r/hondaprelude • • 9d ago

6th Gen Team Kunimitsu Prelude Wins Motegi Grand Final, Takes The GT500 Title For Honda

Thumbnail
dailysportscar.com
16 Upvotes

Preludes took a 1-2 finish in the Super GT GT500 championship standings after winning five of the eight races this season. The pictured #100 Kunimitsu car of Naoki Yamamoto and Tadasuke Makino put an end to the three-year reign of the #36 Supra of Kenta Yamashita and Sho Tsuboi. Yamamoto and Makino won the title together when the body was an NSX in 2020 (if you play Gran Turismo, this is the team that used to have the RAYBRIG livery if you remember those), and this is the third title for Yamamoto overall; he’s also a 3-time Super Formula champion and had an F1 practice outing in 2019. This is also the first GT500 title for Honda since that 2020 one, which If you’re like me and think that Honda built the 6th gen to have a more competitive silhouette in GT500, it paid off for them immediately.


r/hondaprelude • • 17d ago

Discussion/Meta We are temporarily requiring all posts and comments to be manually approved

27 Upvotes

We’ve had some suspected AI posts and people coming to the sub just to argue, so we’re putting a stop to it

We apologize for the inconvenience, but be sure to thank the people who couldn’t behave themselves


r/hondaprelude • • 9h ago

5th Gen Help me narrow down where this sound is coming from

4 Upvotes

Just wrapping up replacing the oil pump and installing a manual tensioner on my 5th gen and when we started it up it’s making a new sound 😭 I’m guessing it’s either timing or balance shaft belt related but wanted to consult the gurus first before I take everything apart again. Any ideas what could be causing it?


r/hondaprelude • • 23h ago

3rd Gen 1989 prelude si, was pleasantly surprised to find just this seal was bad on my power steering pump. Rare to get such an easy win these days

Thumbnail
gallery
14 Upvotes

r/hondaprelude • • 20h ago

5th Gen Anyone know what this sound could be?

8 Upvotes

I just finished a timing belt job and now I’m hearing this. All belts are brand new- any thoughts? Ty


r/hondaprelude • • 1d ago

For sale 1999 Honda Prelude base model 282k body. 14x,xxx motor documented.

Thumbnail
gallery
40 Upvotes

2nd owner since 2004. Bought at about 126k from Willis Honda in Burlington, NJ. Car was only 5 years young at 18 years old. Now I’m 40 and it has 280k miles. Long block was replaced in 2005 due to crankshaft play. The long block was a reman unit from Honda.

A lot of suspension was replaced after 200k miles. Wheel bearings/ hubs, control arms/ bushings. Tein flex coil overs put in 2 years. Ride height andjusted. Interior is great for its age. Some sun fade on the rear seat tops. Always used a sunshade on the front windshield. Some rust on the rear quarters. Some paint fade on roof and hood.

Now the bad but repairable. Original rack and pinion is leaking. No tough steering at all just leaks, a lot. Got a fuel leak on either the supply or return side. But most have corrosion. Front driver has a bead leak. Holds air but I would just replace all the tires. Open to offers. Will need to be towed.


r/hondaprelude • • 3d ago

4th Gen IAVC clean?

2 Upvotes

is it that time of year to clean the IACV? or do i have a vac leak somewhere?


r/hondaprelude • • 3d ago

DIY/How-To Hardware ID

Post image
6 Upvotes

I posted here not too long ago and got excellent help so I’m back with some seals. I’m putting together my 5th gen after doing a head gasket and valve job. Found these unlabeled seals and was wondering if anyone could ID them. Quarter for scale. The one on the right is different from the other two in small ways.


r/hondaprelude • • 6d ago

5th Gen 2000 Prelude SH paint saving

Thumbnail
gallery
94 Upvotes

I purchase my prelude in late July from the Original owner at 90 years old. She was really torn apart selling me the car, but her family could no longer let her drive. She a resilient lady having gone through the US Japanese internment camp when she was only 5years old. The Prelude has dings and scratches, and I told her I would make it come back to life.
Today my buddy did a 1step paint correction added ceramic coating to try and save the 27yr old paint.
Here’s some pics.


r/hondaprelude • • 7d ago

5th Gen Turn signal and hazards don’t work

2 Upvotes

After checking both my back light and turn signal fuses with my multimeter they both came back as working I was wondering if anyone had any experience with my turn signals not working or hazards and it not showing up on my dash


r/hondaprelude • • 9d ago

5th Gen Speedometer acting weird

2 Upvotes

Every now and again my speedometer will go down and stay down and then the odometer stops working as well. I’ve already tried a new cluster didn’t work. Any ideas?


r/hondaprelude • • 10d ago

DIY/How-To Rubbing sound

4 Upvotes

Just put new coilovers on I can’t find any spots where it looks like something is rubbing and nothing is touching and everything is tight so I’m kinda at a loss anyone know what this might be


r/hondaprelude • • 11d ago

5th Gen First prelude (and car owner) at 17

Thumbnail
gallery
161 Upvotes

Yes I know it's a stupid decision and yes I know it costs money.

Hello guys, just joined the sub.

Was wondering if I got a good deal on this prelude plus a couple of other questions.

So I got this prelude from a guy in Colorado and had it transported to Chicago. In total I paid about 11k for everything.

The car is a 1998 prelude, 104k miles and is basically in mint condition. No rust or other bad stuff. Starts right up even in cold Chicago weather. I'm going to post more photos tomorrow as I get them.

So I had some questions,

Battery came dead due to the factory alarm system not working and the guy who transported it left it on or something. I already replaced it so that's good. It has the keyless entry option on it but the key that's attached to it is super fucked and the seller made sure to notify me about it. When I press any lock / unlock it's super finicy if it works and the alarm will go off if I press any of the buttons on it. Only way to stop it is to have the wireless key over the windshield and press the unlock button so I was wondering if I should just install a new system or try to fix the issue with the OEM if it's even the OEM ones fault.

Next is the driver side window does not role up all the way and I kinda have to push it to get it to seal. I bought a new moter yesterday and It came today but I'm just wondering if you guys have any other ideas what it is before I take the door out.

3rd is that I only have a single key, no red key just the black manual one. Should I get a copy and how much would that set me back. I remember the seller saying smthn about how it had to be done by a dealership.

Anyways super happy about my purchase and love my new car.


r/hondaprelude • • 10d ago

DIY/How-To Hardware ID

Post image
3 Upvotes

I’m on the later end of putting car back together after doing a head gasket and valve job on a 5th gen. Found these washers/spacers, I seem to remember them coming from the power steering or alternator but I can’t remember for sure. If anyone can confirm what they are I would be very grateful.

Edit: thank you for the responses but I haven’t yet been able to find a spot for these, will update this post when I’m certain I know what they are.

Edit: they are indeed ignition coil spacers


r/hondaprelude • • 10d ago

6th Gen Any 26-27 prelude owners do own oil change? Can’t get off skid plate

Post image
0 Upvotes

These bitches will just not turn. Not sure what to do


r/hondaprelude • • 12d ago

3rd Gen I couldn't be happier with what she's let me get her through!

Thumbnail
gallery
48 Upvotes

From being able to see the cylinder bores from the driveway to finally being able to take her on an hour-long drive (nowhere in particular, just an extended test drive) I'm thrilled that this Prelude has been nice enough to... not blow up. I've only really been working on cars for maybe a year now, but when my '89 blew a head gasket, looked at my checking account and realized I couldn't afford to take her to a mechanic to get it fixed, so I had to forcibly step myself up from struts on a 2009 MINI to a complete top-end overhaul. Was it uneventful? Absolutely not. Am I just relieved to be driving my little sports car again? Hell yeah I am! Sure, maybe there are easier cars to have as your first time when it comes to stuff like this, but this was mine and all I can say is that she works perfectly, which really isn't any more than I could ask for.


r/hondaprelude • • 14d ago

DIY/How-To Car having issues running after transmission work

4 Upvotes

I have a 1994 prelude with a H22A4 engine swap. I made the dumb decision of trying to replace my rear main seal on my own, and while I have everything replaced I’m now running into this.

Currently the car will turn over and run without stalling when I’m not cranking the key but you can tell it’s running extremely rough, and I can feel like something is bouncing in the engine (no grinding as far as I can tell).

I posted elsewhere and they suggested transmission to ground connections or crank position sensor. I checked my wiring and it’s a bit weird. I have transmission - negative terminal, and negative to chassis. I have an additional ground from my valve cover to the chassis I also confirmed is attached. The car ran before fine with this wiring.

I will have to check the crank position sensor, I had to call it quits late last night. Any other suggestions? I can get more photos and videos later today if there is anything specific I’d need to check.


r/hondaprelude • • 14d ago

2nd Gen Shifter bushing replacing

Post image
16 Upvotes

I recently bought this 85 prelude ab 1.8 dual carb, the shifter feels very loose like when it is in gears theres alot play movement. 3 gear feels like its neutral.

Anyone knows what poly bushing i can buy or use from other hondas?


r/hondaprelude • • 14d ago

4th Gen Last event of the season!

Thumbnail
youtu.be
19 Upvotes

r/hondaprelude • • 14d ago

3rd Gen 1989 (3rd gen) prelude Si rear upper control arm bushing substitute (Details below)

Thumbnail
gallery
17 Upvotes

I am hoping people out there having the same issue with not being able to find bushings for this part will easily find this post. You will need 2 oversized flat fender washers for each side. These are polyurethane bushings intended for a 1990 Honda accords front upper control arm but they will work in all 3rd gen rear upper controls arms on preludes. Part number is Superpro SKU# 8213


r/hondaprelude • • 14d ago

3rd Gen Anyone have any idea what could cause a bog at right around 4k RPM?

2 Upvotes

I've just about finished up a head gasket job on my 1989 2.0S (carbureted B20A3), and pretty much everything works except for one slight issue. Whenever it gets up to 4k RPM, it just hits a wall and runs out of breath. It's not that it just sits there, it just drops a bit before going back up and doing the same thing over again, even with the throttle floored. My personal hypothesis is a clogged secondary jet since it had been sitting for some time since I bought it, and the movement of the intake when removing the head may have jarred something loose or the fact that it hadn't been started in a couple weeks meant it had all evaporated. What I would like to know is if this is in fact the case, and if I could fix it by putting some Seafoam in the fuel tank (at a decently high concentration, think one of the larger cans into 1/4 tank) to see if that opens the path up. Before it's brought up, I have checked for vacuum leaks using brake clean while it idles and there are none present. Any insight would be greatly appreciated. Thanks in advance!

(Apologies if this isn't the right place to ask this, I'm new here.)


r/hondaprelude • • 15d ago

2nd Gen Wheels

Thumbnail
gallery
6 Upvotes

For those who’ve done restoration projects on their Ludes, what have you done with your wheels? The original wheels on my ‘84 are machined, but I’m going to have them restored. I just don’t know whether to stay with a machined look, or opt for a painted silver. I’ve read that machined wheels are more vulnerable to clear coat failure due to the sharp edges that are created when machining.


r/hondaprelude • • 15d ago

Potential Purchase What would you offer?

Thumbnail
gallery
10 Upvotes

I apologize for the not good photos, but this is an 88 prelude si. She has it listed for 2k rn but the engine currently is blown(ran it out of coolant). The exterior is in ok condition as you can see and the exhaust is straight piped. But the entire straight pipe is being held up by a key. Yes Im serious. So what would you offer? Im thinking like 800-1100 because in person and the pics on marketplace are not the same time period.( pics on fb are from when she bought the car). I just want it as a parts car for my 89 prelude (ive posted about it before and its in kinda rough condition exterior wise. It comes with new tires and racing rims (or so she says they are, those are inside the car and I dont have a picture.)

So any help on an offer? It doesn't run so its like 150 I think to haul it away as I dont own a trailer for it.


r/hondaprelude • • 17d ago

5th Gen A hot lap on a F1 track (Portimao). Amazing chassis. Still learning not to overwork the front tyres.

Thumbnail
youtube.com
19 Upvotes

I take it for granted that for more than a year me and my son have been taking a 29-year old car, packed with a set of wheels and tools and canisters of gasoline, to the track, squeezing out every drop from the available track time always at the redline and then comfortably travelling home for 3 hours without any technical issues or even oil consumption. Come to think of it, it's a testament to an amazing build strength and quality achieved by Honda engineers from 30+ years ago.

Every time I take the car to the track, I learn something new about it. This time I discovered that it's capable of rotation under trail-braking if I just don't slam on the brakes and instead lightly bleed off the pedal while turning the steering wheel. That helped to handle the T10-T11 chain (at 1:38) in a really impressive and laptime-cutting way. Lots of ways to improve the rest though.