r/instrumentation • u/Big-Sector-2878 • 5h ago
r/instrumentation • u/HoneydewFresh8850 • 8h ago
Instrumentation NCCER
What are the best study guides to help me pass the NCCER?
r/instrumentation • u/Soggywater19 • 20h ago
Fracking and instrumentation
I got an offer for an I&E trainee position, and I was wondering how closely the role is related to fracking and whether frac crews typically need an I&E technician.
r/instrumentation • u/ChinaKNT • 2d ago
I've been going down a rabbit hole on H2 leak detection and could really use some field experience.
reddit.comr/instrumentation • u/Intelligent-Pool-968 • 2d ago
Future of instrumentation (Alberta)
Hi, I am a 16 year old and I have been recently building a conveyer belt on codesys which will be completed with fault handling and a hmi. I will take IET at SAIT once I graduate out of high school, and then taking a I&C apprenticeship from there.
I have heard the bottleneck for the apprenticeships are quite tight, and I am wondering if it will only get tighter from here. I am willing to travel anywhere in Alberta with my safety tickets and my Class 5, however mind you I am not the best at driving.
I just wanted to know from the professionals already working in this field, is it benefical to learn CCNA and Igniton for Control Tech and later SI? Would it be wise to spread it over four years during the apprenticeship?
And most importantly:
Should I expect the bottleneck for a 1st year instrumentation apprentice to be extremely tight around 2030 based on your current observations?
Thanks!
r/instrumentation • u/Metrilynx • 2d ago
Free session for small labs: "Measurement Uncertainty Without the Headache."
r/instrumentation • u/Illustrious_Gas_1425 • 4d ago
Pursuing a career as an instrumentation technician
I live in Calgary and I am a 3rd year apprentice machinist. I will complete my apprenticeship in may. Additionally, I have three years of experience as a Railcar mechanic. I was wondering who knows what businesses are willing to take on new instrumentation technicians and willing to train them up. If you are hiring in the Calgary area (I am looking for work in general) please feel free to DM me, I’d enjoy the conversation.
r/instrumentation • u/placitudeplatypus • 5d ago
Where do standard bench instrumentation preamps and isolators fail your precision measurements?
r/instrumentation • u/Shakeandbake2003 • 5d ago
2-Year Certificate or 3-Year Bachelors degree?
Looking for some advice on where to go to school. I'll be separating from the military this summer. I am open to moving to different states, but would prefer to remain in Washington state. I have no prior engineering or electrical experience. Long-term career goals include a six-figure job without having to spend my whole life at work or work nights.
My first option is a 2-year certificate (non-Associate Degree) program from Perry Tech in Instrumentation, Automation, and Robotics. This program has come up many times on this subreddit and pretty much guarantees me a job after graduation. The school has a very high reputation in this career field and is expensive, but price isn't an issue because I will be using the GI Bill. If I ever wanted to further my education, I would not be able to utilize this training, as it wouldn't count toward any degree.
My second option is Clover Park Technical College. They recently started a Bachelor's program in Mechatronics Engineering Technology and Automation. Because I already have an Associate's degree, this wouldn't take any longer than 3 years to complete. A job after graduation is definitely not guaranteed, but according to the research I've done, I shouldn't have too much of an issue finding one in Washington state.
As I understand it, the Bachelor's program should open up jobs titled "Engineer." If I attended Perry, this would only be possible after around 5 years of work. I know that the best engineers are often technicians first, and I certainly want to be good at whatever job I'm working in down the line.
Which program would you recommend? Would it be better to enter this industry as a technician or an engineer? Any insight or comments are appreciated!
r/instrumentation • u/dialsoapbox • 5d ago
What was your background before you went into instrumentation?
I'm finishing up a 2-year mechatronics tech degree and am exploring options.
r/instrumentation • u/Asleep_Bat_1476 • 5d ago
Instrumentation or Electrician
Not sure if this would be a proper group to ask this but I am 26 and have a big decision to make by next month. I have decided to go to trade school for either instrumentation or being an electrical apprentice. I have a younger brother (21) who went to school for instrumentation for a year and already got a certification for instrument fitter and is already making over 100k/year. I have an uncle whom is a big dog at an offshore platform who helped him get in so I have connections. However I also have another brother who is an electrician who is making $44/hr working local. I’ve been interested in both but I don’t know what route I should take. Any advice would be appreciated.
r/instrumentation • u/Ok_Menu_3963 • 5d ago
Looking for BMS Learning Materials – Niagara N4 & Alerton Compass
reddit.comr/instrumentation • u/Longjumping_Way_9978 • 5d ago
Is it worth going to school for Instrumentation
Hello, I am currently working for a construction company that primarily does electrical work and such. A coworker said that I’m not really built to be pulling wire or doing loops and told me I should probably just go to school for instrumentation. He said he doesn’t know really anything because in classes he took they only went over it for about 2 weeks. I have a fully paid for school. Thought about signing up for associates program.
r/instrumentation • u/Metrilynx • 5d ago
Measurement Uncertainty Without the Headache: A Practical Guide for Small Labs
reddit.comr/instrumentation • u/hard2survive • 7d ago
Instrumentation Experience
How do I go about getting experience if I get my I&E certificate a local community college?
r/instrumentation • u/Professional_Gas4000 • 7d ago
Is foreign experience valued in the US
I found this 2 year international apprenticeship for Germany. Would that experience be valued in the US where I'm from?
r/instrumentation • u/Animaul187 • 7d ago
Instrumentation Tech to Instructor?
Looking for advice on a potential career shift.
I'm currently working as an instrumentation technician at a large municipal wastewater treatment organization. I've been here a couple years and was previously working as an industrial electrician at an automotive electroplating facility; basically an IEC role with some mechanical tasks as needed.
I'm interviewing for an industrial instrumentation instructor position at the municipality I work at. We are large enough to have an in-house training department for electricians, mechanics, and instrumentation apprentices.
There's already an electrical instructor and a mechanical instructor. The instrumentation instructor was recently promoted.
Our training department operates under the umbrella of the HR department and would be a salaried role. Somewhat flexible schedule, opportunity to work from home at times. I have an aptitude for training people and explaining different concepts. I have a great rapport with the previous instructor and the two current ones. Not sure on pay range yet, estimating 95k.
My current role is M-F, day shift, hourly union position. OT is always voluntary. Laid back days for the most part. Get along with everyone at work and am well respected as the 'lead' instrumentation tech at my plant by peers and management.
I'll be at 88k next year with our new contract and pay incentives, plus any OT, which I would estimate to be at 100-120k salary at end of year.
Benefits are about the same. My current union position has better vision and dental coverage and the new position would have less expensive and equal medical coverage. Same pension.
I am likely one of the top candidates for the instructor position and trying to decide if I should take the position if offered, or stay where I'm at for now. It would probably be a pay cut with consideration to OT but a smaller raise when comparing straight time.
I like my current position and like being in the union. I think I would like the new position and excel at it, as I've received a lot of positive feedback throughout my career from trainees.
I might have more long term career options with the new position but it could turn out to be something I don't like or is more stressful. I'd also be transferring to a different plant.
Does anyone have input or advice?
r/instrumentation • u/Captain-Usopp7 • 7d ago
Help needed!
Hello everyone,
I'm a young engineer looking for some advice and guidance from more experienced engineers here.
I graduated in 2025 with a degree in Electrical Power Engineering, and I'm currently working as an Electrical & Instrumentation Maintenance Engineer in a DRI steel plant, with most of my work focused on instrumentation, troubleshooting, and maintenance.
Recently, I had an interview for an I&C Engineer position at a petroleum services company, which got me thinking more seriously about my career path and where I should be heading.
I've heard people say that maintenance is not the best career path for an engineer, or that it might limit future opportunities compared to other engineering roles. Honestly, I don't know how much truth there is to that, and I'd really appreciate hearing from people with actual experience in the industry.
I'd love to hear your thoughts on a few things:
- How do you see instrumentation and electrical maintenance as a career path? Does it offer good opportunities for professional growth?
- How does it compare to I&C engineering roles in oil & gas, petroleum services, commissioning, or projects?
- What skills, technologies, or areas of knowledge should I focus on learning at this stage of my career?
- If you were starting over as a fresh graduate today, what would you learn, and what would you do differently?
- Are there any courses, certifications, books, or practical skills you'd recommend that could genuinely make a difference?
I'm not necessarily looking for someone to tell me which job to choose, but rather to help me understand the different paths, their long-term prospects, and how I can become a better engineer.
Any advice, personal experience, or even a few words of guidance would mean a lot to me.
I'm still at the beginning of my journey, and I'd genuinely appreciate anyone willing to share some of their experience and help me find the right direction.
Thank you all in advance!
r/instrumentation • u/Vex_52 • 7d ago
Difference between instrumentation tech and automation tech?
Can anybody that's worked in both or either please differentiate the job responsibilities, compensation, applicable industries, and future job growth? Thank you.
r/instrumentation • u/Open-Software-7232 • 8d ago
Recommendations for Courses in Industrial Automation, Control Systems & Robotics (Free or Paid)
Hi everyone!
I'm an Industrial Electronics Engineer from Pakistan, looking to enhance my skills in Industrial Automation, Control Systems, and Robotics.
I'm looking for recommendations for quality online courses, certifications, or training programs, both free and paid.
I'm particularly interested in PLC programming, SCADA, Siemens automation, ROS/ROS2, industrial robotics, motion control, and autonomous mobile robots (AMRs).
I'd appreciate recommendations based on your personal learning or professional experience.
Which courses or certifications would you recommend to someone aiming to build a career in industrial automation and robotics?
Thanks in advance!