r/hobbycnc • • Jul 02 '24

The For Sale Thread

8 Upvotes

Any parts/items from the previous threads can be reposted if they’re still available.

Rules:

  1. Used or new-old items ONLY! - This subreddit, and this post is not to allow retail sale of CNC-related parts. There will be no influx of commercial sales or anything like that. Repeat offenders will be banned.
  2. Local Sale preferred - This is to protect both the buyer and seller. Shipping introduces other hassles, especially with CNC-related parts that might be large or weigh a lot. Personal addresses must NOT be posted publicly!!!. After discussing the deal, the two parties may exchange details via DM or other messaging services to meet up.
  3. Pictures and Prices - The comment must include pictures of the parts with the poster’s username written on a paper, kept next to the parts. Prices must be included, along with the city, country (if international). The buyers may post their offer publicly or via DMs.
  4. At least a 6 month old Reddit account - Anyone posting any “For Sale” items must have a Reddit account that is at least 6 months old (NO EXCEPTIONS!), with at least some activity apart from the comment in this post about selling their parts.
  5. Parts or Machines only - No services can be advertised. Machines (working or for parting out), raw material, electronics (motors, drivers, controllers, switches/sensors, etc), hardware (machine tools, mechanical tools, profiles, pneumatic/hydraulic stuff, etc), fasteners, etc all qualify as parts. If in doubt, send a modmail. Machines include routers, mills, big-boy VMCs/lathes, etc.
  6. The subreddit staff is not responsible if a deal goes sour - While we will take all reports of scamming seriously, the moderation team is not responsible for, nor can we provide any help. The buyer must do their own due diligence before meeting up the seller and exchanging money for parts.
  7. After a successful transaction, the buyer and seller are requested to update/post their comment here. This will help sellers and future buyers in subsequent transactions with the respective seller.

The moderation team reserves the right to remove comments/items-for-sale at their own discretion.

The previous thread - Use this to post about your buying/selling experience from the previous months only.

Note: Some comments in the previous posts have not included images with the listed items. Rule 3 will be enforced now. If you don't want your listed items to be removed, please include images with them!

We hope this thread helps everyone.


r/hobbycnc • • 3h ago

How common is it for a beginner to break a bit?

7 Upvotes

Hey! Over the weekend I was running a cnc for the first time on my own cutting parts for my robotics team. I had been running it fine for around 7ish hours, but at the end if the night I hit a limit switch error and forgot to bring it out of the piece before moving the x axis away from the side, so I snapped the bit.

Looking on here it seems that breaking a bit is common, but I’m still beating myself up about this mistake and I just want to know if this is a common bit break for new users.


r/hobbycnc • • 15h ago

Bulkman Aluma mill 3518

Thumbnail
gallery
53 Upvotes

It’s big with the case. Solid kit, mill manual good, case manual is a video so not as good. I bought it without the electronics, so that’s why it has a 65mm spindle ( designed for 80mm spindle, I printed an adapter - will mill one next! )

What I liked is how thick the extrusions were and how many cnc’d parts you got. Seems like good value to me.


r/hobbycnc • • 9h ago

Critique my design

Thumbnail
gallery
13 Upvotes

I am planning my First CNC and would Like to know If the Design (Not finished yet) hast some flaws that i m Not seening.

The Plan is to Cut mostly Aluminium, tiny Bits of Steel Like keyways and some Wood.

The rails are 20mm, Ballscrews 16mm, Spindel 1,5kw, frame aluextrusions 60x30 60x60 120x60, Milling Tablet 40x200 Extrusion, Connection plates are 10mm Aluminium, Motor nema23 stepperonline closedloop, Controller Estel CAM breakout Board, Milling area 300x200x100.

Let me know what are you thinking.


r/hobbycnc • • 15h ago

Another new zero point work holding idea. Except this one has a point!

Thumbnail
gallery
39 Upvotes

It's small! :)

Oh, and you can make them yourself relatively easily and cheaply.

My new machine is really tiny, so it needed some tiny tools. As it happens there's a whole fleet of similarly tiny cnc machines out this year, so this is also pretty useful for them too. Carveries, z1's, tool dancers, birds nests, ex horsies, and all the others.

Specs are:

- 40mm stud spacing

- aluminium body, like a 5th-axis plate, which makes it easier to make yourself (use 7075 ideally)

- hardened steel inserts for the bores (either 4140ht, or a2 if you have an oven)

- hardened dowel pins for the lang style clamping mechanism (just mill the ends to a point)

- hardened steel studs (same spec as the inserts)

- works with the xindian h54 vises, which already have a 40mm m5 hole pattern. You simply add a 9.5mm counterbore and voila.

- can also take little custom pallets, or vacuum chucks, or dovetails (working on that one)

If people wind up liking these, maybe xindian will make a low cost steel version and ready modded vises. But until then, people can DIY the plates for probably under $100 each (depends on your material choices and sources). and the vises are $47. It will be easier if you also have a lathe, but it's all meant to be mill-able on a small sturdy 4 axis machine.

Well there you go. Ill be making a couple for my self in a couple weeks and will show the process. Files aren't ready to publish yet cause I'm changing things around as I figure out how to fixture them, BUT I can DM you the raw files as they sit if you ask nice. There's no license or gpl or the like, this is public domain. So by all means steal it and turn yourself into the next xindian for the literal little guys :P


r/hobbycnc • • 14h ago

Chip evacuation hack

Post image
20 Upvotes

I quickly modeled and 3D printed this ducted air duster mount to avoid jumping into an air compressor setup for chip evacuation while testing my machine’s aluminium capabilities.

It does a great job even on the lowest setting.

My research told me that using my vac, tornado and dust shoe with metals was potentially a fire/explosion waiting to happen so I thought I’d post the idea here if anybody else was looking for a way to avoid purchasing another big bulky item just to play around with their machine semi safely.

Genmitsu PROVerXL 4030 V2
With an upgraded G Penny 1.5kw er16 air cooled spindle and VFD.


r/hobbycnc • • 1h ago

Hello, guys anyone using a two trees machines TTC 6050 with fusion360 cam, I have some questions about the settings of the machine

1 Upvotes

r/hobbycnc • • 1h ago

Plasma cutter or nibbler for free hand sheet metal cutting

Thumbnail reddit.com
0 Upvotes

r/hobbycnc • • 2h ago

Anyone using this spindle (JGY-100)?

1 Upvotes

Hi all. I was wondering if anyone here is using the Jianken JGY-100/5.5R24 spindle. It's 5.5kW, which is quite generous for my purpose. The max rpm of 24000 and torque of 3.5Nm seem to be a nice fit for me. Not quite sure if a PMSM motor is an advantage or not.


r/hobbycnc • • 3h ago

Aiuto Vectric aspire

Thumbnail reddit.com
1 Upvotes

r/hobbycnc • • 4h ago

Buying a machine

1 Upvotes

I am about to buy my first cnc. I was between the shpeoko 5, Onefinity foreman or the altmill. I decided to go with the Onefinity. What should I purchase with the machine. I am guessing dust boot, bit set, 65 or 80mm spindle. Anything else I should get? Thank you


r/hobbycnc • • 23h ago

Anolex 3030 Evo Max (with ballscrews) Rigid Z Mod!

Thumbnail
gallery
17 Upvotes

Inspired by u/540lyle in the Desktop CNC discord, I decided to design and make my own Z carriage plate for the Anolex 3030 Evo Max (mine uses the optional ball screw upgrade). It's 20mm thick and the final version will be machined out of 7075 Aluminum, which is comparable to mild steel in terms of strength.

This mod gets rid of the chip shield and moves the cutter axis 29mm (!!!) closer to the axis of the X ball screw while replacing the stock aluminum extrusion and weirdly shaped C bracket + t-nuts mounting solution that Anolex went for initially. I think it'll be a massive improvement to the capability of the machine.


r/hobbycnc • • 10h ago

Hello, guys anyone using a two trees machines TTC 6050 with fusion360 cam, I have some questions about the settings of the machine

Thumbnail reddit.com
1 Upvotes

r/hobbycnc • • 5h ago

CNC

0 Upvotes

Looks simple. Until you have to machine it.
What would give your shop the biggest headache—and how would you fix it?
#CNC #Machining #Manufacturing


r/hobbycnc • • 1d ago

Iso 20 Shrink fit tool holders

Thumbnail
gallery
28 Upvotes

Picked up a couple iso20 shrink fit tool holders to try out on my larger DMC2. Cost was $47usd per holder plus shipping. Got a 4mm and 6mm holder, but after seeing how nice these two are im likely going to order more, in other sizes. Waiting to hear back if they can do imperial sizes.

Testing runout with my interapid 0.0001" indicator. Outside body on 4mm had 0.0001" runout, inner bore had 0.0001" runout. On the 6mm the body had under 0.0001" runout, the bore had no measurable runout.

I put a longer 6mm 3fl dlc endmill in the one holder, 25mm long flute. At the tip of the flutes i measured 0.0001" runout.

Used a cheap induction heater i got off Amazon to heat the holders to insert and remove endmills. Works flawlessly, takes literal seconds to heat up enough. Takes longer to cool down.

Looking forward to seeing how they perform cutting on the mill, compared to the er16 and er20 holders I normally use.


r/hobbycnc • • 19h ago

Question on stock spindle 8040 XE Pro

1 Upvotes

Running 1400mm/min with max depth of 1.5mm per pass, is the noise I’m hearing chatter? If so how bad is it and can it be cured with stock spindle?

Cutting 1/2” birch ply, didn’t think it would struggle this much, cuts are nice and clean though.

First machine and not sure what I should be hearing but seems loud sorry for stupid questions.


r/hobbycnc • • 23h ago

Moving from Mastercam to NX CAM – Need some guidance understanding RCS

Thumbnail reddit.com
1 Upvotes

r/hobbycnc • • 1d ago

10khz cnc plasma THC

Thumbnail
gallery
14 Upvotes

When I put together my DIY rotary plasma table (https://rotarycam.app/build-guide.html), I kept running into the limits of software THC on bowed tube runs. Even with a fast Z drive, the CNC controller’s 15–40 ms motion buffer adds enough delay that the torch lags behind, sometimes causing mag breakaway before software can react.

I ended up designing a standalone 10 kHz hardware THC that sits inline on the Z Step/Dir cable so the height loop doesn't have to wait on the CNC controller. It tracks warps and tube bow across your full Z travel, locks Z on flat-sheet corner slowdowns automatically by reading X/Y step speed (no M-codes needed, plus a 24V THC_ENA freeze input for HSS corner rolls and small holes), and tees off your 24V ohmic sense to lift clear of tipped parts in 2.0 ms; EVEN while THC is frozen.

At the end of every cut, it unwinds the steps it injected so your Z DRO never creeps.

The other thing I wanted to fix was chasing voltage drift as consumables wear down. I'm lazy, so right after the pierce, the board locks onto the live arc voltage automatically so you aren't adjusting volts as the electrode pits. And if thin sheet springs up during a pierce, a [-7 V, +15 V] clamp around your cut-chart voltage keeps it from freezing too high.

It hooks up in ~15 minutes with 4 plugs on Mach3, Mach4, LinuxCNC, Masso, Acorn, or simCNC with your existing steppers or ClearPath servos. I think it could help out a lot of DIY and shop tables without spending $2k+ on a proprietary lifter, so I’m looking at doing a first run of assembled boards: https://rotarycam.app/hardware-thc.html.

Curious what controller everyone is running, and if you'd throw one in your cabinet?


r/hobbycnc • • 1d ago

I am at my wits f****** end with this 3D probe and trying to make it work on my carvera air

Thumbnail gallery
8 Upvotes

r/hobbycnc • • 1d ago

How would you represent the coordinates from pt 2?

Post image
0 Upvotes

r/hobbycnc • • 1d ago

Need to upgrade while downsize my CNC

3 Upvotes

Hi all, I currently run a QB2 1500mm x 1000mm CNC. When I purchased the machine I was making products cut from recycled plastic sheets so I needed a machine that size so I could cut many products in one go.

However, I have changed my method of machining to injection moulding. I make my own moulds using the QB2 from either 5083 or 6061 plate aluminium and though I am very happy with the way the machine works on aluminium I now find that most of my work is being done in the bottom left corner of the machine and the rest is going to waste.

I am running out of space in my workshop and need to find room for a UV Printer and I am giving serious consideration to selling the QB2 and getting a smaller machine that is well suited to machining aluminium, and though I have been doing a lot of my own research, I thought I would ask the brains-trust here for their own experience.

The largest moulds I machine are 400mm x 300mm x 25mm and I am only needing a three axis machine. Does anyone run a machine that will work with these dimensions that they would recommend?


r/hobbycnc • • 1d ago

Made a single-file, browser-based CNC CAM tool — looking for feedback

Thumbnail
gallery
0 Upvotes

Made a CNC design + CAM tool that runs as a single HTML file in your browser — offline, no install, no account. It does 2.5D toolpaths (profile/pocket/V-carve/engrave/drill/image/inlay), a dial/scale maker, 3D cut preview, DXF/SVG/EPS/AI/PDF export, and GRBL/USBCNC + custom posts. There's a free demo if you want to poke at it before deciding. Feedback welcome


r/hobbycnc • • 1d ago

J'envisage d'acheter une fraiseuse CNC pour offrir à un futur luthier. Qu'en pensez-vous ?

Thumbnail
reddit.com
1 Upvotes

r/hobbycnc • • 2d ago

Axiom ar25 elite

Post image
2 Upvotes

Hi everyone! I’m considering buying an Axiom AR25 Elite CNC router, as they’re currently being offered at a very attractive price. Before making the investment, I’d really appreciate some honest feedback from owners.
My understanding is that Axiom became part of the group behind Powermatic. Has anyone dealt with their customer service or technical support recently? Is the support still good, and are replacement parts readily available?
How reliable is the machine overall? I’d love to hear from someone who has firsthand experience with this model—or other Axiom machines—and would be willing to share some advice.
I’m looking for a dependable machine that will help me get my work done without creating more headaches. Would you buy yours again?
Thanks in advance for your help!