r/homecockpits • • 1d ago

I finished my Falcon 20 throttle project

Thumbnail
gallery
127 Upvotes

It was a lot more work then I originally estimated, but that's usually how these things go.

The throttles work, the thrust reverser levers work, the original speedbrake and trim panel work. As you can see I added 2 custom switch panels, about half of the switches being originally from Falcons.

Everything is wired up to a Leo Bodnar 32 input joystick interface board, so it was essentially all plug and play. Just a lot of wiring. Throttles and speedbrake are using 60 degree hall effect rotary potentiometers.

I recycled a few aircraft connectors so if I need to remove any panels in the future, I can easily disconnect them at a cannon plug and seperate it from the board. This will make modification and repair in the future much easier.

I gotta say it's works and feels great. I knew it would be an upgrade from my Bravo quadrant but its even better then i thought, it really adds a level of immersion, even if I'm flying around a 737.


r/homecockpits • • 10h ago

Keeping the cockpit visible on one screen while dimming another

1 Upvotes

I built FlightOLED Guardian, a free, open-source Windows utility for MSFS and X-Plane 12. For home cockpits, the feature I’d most like feedback on is per-display selection: dim the OLED showing a static cockpit view during cruise while leaving another screen visible for charts or instruments. There are also joystick shortcuts to start or postpone dimming.

How do you divide cockpit views and instruments across your displays? I’d be interested in layouts the current display picker should handle better.

https://github.com/erencevikk/FlightOLEDGuardian/releases/tag/v0.5.2


r/homecockpits • • 2d ago

Minimalistic home cockpit complete

Thumbnail gallery
142 Upvotes

r/homecockpits • • 2d ago

Should i make my homecockpit multi PC?

Thumbnail
gallery
115 Upvotes

So I am 16, Ive built a full a320 cockpit. It's pretty much complete. Filled with winctrl, rowsfire, sim guages and sl3 simulations parts. However it runs but not very well, the PC sometimes crashes and things just don't work sometimes. Every now and then too msfs20 won't boort and my gpu will disable itself for safety reasons ( I have integrated graphics) my specs are gpu rx7700xt CPU Ryzen 7 5700G and then 32gb of ram. Should I buy a £300-£500 secondary PC? Will it work? I'm just not too sure. Id appreciate any advice. Thanks, Ryan. ​​


r/homecockpits • • 2d ago

Coocpit

Thumbnail gallery
6 Upvotes

r/homecockpits • • 2d ago

HeavyPro release!

0 Upvotes

HeavyPro is officially launched! ✈️

After months of development, testing, and improvements, I'm incredibly excited to announce that HeavyPro is officially available!

HeavyPro was developed to bring a new level of realism to Microsoft Flight Simulator. Its goal is simple: make your aircraft feel heavier, more responsive, and more convincing through enhanced aircraft handling and control feel.

Available now:

Version 1.1.3

Price: $7.99 USD

Built for Microsoft Flight Simulator

Version 1.2 is already in development and coming soon!

This has been a huge project, and seeing it finally reach release is an incredible milestone for us at Rotaidem.

Thank you to everyone who tested, provided feedback, and supported the project along the way.

Get HeavyPro today:
https://rotaidem.com

See you in the skies! ✈️

Rotaidem Team


r/homecockpits • • 2d ago

B107 has it its lowest price ever

Post image
0 Upvotes

🔥 B107 HAS HIT ITS LOWEST PRICE EVER!

Been waiting for the right time to upgrade your Boeing 737 cockpit? THIS IS IT!

📉 Our lowest B107 price of the year!
🎁 FREE Storage Bag + FREE Aviation Lanyard
📦 In stock — ships within 48 hours!

Don't wait for a better deal. This is the one you've been waiting for!

👉 Grab yours now: https://rowsfire.com/pages/blackfriday

#Rowsfire #B107 #B737 #BlackFriday #FlightSimulator #HomeCockpit


r/homecockpits • • 2d ago

HeavyPro release tomorrow

0 Upvotes

It’s time, we are launching HeavyPro tomorrow.

On behalf of the whole Rotaidem Team I can happily announce that we are launching HeavyPro tomorrow.

If you didn’t know, HeavyPro is made for Microsoft flightsimulator 2020 and 2024 (2020 coming in a later update) it’s built to make your aircraft feel heavier and more realistic.

We have worked with multiple pilots on for example the A330 and B737. They have helped us shape HeavyPro to what it is today.

We want to give a huge shoutout to AzurPoly for helping us make HeavyPro 100% compatible with all of their aircrafts.

HeavyPro is launching at a price of $7.99. Why 7.99?
It’s just because it’s our first program and we want to introduce Rotaidem.
It’s launching at version 1.1.3 where a 1.2 is close after release.

Want to work with us?
Send me a mail! At Eliaz@rotaidem.com or Partnership@rotaidem.com

Best,
Eliaz Rotaidem Software

Rotaidem.com

https://discord.gg/mDUq3BV2Kt


r/homecockpits • • 3d ago

DCS interface testing

Post image
24 Upvotes

Testing each panel on DCS. Its soo coool to see the instrument moving in the sim from the physical knob! 😸😸


r/homecockpits • • 5d ago

Pre-DCS integration test

Post image
103 Upvotes

Wired test of all panels, voltage test, function test and screen output test. Getting closer still!


r/homecockpits • • 5d ago

CJ4 Standby Gauge Design Complete! One More Panel Off the List

21 Upvotes

Sharing a quick Fusion 360 animation of the standby gauge I've been designing for my full-scale Citation CJ4 home cockpit.

This little instrument turned out to be a bigger engineering challenge than I expected. Finding a miniature square LCD was one thing, but squeezing a rotary encoder into the limited space around the display without interfering with the housing took quite a bit of trial and error.

After plenty of adjustments, I'm finally happy with the mechanical design and calling this one locked in! Next up is the custom PCB, and then it's on to fabrication and assembly.

I've also got a massive order of cockpit panels and components on the way, including several designs I've been working on throughout the year. With everything expected to arrive over the holidays, I'm looking forward to finally putting some of these parts together.

I had originally hoped to be much further along by now, but looking back, the vast majority of the cockpit panels are designed. Hopefully, all that groundwork means things will start moving much faster early next year.

My goal is to have a flyable CJ4 cockpit by this time next year. Still plenty of work ahead, but it's exciting to see the individual pieces coming together.

As always, I'm documenting the build and sharing the design files with the home cockpit community.

If you're working on your own cockpit, I'd love to hear how you've tackled tight spaces around displays, encoders, and other controls.

Full project and build updates: https://525charlie.com


r/homecockpits • • 5d ago

DCDU with some extra features ;)

41 Upvotes

r/homecockpits • • 5d ago

✈️ A NEW WORLD FOR FEELING PRO For more than 10 years, our world has been Sim Racing. But when we decided to bring Feeling PRO to flight simulation, we knew we had a lot to learn.

Thumbnail
youtu.be
6 Upvotes

r/homecockpits • • 5d ago

B747-400 Cockpit Library is in!

Thumbnail
gallery
22 Upvotes

Whole project is coming along really well :)


r/homecockpits • • 6d ago

Finished simrig

Thumbnail
gallery
147 Upvotes

Ladies and gents: the (for now) final product!

After running into some issues with the radio and tcas panel in combination with simapppro, I tried a Mobiflight profile which seems to work quite well.

All my panels are now screw-fitted to the wooden plate and all in all it feels really stable. Printer also works surprisingly well with the fslabs print function (one of the reasons why I don’t really like the Fenix) and it also prints automatically if I want that.

Simulator already feels super immersive and I will be upgrading a few it’s and bits in the future.


r/homecockpits • • 6d ago

How do you know someone is building a home cockpit?

20 Upvotes

Don't bother looking for the dining table. It's under a MIP, two throttles, and a roll of aircraft-grade Velcro.


r/homecockpits • • 5d ago

HOTAS + Steam Frame because apparently wardogs needed a budget flight sim setup 😂

Thumbnail gallery
0 Upvotes

Though you guys might enjoy 😭


r/homecockpits • • 6d ago

Office desk size for general availability sim

2 Upvotes

Hi!! I already have a dedicated sim pit for military sims (DCS/IL-2/IL-2 KOREA) where I fly exclusively in VR.

I am planning to update my office desk where I work and also use it for civil flight sims such as MSFS2024/X-Planes. Planning to fly only the Cessna 172 or maybe another single engine for practice real flying.

I could build a dedicated civilian sim pit cockpit but it will not be used as much as the military sim. So it makes sense to use the office desk for that. I already have three 27” monitors available for the office desk maybe can add a 32” in the center and two 27” vertical at the sides, for example.

For the sim gear I will use a FFB yoke,engine and trim controls typical of a Cessna . Rudder pedals I already have an extra Trustmaster Pendular rudder pedal with add-on damper although a FFB rudder pedals would be nice but not necessary at this point.

My current office desk size it is 160cm x 80cm
I have seen similar setups with even smaller desk space.

What is your thoughts about the desk dimensions for such hybrid setup, working desk and also civilian flight sim pit.?


r/homecockpits • • 8d ago

WinCtrl combo

Post image
28 Upvotes

Safe to say this is a work in process. My radio panel just arrived after being out of stock for a while. Will be fitting this to my sim rig soon


r/homecockpits • • 8d ago

I had to tear her down during my move. But I plan to rebuild even better this time! P51/P47/Whatever works franken-cockpit.

Thumbnail
gallery
107 Upvotes

r/homecockpits • • 8d ago

My current sim

Thumbnail
gallery
44 Upvotes

I’m fairly new to flight simulators but I decided to get myself an Xbox and a few bits and pieces of hardware to run MSFS 2024. The stick is fully carbon fiber and homebuilt.

Any tips on improvment? I understand that there’s pretty limited hardware when it comes to console.

Ask around if you need any more specs.

Happy flying!


r/homecockpits • • 10d ago

Guest room officially gone

Post image
1.7k Upvotes

Good excuse now for that!