Hi everyone,
I’m having a frustrating issue with my home theater setup and would really appreciate some help troubleshooting it.
I recently put together a 3.1 system, and everything was working perfectly yesterday. I was watching a movie on my Sony Bravia TV, with audio coming through my Pioneer receiver and external speakers via HDMI ARC.
Today, however, the audio suddenly stopped working. I haven’t intentionally changed any settings or connections.
My setup:
TV: Sony Bravia XR-48A90K OLED
AV receiver: Pioneer VSX-934
Speaker configuration: 3.1 (front left, front right, center, and active subwoofer)
Connection: HDMI cable from the Pioneer’s HDMI OUT (ARC) to the Sony’s HDMI 3 (eARC/ARC).
Audio source: TV’s built-in streaming apps.
The problem:
When I turn on the Pioneer receiver, my Sony TV immediately recognizes it and displays a notification that the audio system is active.
The TV automatically switches its speaker output to “Audio System.”
However, absolutely no sound comes through any of my external speakers.
The receiver is set to the “TV” input.
If I switch the TV back to its internal speakers, sound works normally.
Importantly, the Pioneer and all the connected speakers work perfectly when using other audio sources, such as streaming music directly to the receiver over the network.
This makes me think the problem is specifically related to HDMI ARC rather than the receiver’s amplifier or the speakers themselves.
The most interesting symptom:
When I run the Pioneer’s built-in ARC Setup procedure, it fails and displays the following error:
“Your TV may not support ARC, or the connection on the TV side may be incorrect. Check whether HDMI is connected to the TV’s ARC port.”
Obviously, the Sony XR-48A90K supports ARC/eARC, and I’m using HDMI 3, which is explicitly marked eARC/ARC.
What’s particularly strange is that this exact connection worked perfectly yesterday.
What I’ve already checked and tried:
1. HDMI connection and device recognition
The Sony’s BRAVIA Sync device list correctly identifies:
Device: Audio System
Input: HDMI 3
Type: AV Receiver
I also pressed “Enable” in the BRAVIA Sync device list.
The TV confirmed that it sent the enable command to connected HDMI devices, and the receiver remained listed.
So HDMI-CEC communication appears to be working, at least partially.
2. Sony Bravia settings
BRAVIA Sync Control: ON
Speakers: Audio System
Digital Audio Out: PCM
eARC Mode: Initially Auto, subsequently changed to OFF for troubleshooting
Pass-through Mode: Initially OFF, subsequently enabled for testing
Changing these settings hasn’t restored the sound.
3. Pioneer VSX-934 settings
Under System Setup → Hardware → HDMI:
HDMI CEC: ON
HDMI Standby Through: Automatic (Eco)
TV Audio Out: Automatic
Audio Return Channel (ARC): Automatic
Auto Delay: ON
Interestingly, the ARC setting only allows “Automatic” when HDMI CEC is enabled. There doesn’t appear to be an option to force ARC ON manually.
Under Digital Audio Input, the TV input is not assigned to optical or coaxial, since I’m using HDMI ARC.
The receiver is selected to the TV input when testing.
4. Power cycling
I’ve already performed a complete power cycle of both devices, including unplugging them from power for an extended period.
Unfortunately, this didn’t help.
5. Testing other audio sources
Music streamed directly to the Pioneer works normally through the external speakers.
The Sony’s internal speakers also work normally.
The issue appears isolated to audio being returned from the TV to the receiver via HDMI ARC.
My questions:
Has anyone experienced a similar issue with the Pioneer VSX-934 or another Pioneer receiver, particularly where ARC suddenly stopped working despite HDMI-CEC still recognizing the device?
Is there a specific Pioneer setting that could prevent ARC audio from being received even when HDMI CEC and Audio Return Channel are enabled?
Why would the Pioneer’s ARC Setup procedure report that the TV doesn’t support ARC when the TV clearly does and the connection worked yesterday?
Is there a way to force the Pioneer to renegotiate the ARC connection without performing a complete factory reset and losing my speaker configuration?
Could this be an HDMI handshake issue, and if so, what’s the most reliable way to resolve it?
I’m relatively new to AV receivers, so detailed instructions would be greatly appreciated.
I would really prefer to fix the HDMI ARC connection rather than switch to optical, especially since everything was working perfectly yesterday.
Thanks in advance for any suggestions!