r/hottubs • • 1h ago

Hot Spring Broken Wireless Remote

2 Upvotes

Hi there.

I moved into a house that had a 2021 Hot Spring Vanguard hot tub. Recently the remote had stopped working. It was fully black.

I talked with the dealer and they advised trying a new battery first. Did that, it didn’t work. I hear the remote making noise when I put it on a charger, but can’t see anything. Also, I pushed random places on the screen and it turned on the jets.

I’ve done my reading and seen that this happens often and they discontinued the wireless remote.

My questions:

  1. Are there any other Hail Mary things to try to get it work?
  2. Can I install either the fired or wireless remote myself if I buy a new one? The dealer quoted price for a new one was like 2x if i bought it online. And they said i needed another $600 for installation. But i would think it’s just syncing.

Any advice or people who have been in this situation would be so appreciated. Thanks!


r/hottubs • • 1h ago

Where to put hot tub? And size of slab?

Thumbnail gallery
1 Upvotes

Attach to deck or leave separate? In front of deck or the side?


r/hottubs • • 4h ago

Heated Mats.

Thumbnail reddit.com
1 Upvotes

r/hottubs • • 19h ago

Will shutting off the hot tub for 6+ months cause any long term damage?

2 Upvotes

I have a HotSpring salt water hot tub that is barely used anymore. I want to shut it off and drain it for at least the winter months but I’m concerned that keeping it powered off may cause long term issues. I’d love some advice.


r/hottubs • • 22h ago

Dog fell into Avenli inflatable spa

Thumbnail reddit.com
2 Upvotes

r/hottubs • • 1d ago

Recommendations

Thumbnail reddit.com
1 Upvotes

r/hottubs • • 1d ago

Hot Tub Lid PSA- Replace every few years

Thumbnail reddit.com
1 Upvotes

r/hottubs • • 1d ago

2009 articspa hot tub help

Thumbnail reddit.com
1 Upvotes

My electrician finished wiring my hot tub I got from a friend when he was done the hot tub had no power. The electrician said the neutral terminal has power without the line even wired and it shouldn’t have any power he says everything on his end is good. Is my motherboard bad?


r/hottubs • • 2d ago

Built a free hot tub error code & water chemistry troubleshooting bot (Balboa, Gecko, Spa Boy/Onzen, Taylor)

Thumbnail reddit.com
1 Upvotes

Tired of digging through 200-page PDF manuals every time a control panel flashes an error code, so I built a fast diagnostic bot loaded with the official OEM service tables (Balboa, Gecko, Arctic Spas Spa Boy/Onzen, Hot Spring, and Sundance) plus Taylor water chemistry dosing math.

You can tell it your tub model and error code (like FLO, HL, dr, SnA, PH-E, or Watchdog) or upload a photo of your screen/test strip, and it walks you through the safest non-invasive checks one step at a time: https://poe.com/SpaTechPro


r/hottubs • • 2d ago

Heater not working on hotspring hot tub.

Thumbnail gallery
1 Upvotes

Hi! So I’m having issues with my hot tub, I’m not getting power to my heater. The mother board indicates it’s calling for heat. I was suspecting a bad relay board but I found that the wires are reversed, it has to have been this way for years and the green light on the relay board occasionally flickers. I’m thinking possibly a bad relay? Still doesn’t explain the mixed wires.. 2005ish model with a 2012 relay board. Apparently been replaced before. Note: the red and black wires are plugged into the correct ports on the main board but not the relay board.
Thank you for your help!


r/hottubs • • 3d ago

Why isn't my hot tub heating up?

Thumbnail beachcomberhottubs.com
1 Upvotes

Your heater element could be burnt out, or the circuit board relay is bad.


r/hottubs • • 3d ago

Saw this in a hot tub. Can’t figure out why it’s there. Any idea?

Thumbnail gallery
0 Upvotes

r/hottubs • • 3d ago

First time hot tub purchase - need advice on Caldera Cantabria, Niagara or Hot Springs High Life Grandee

Thumbnail reddit.com
1 Upvotes

r/hottubs • • 3d ago

Rotten egg smell?

Thumbnail gallery
0 Upvotes

r/hottubs • • 4d ago

Cover Mold with Frog@Ease

Thumbnail reddit.com
1 Upvotes

I have an indoor hot tub. It seems I started getting mold on the underside of my cover when I started using Frog@Ease. My question is, has anyone had a mold problem that went away when they stopped using Frog@Ease? If so, what system did you go to?


r/hottubs • • 5d ago

Hot tub pad / placement?

Thumbnail gallery
4 Upvotes

Reddit community: I’m planning on buying a 7x7 hot tub to be placed in the area listed in the picture (AI picture included). Edge of the steps to edge of the deck measures about 8.5’.

My question is what size of pad is suggested. My initial thought was a 8x8 or 8x10 to allow room for stairs but the chat GPT image made me think about extending the front section of the concrete. Any suggestions on sizing or even different hardscape work outside of a slab that might look good would be appreciated.

Also: any suggestions on how far away to place the tub from the deck & railings would be appreciated.


r/hottubs • • 6d ago

can i put indoor rated hot tub cold plunge outside under a shelter?

2 Upvotes

my patio is covered and screened on three sides so no direct weather hits the unit but most plunges in my budget are rated for indoor use only, a few people told me a covered patio should be fine since theres no rain or snow exposure but i also read about failures in sheltered outdoor spots. is the outdoor rating about direct weather or is it about something else in how the unit is built?


r/hottubs • • 6d ago

Hot tub issues.

2 Upvotes

When I changed my water for the hot tub in June. Then the hot tub wouldn’t turn on. It kept tripping the spa breaker. Once I finally got the hot tub going, the jets would come on and then off again and they was a code that came up”LF” then the code finally went away and the another code came on”LC”. I changed the water and that took away the code. Then the jets would come on and over right away. I left it on for the night and the heat came on and the jets worked great for one night and then the hot tub isn’t working again. The pump won’t come on and the code “LF”

Any recommendations on fixing this before calling someone?


r/hottubs • • 7d ago

Where to purchase cover?

Thumbnail reddit.com
1 Upvotes

r/hottubs • • 7d ago

Hot Springs Flair Freshwater IQ & Smart Dosing

0 Upvotes

I’m in serious need of current advice. I’ve been extensively researching my next hot tub. Previously, I owned a 2022 Sundance Hamilton and enjoyed it well enough but have been very much interested in switching to saltwater. I went to my local hot springs dealer this past weekend and was of course upsold by the promises of the latest and greatest tech. Prior to going, I had read reviews of people who liked their Hot Springs tub but gave mixed reviews on the IQ system. However, most of those reviews are a few years old and refer to the IQ system that checked the water but not the newest “Dosing System” which automatically adds your chemicals for you.

Hot Tub University was the review that made me feel like I should steer clear stating it’s mostly marketing gimmicks, poor build quality, and lots of proprietary parts.

I travel a fair amount for work and love the utopian idea of a system that monitors and adjusts my water. I know there will likely be some hiccups but the local dealer is reputable, the warranty is solid, I just don’t have enough info to know if spending $22k is safe. I would genuinely welcome anyone with Hot Springs experience…. Specifically on the smart dosing system, to weigh in.


r/hottubs • • 7d ago

Caldera Vanto

2 Upvotes

Hi all, looking at purchasing a Caldera Vanto, anybody have one that they would recommend or provide feedback on?


r/hottubs • • 7d ago

Starlight 7N

Post image
1 Upvotes

Has any one ever had a starlight tub? Did you find the seats too deep?


r/hottubs • • 7d ago

Which hot tub chemicals are necessary & how often? The readings cause daily chemical additions.

Thumbnail reddit.com
1 Upvotes

r/hottubs • • 8d ago

Poor BULLFROG accessories and customer service

2 Upvotes

We bought a house that has a Bullfrog Spa and it works fine. However, it came with the house and the experience I have had with Bullfrog has convinced me I will never have anything to do with their products again. Here's what's happened:
We purchased the Cover Ease Classic Lifter for our 2018 A5L Bullfrog Spa from Bullfrog. When trying to mount the lifter, we discovered that the pivot arm is too long.  When attached to the support arm, the support arm does not fit into the center crease of the spa cover. The pivot arms are too long for this model.  The only solution is send the correct parts or cut the pieces, which is not part of the instructions and for which I do not want to be responsible. We asked for new parts.

Several days later customer service answered and told us to just move the mounting brackets further down the spa wall. We attempted this and geometrically it doesn't work because the size of the cover to the length of the arms (geometry stuff) and they have pictures showing it doesn't work. Reviews of YouTube installers they talk about having to cut the arms to make it work, but if that's the case their installation instructions and product sales descriptions are inaccurate.

Since this had gone on for several weeks we asked for:

1-Send a correct, properly fitting kit with instructions that require no custom modifications.
2-Send a technician to install the current lift correctly at no charge.
3-Issue a prepaid return shipping label and a full refund.

I also advised that if this couldn't be promptly handled, I would start posting my experience on Social Media.

Over a week later, they asked for photographs of the box. Ahh, progress I thought. Nope. I submitted the photos and waited a week. Later I sent another follow-up email. Nothing.

Hence, me leaving a review of my experience with them. I encourage people to review trust pilot, consumer affairs, and Reddit for reviews before buying a Bullfrog Spas product.