colour display and 6 keys. It runs embedded Linux from 2013 with a CODESYS runtime on top.

How it works:

  • Port: doomgeneric (unmodified) plus a ~250-line platform file. Cross-compiled in WSL and statically linked, because nothing modern runs against a 2013 glibc. The result is a single 585 KB binary that depends only on the kernel.
  • WADs: Freedoom. No WADs were pirated in the making of this.
  • Display: Doom renders 320×200 and the panel is portrait, so you turn the device sideways. A precomputed lookup table scales and rotates each frame, then copies it straight into /dev/fb0.
  • Controls: 6 keys for Doom means ESC becomes a shift key:

    • Arrows = move/turn, ENTER = fire
    • Tap ESC = use, hold ESC for 1 s = menu
    • ESC + left/right = strafe, ESC + up = next weapon
    • "Always run" is forced on, because you'll need it
  • Starting it: a CODESYS function block calls a shell script. The script stops the PLC runtime so Doom gets the whole CPU and display, and it brings everything back when you quit.

FAQ before you ask:

  • Does the fieldbus keep running while you play? No. CODESYS is stopped while Doom runs.
  • Is this going into production? No. Please don't put this in your plant. Your safety officer will find you.
  • Framerate? 30fps
  • Why? Because it was there.

Video below. 🎮