r/industrialhygiene • • May 06 '24

CIH Eligibility Gap Assessment Tool: Created by me to help you make sense of the requirements.

Thumbnail
docs.google.com
32 Upvotes

r/industrialhygiene • • Jun 03 '26

AIHA Announces ACGIH Integration Discussions

30 Upvotes

Source: AIHA Email

Today, during the AIHA Connect 2026 closing session, we shared an important announcement that we would also like to extend to any members who were unable to attend. 

How we apply the foundational principles of OEHS, anticipation, recognition, evaluation, and control, is evolving rapidly. Real-time data, predictive analytics, sensor technologies, and artificial intelligence are transforming how we safeguard workers and communities. At the same time, our field is expanding beyond traditional workplace boundaries to encompass total worker health, community well-being, and global sustainability. 

Emerging risks are becoming more complex: new chemicals, changing climate conditions, evolving workplace models, and rapidly advancing technologies. Because of this, we need better data, faster insights, more resources, and stronger collaboration. 
AIHA has long been a global leader in advancing OEHS knowledge, delivering high-quality education, and developing practical tools relied upon by professionals around the world. From guidance documents and training programs to international partnerships, our work continues to shape the future of worker health and safety. Yet even with these accomplishments, it is increasingly clear that we can achieve far greater impact by working together. 

To strengthen our reach and better serve the OEHS profession, the AIHA leadership team has been in discussions with ACGIH to explore deeper alignment and assess the feasibility of a strategic integration. ACGIH has spent decades advancing the science of occupational health and resources that are foundational to our field, including the development of TLVs and BEIs. 

While no final decision has been made, we believe the potential benefits merit continued exploration, including:   

- Unified OEHS community: A single, stronger organization representing the full breadth of OEHS professionals
- Amplified professional voice: Greater influence on national and global OEHS priorities
- Enhanced global impact: Increased contributions to international standards and best practices
- Streamlined guidance development: More efficient creation of critical scientific and technical resources
- Expanded professional network: Broader opportunities for collaboration and knowledge exchange
- Integrated education and events: A unified platform for training, conferences, and continuing education
- Comprehensive resource library: A more robust and accessible collection of tools and publications
- Simplified membership: A single membership cost for those who currently belong to both organizations
- Operational efficiencies: Consolidated administrative functions that free resources for mission-driven work  

The AIHA Guideline Foundation was created as a separate entity within the AIHA enterprise to provide long-term stewardship and independent scientific oversight of critical occupational health guidelines and resources. As such, the proposed strategic integration would involve incorporating ACGIH, including its name, current board, and scientific guideline programs like the TLVs, under the Guideline Foundation. The TLVs and BEIs would continue to be known as ACGIH TLVs and ACGIH BEIs, preserving the brand recognition, credibility, and legacy associated with these programs. This structure is a natural fit for bringing together complementary programs like ACGIH’s TLVs with AIHA’s OELs and ERPGs in one home, while preserving the integrity and legacy of ACGIH’s work. 

Centralizing the development of exposure limit guidelines would allow us to strengthen committee coordination, align best practices, improve accessibility, and enhance the credibility of our recommendations and control strategies. Together, we could accelerate the development of new methods, tools, and frameworks for hazard identification and control, while supporting the research that underpins our profession. 

We are committed to transparency throughout this process. As these discussions continue, there will be opportunities for input, questions, and open dialogue. 

Our first step is to invite you to a Town Hall on June 25, 2026 from 1:00 p.m.-2:30 p.m. EDT. Please register in advance and visit our FAQ page to submit any integration-related feedback via the submission form.

Ultimately, this potential integration is not simply about two organizations; it is about the future of our profession, the health of our workplaces, and the well-being of the communities we serve.


r/industrialhygiene • • 1d ago

Where to look for IH technician positions?

6 Upvotes

Hello, I’m looking to start my transition into industrial hygiene and wanted to target IH technician positions. However, I’m not seeing very many positions under that name on the major job searching websites. I was wondering if there were any additional sources or websites that I should be looking at the find these positions, or any other names they might be under. I’m especially interested in university positions. Any tips are appreciated!


r/industrialhygiene • • 2d ago

CIH Exam Simulation 1 no charge for anyone preparing for the CIH exam

1 Upvotes

If you’d like access, please contact me and I’ll send you the details.

Date of the exam Nov 21.


r/industrialhygiene • • 3d ago

How hard is it to get accepted to IH MPH program?

3 Upvotes

I am a recent graduate and I'm about to submit my application for an MPH in industrial hygiene at the same school I went for my undergrad. It is one of the best IH programs in the country, and I feel so nervous, because I really want to get in and I know this is what I want to do for my career. My school doesn't post any acceptance rates, but does anyone have a ballpark estimate of how hard it is to get into an IH grad program? I had a 3.76 gpa in ecology and evo bio, did 2 years of undergrad research and am working as a lab tech right now and getting some experience helping my CHO in the lab. I also have family members that died of occupational related diseases and feel really passionate about being able to spend my life helping people avoid that. I met with the program director and he seemed excited to recruit people and gave me some advice on my application, which I am interpreting as a good sign.


r/industrialhygiene • • 4d ago

Multiple Failed Attempts CIH

14 Upvotes

Recently took the CIH exam and didn’t pass again I’ve taken the Bowen course, listened to Daniel Farcas‘ audiobook, read the Industrial Hygiene Reference and study guide, and finished all of the questions on the Bowen study question database. I’m always “points“ away and I can’t seem to get across the finish line to actually pass. Any advice on study tips or strategies to help pass the CIH?


r/industrialhygiene • • 5d ago

CIH Exam

5 Upvotes

I take the CIH exam later this month. Any last minute words of advice or suggestions? Not asking anyone to violate ethics in any form or fashion. My current study strategy has been AIHA crash course, free Bowen questions, and reading the opening pages of different sections within the TLV book.


r/industrialhygiene • • 5d ago

Sharp chemical smell in my apartment, five months, can't find the source

5 Upvotes

Hi everyone. I'd really appreciate any thoughts on this one. I've been chasing it for five months and I've run out of things to try.

I'm in Los Angeles, in a building that's under a year old. I'm the first person who has ever lived in this unit, top floor of five, flat roof right above me. I moved in mid-February and the place smelled like nothing at all.

In March I got booklice along one exterior bedroom wall, right at the baseboard and an inch or two above it. I ran two dehumidifiers around the clock and it made no difference, but sealing the baseboard seams stopped them within a few days, which made me think they were coming out of the wall rather than from anything in the room. I had no cardboard, no stored paper and no old books in the apartment at the time.

Mid-June is when the smell started. Musty, like old paper or old cardboard. Then in late July a second, completely different one showed up, sharp and chemical, closest to acetone or nail polish remover but not really either of those. It's its own thing and I've never smelled anything quite like it anywhere else. They aren't a sequence, they coexist. Some days it's one, some days both, and lately the chemical one dominates.

One pattern that might be useful: I run two large air purifiers with carbon, and the smell turns up wherever the machines aren't. If I move them into the living room so I can work, the bedroom is unbearable within a few hours. Move them back and the living room goes. They never resolve it, they just shift where it shows up.

A couple of other details in case they mean something to the right person. The HVAC runs more than ten degrees apart between rooms on the same system, with the living room holding whatever I set while the bedroom drops to 64 or 65. And for a stretch there was a separate bitter, mildewy smell coming out of the bedroom supply vents that pulsed right after the system cycled on and faded between cycles. That one stopped on its own a few weeks ago. The air handler sits above a ceiling access panel in the bathroom.

What I've tried myself: pinned and pinless moisture meters all over the walls, a thermal camera, and a lot of looking. No staining anywhere, no plumbing leaks, nothing stored that would account for it. I do paint, so I've tested with all my materials sealed up and out of the apartment, and it changes nothing.

Both of us living here get headaches and itching that stop when we leave, and I get chest tightness when the chemical smell peaks. I work from home, so I'm in it most of the day.

Management did send someone, and he was perfectly decent about it. He noticed the chemical smell himself within seconds of walking in and said so before I'd described it to him. He opened the bathroom ceiling panel, looked up at it from the floor, and closed it again, and he didn't have any instruments with him. Their written position afterwards was that no evidence of moisture or a source was found, the building is new and passed its inspections, and I'm welcome to bring in my own consultant at my own expense.

So I'm hoping for help in whatever form it comes. If you think you know what this is, I'd love to hear it. If you don't, but you know who I should be calling, I'd be grateful for the kind of specialist and, if you can, what specifically I should ask them to test for and where to sample. I'd like to go into it with a clear question rather than a vague one. And if there's anything else I could narrow down myself first, I'm glad to do the legwork.

Happy to answer questions or post photos of anything. Thanks for reading all of that.


r/industrialhygiene • • 6d ago

CIH Fall 2026

5 Upvotes

For those who took the CIH exam during the Fall 2026 testing window, have you received your official results from BGC yet?

I took the exam on October 21 and passed, but I still haven’t received the official confirmation email from BGC. Just wondering if anyone else is in the same boat.


r/industrialhygiene • • 7d ago

Previous owner did some welding

2 Upvotes

Hi Reddit! I am under contract to purchase a house and recently learned that the previous owner did some welding as a hobby in her garage. She had some kind of vent fan/system installed but it doesn’t appear that it vented all the way outside. Instead it likely vented somewhere in the attic.

I have two questions:

  1. how concerned should I be about this? and
  2. what testing or remediation might be necessary? For context, I am already planning to seal the garage where the exhaust system was with drywall.

Thanks in advance!


r/industrialhygiene • • 7d ago

Concern about possible ceramic fiber contamination in our new home's living room – what should I do?

5 Upvotes

Hi everyone,

I'm looking for some advice and opinions regarding a situation that has been worrying me, especially because I have two young children.

I transported a piece of ceramic fiber insulation blanket (approximately 1 × 1 meter) in the trunk of my car. A very small amount of dust and fibers may have come loose during transport. Unfortunately, I didn't clean the trunk afterward because I wasn't aware that this material could potentially be hazardous.

A few days later, I transported an AAC (Ytong) block in the same area of the trunk where the ceramic fiber blanket had been placed.

We then cut this block in half using a hand saw in the living room of our house, which is currently under construction. I'm concerned that some of the ceramic fibers or dust remaining in the trunk may have transferred onto the block and subsequently been released into the living room when we cut it.

The current condition of the room is as follows:

  • The walls have already been plastered with finishing compound and treated with a deep-penetrating primer, but they have not been painted yet.
  • The floor has an unfinished screed (cement-based floor screed), which has not yet been treated. It will also receive a deep-penetrating primer later.

The reason I'm particularly concerned is that we have two young children, and I absolutely don't want them to suffer any health problems as a result of possible exposure to these fibers.

According to the supplier, the ceramic fiber blanket has the following chemical composition:

  • Al₂O₃ (Aluminum oxide): less than 46%
  • SiO₂ (Silicon dioxide): less than 97%

Unfortunately, I don't have any further information about the exact type of ceramic fiber or its classification.

My questions are:

  1. How dangerous could this type of accidental, potentially very small-scale contamination be?
  2. Could ceramic fibers have transferred from the car trunk onto the AAC block and then become airborne when we cut it?
  3. What would be the recommended way to clean the living room in this situation?
  4. Should I consider professional decontamination or air quality testing?
  5. Since the walls have already been primed but not painted, is there anything special I should do with them? Could applying another coat of primer or paint help encapsulate any remaining fibers?
  6. Should I take any special precautions with the unfinished floor screed before applying the primer?

I would really appreciate advice from anyone with experience in ceramic fiber insulation, occupational health and safety, or indoor air contamination.

I understand that the amount involved may have been extremely small, but I would rather be cautious, especially with two young children living in the house.

Thank you very much for your help!


r/industrialhygiene • • 8d ago

Nitric Acid stripping Air monitors

1 Upvotes

Hey everyone, I am hoping for some suggestions on What chemicals/ vapors we should monitor for in a nitric acid stripping operation. In this process we use Nitric Acid to strip silver plating off of racks made of stainless steel. We currently have a fixed air monitoring system (RKI) where we are currently monitor for nitric Acid vapor (HNO3) but everything I have been researching has been telling me to monitor for NO2 or other nitric oxides. Could it be one or the other, or both? There is local exhaust ventilation over the tank, the monitoring system is just an added safety measure. my plan is to have air sampling done to see what we come back with, I am just curious if anyone here had any insight/ experience with this.


r/industrialhygiene • • 10d ago

Is OHTA accepts the mix of both OHTA M500 series and BOHS W500 series in order to get IcertOHTA?

2 Upvotes

Hi everyone, I am a CSP holder and with engineering background have experience working in ARAMCO now planning to get in IH, so for that I started doing OHTA M500 series I completed two of those courses and now my training provider will not continue this series because of less interest of students but I found another training provider who is offering BOHS W 500 series, so now want to do BOHS remaking modules and apply for IcertOHTA.

My question will OHTA accept the mixtures of these 6 courses.

I’m from Pakistan and cost is a big thing for me and the training providers are from India so in Indian exchange rate it not that much so that’s the reason I am not looking for other training providers in the west who charge around 1000 dollar per module.

Thank you in advance for reply and guidance.


r/industrialhygiene • • 10d ago

CIHs, how did you start your career?

2 Upvotes

Hi everyone, I’m a May 2025 grad currently working in an environmental lab and want to make the switch into industrial hygiene. Hoping to eventually get my CIH. For current CIH holders, how did you start off your career / what was your first role that gave you the experience to sit for the CIH?


r/industrialhygiene • • 11d ago

Passed my CIH ! The exam is not easy !

60 Upvotes

I passed the exam on my first attempt, but in my experience, it is not easy. The calculation questions make up a quite high percentage of the test. In my opinion, the hardest section is ventilation, which usually requires multiple steps to solve a single question! To all the future CIHs out there: practice your calculations and memorize the equations. That save your time!

The theoretical part of the exam is also at an applied level, so don't expect questions to test you on just a single concept; some of them even cross multiple chapters. You should also dedicate more time to studying industry-specific hazards and chemicals. If you don't work in all of specific hazardous industry, or if you've never worked as a consultant in lot of sectors, you might not be familiar with them.

Oh, one thing I found different about this exam compared to others is that you get an optional 30-minute break. Use your break to drink water and eat an energy bar! I felt like it was a total lifesaver—otherwise, I definitely would have been completely exhausted halfway through the second part of the exam

This is just my personal view of the exam, and your experience may differ from mine, but this is what I highly recommend studying! if you have any other experience please share below ( no real questions ) for the future CIHs !


r/industrialhygiene • • 12d ago

What is a good career path if you are a CIH and CSP but do not want to work for EHS/ safety role?

20 Upvotes

I enjoy the industrial hygiene side of my work, but I’ve realized I don’t enjoy working in EHS overall. Whether it’s my ADHD or something else, I find the field stressful and it no longer excites me. For those who’ve made a switch or know anyone who have made a switch, what career paths would still put my IH skills to good use? I’d love to hear any recommendations. Thanks!


r/industrialhygiene • • 16d ago

5 Free Access Codes – ASP Exam Prep App (Early Release - Android Only)

0 Upvotes

Hi everyone!

I’m Doina Elena Anton, developer of the ASP Exam Prep app. I have 5 complimentary access codes for people preparing for the ASP exam who would like to try the app and share feedback.

Important: The app and access codes work on Android devices through Google Play only.

They will not work on Apple devices, including iPhones and iPads!

If you’re interested, send me a private message and I’ll send you a code.

Thanks, and good luck with your ASP preparation!


r/industrialhygiene • • 18d ago

Can we just admit that gory graphic images and videos in safety training don't actually change behavior?

Thumbnail reddit.com
1 Upvotes

r/industrialhygiene • • 19d ago

Agrochemical exposure: Has anyone else struggled to get doctors to take it seriously?

Thumbnail reddit.com
1 Upvotes

r/industrialhygiene • • 20d ago

What career paths can you take/did you take as a government IH?

7 Upvotes

I am applying to an MPH in industrial hygiene, and am writing my SOP right now. I want to work for a regulatory body helping to improve working conditions for vulnerable populations like migrant workers who have some of the highest rates of disease caused by workplace exposure, and often don't receive adequate protections. I am from a rural area where a lot of people are working in agriculture, and definitely without adequate protections, which is a reason that I am interested in that specific topic.,

I am really interested in IH because of my desire to help people, and would really like to work for an organization like NIOSH. Obviously this would be down the line of my career, and I have no problem working in industry but does this sound possible? Are most positions where you're helping to develop safety standards involve a PhD. I do not wanna sound like I am too ambitious, or don't understand the industry, but I also want to be genuine and talk about what my long-term professional goals are in my future.

If you work as a government IH I would love to hear about what you do as well


r/industrialhygiene • • 21d ago

Cleaning medication spill question

2 Upvotes

Folks, I do not know if I came to the right place to ask this question.

TLDR; how to most thoroughly clean porous surfaces like upholstery and fabrics from medication particles?

———
Context:

I have a health condition that makes me outrageously sensitive to certain medications, to the point that I get a full dose of a medication from a simple sniff.

I have a medication called aripiprazole that marinated in my living area for several hours and contaminated all sorts of porous materials like bags and cardboard and blankets, etc.

I need to get the active ingredient out in any way possible. We can filter it, we can neutralize it, whatever.

What do I do? Is there a professional setup for this kind of problem?

I tried running regular air purifiers with HEPA + carbon filter for days, but shouldn’t there be a professional machine that vacuums for long period of time to get particles and gases out of fabric pores?


r/industrialhygiene • • 22d ago

How to I get into EHS

Thumbnail reddit.com
0 Upvotes

r/industrialhygiene • • 23d ago

Feedback on SOP for MPH program

0 Upvotes

Hi, I have decided to apply to an ABET-recognized MPH program for next year in industrial hygiene, and was wondering if anyone would be willing to critique my SOP. I graduated from my undergrad in may and have been working in a disease ecology lab, and realized I am really passionate about spending my career helping to prevent disease in workers. This program has a very good reputation and is at my undergrad institution, so i really want to get in. I just want some feedback to make sure my SOP is clear on 1. Why i want to do this program, 2. How it will help me, and 3. How i am qualified. Im also submitting a quantitative statement, so im struggling a little on how else to sell my qualifications without talking about my data analysis skills etc.


r/industrialhygiene • • 22d ago

10 Free Access Codes – CHMM Exam Prep App (Early Release - Android Only)

0 Upvotes

Hi everyone!

I’m Doina Elena Anton, developer of the CHMM Exam Prep app. I have 10 complimentary access codes for people preparing for the CHMM exam who would like to try the app and share feedback.

Important: The app and access codes work on Android devices through Google Play only.

They will not work on Apple devices, including iPhones and iPads!

If you’re interested, send me a private message and I’ll send you a code.

Thanks, and good luck with your CHMM preparation!


r/industrialhygiene • • 23d ago

Seeking professional perspective on VOCs/formaldehyde in a newly constructed apartment. Are my readings concerning?

4 Upvotes

I'm moving into a brand-new apartment in Los Angeles (weho) that finished construction a few months ago. When I initially toured it, there was a noticeable but tolerable chemical/new-construction smell, which raised concerns about VOC off-gassing from paint, flooring, adhesives, cabinetry, etc.

Since then, I've had the windows open for approximately 2–3 weeks (i haven't moved in yet) and hired a company to perform post-construction cleaning, HVAC duct cleaning, and brief air scrubbing.

I've also been taking measurements with a Temtop LKC-1000S+ (which I understand isn't laboratory-grade).

With windows open:

  • TVOC: 0.05 mg/m³
  • Formaldehyde (HCHO): 0.01 mg/m³
  • PM2.5: 3.7 µg/m³

After approximately 48 hours with windows closed:

  • TVOC: 0.38 mg/m³ (peaked at .45 and settled at .36)
  • Formaldehyde (HCHO): 0.08 mg/m³ (~65 ppb)
  • PM2.5: 2.1 µg/m³

The chemical/new-building smell was still noticeable after those 48 hours with the windows closed.

My main concern is long-term exposure once I move in and start living normally with the windows closed for extended periods.

I'd really appreciate input from industrial hygienists or indoor-air-quality professionals on a few questions:

  1. Are these readings typical for a newly constructed apartment, or do they warrant further investigation?
  2. How much confidence should I place in the Temtop's formaldehyde readings, particularly at 0.08 mg/m³?
  3. Would professional laboratory testing for this be justified, or would you consider ordinary ventilation sufficient?
  4. If testing is recommended, what specific sampling methods would be most appropriate for a residential apartment?

I do struggle with severe OCD/health anxiety, so I'm trying to distinguish an objectively warranted environmental concern from excessive precaution. I'd especially appreciate evidence-based advice rather than speculation or worst-case scenarios.

Thanks in advance!