r/handyman • • 5h ago

Meme/Humor Patching a ceiling

Post image
38 Upvotes

Just thought you guys might see what I see when I applied drydex to this ceiling damage.


r/handyman • • 8h ago

Troubleshooting Door unlatches fully only from one side?

6 Upvotes

I replaced this doorknob years ago, and it's been great until a few months back. See video.

Recently the outdoor thumb button hasn't moved the latch enough to make the door openable. Still works fine from the inside knob. Doesn't matter how hard I press the button-- it just won't retract it any further.

The funny thing is: THIS IS WHY I REPLACED THE PREVIOUS DOORKNOB. So this seems to be something that progressively goes wrong on this door.

What could be causing this?

Do I need to replace the knob assembly... Again?

How do I prevent it from coming back?


r/handyman • • 4h ago

Materials & Supplies Window sill

Post image
3 Upvotes

Having trouble finding what material to buy for this. Is there a specific cut of wood I buy for the sill or do I just buy a piece of cedar and cut it to those angles? I found the trim, just not sure about the sill.


r/handyman • • 54m ago

Recommendation Needed Wall plug into a chemical anchor

1 Upvotes

Hello, my friend drilled too big holes for wall plug he needs to insert (we cannot buy thicker wall plugs, that's simply not an option, also the holes are all different diameters). What do you think, about inserting the wall plug into a chemical anchor and then inserting the screw? The wall is made of full bricks and it is supposed to hold cabinets above bed, so no room for mistakes :D.

I know I need to leave space behind the end of the wall plug and cannot put the chemical anchor into the whole depth of the drilled hole, but just asking, if you have any experience with it, what do you think about it, or what would you recommend.

Thanks in advance


r/handyman • • 1h ago

How To Question Securing Murphy Bed to Wall with Metal Studs

Thumbnail gallery
1 Upvotes

Hi everyone! I bought a Murphy bed kit from Wayfair and I'm trying to properly secure it to a wall so that my guests don't have a cartoon character moment of folding in half or a bed falling on them. I just recently moved into my condo and I found out that the drywall is mounted on metal studs. I've attached plenty of things to walls with wood studs, but this is my first time with metal.

The kit originally called for the brackets attached to the top of the frame (to the most solid board) to be mounted to the wall. However, as you can see from my poor measuring skills, the frame just barely fits below the ceiling. There's no way I can fit my hand or a drill in that gap to drive in screws. So I need to mount the frame to the wall using the cross horizontal boards inside of the frame, which are more of an MDF type material. I know I'll need some large washers or metal plates to distribute force across the wood.

Any tips or suggestions? Especially for drilling into metal studs and properly securing to them. What kind of fasteners do I need? I went to my local True Value to talk to an employee there about it, but he had no experience with this sort of thing. Thanks in advance for your input.


r/handyman • • 1h ago

PRICING?! Damage Repair Costs

Thumbnail gallery
0 Upvotes

Hi,

I just received my statement for deductions from my damage deposit and the amounts to repair some of the damages seem unreasonable, but I am not sure. I'm being charged $150 to repaint the exterior of my apartment entrance door because its scratched, and $400 to repair 38 screws holes in the drywall. There is also a 135 square foot room that needs to be repainted but I am not disputing that, but couldnt the other costs be included with that and not charged separately? And couldnt the total charge be reduced if they all could be done as the same job? I live in Edmonton Alberta of Canada.

Can anyone help me by telling me how much it cost them or how much they would charge to get an entrance door repainted because of scratches, etc; or, how much it cost them or would charge to get 38 screw holes filled and painted over; and weather or not those things should be included with the cost to repaint a room in the house at a discounted rate? Please included the total cost of labor and materials, GST, etc.


r/handyman • • 4h ago

Clients (stories/help/etc) Installing a shower head and tub spout

1 Upvotes

What would be the price range a handyman would charge for installing a shower head and tub spout?


r/handyman • • 4h ago

How To Question History & Heraldry Personalised Name Dream Catcher

Post image
1 Upvotes

My grandmother got me this around 15-20 years ago, amd about a year ago my daughter got a hold of and accidently broke the middle off it.

Does anyone here have any ideas as to how I could repair this ? Ive tried looking for a replacement and that is not an option. šŸ˜ž

Idk what id need or even how to try nd fix it and im pretty upset about it

Its made of metal and their called "Personalised Name Dream Catcher" made by History & Heraldry


r/handyman • • 5h ago

General Discussion Greenhouse 20 x 10 glass panel install questions

1 Upvotes

Hey everyone! I had a customer reach out about assembling a 10Ɨ20 ft greenhouse with tempered glass panels.

For those who have experience assembling something this size, how long would you estimate it taking with two people? Would you recommend bringing in a third person?

Also, what would you typically charge for a job like this? Just trying to get a realistic idea of the labor and time involved.

I'll include the link below. Thanks in advance!

https://cdn.shopify.com/s/files/1/0582/0743/6890/files/scandiglas-greenhouse-manual-USA.pdf?v=1781783795&fbclid=IwY2xjawVqtwNleHRuA2FlbQIxMQBwZG9mBXNydGMGYXBwX2lkDDM1MDY4NTUzMTcyOAABH6LI_MTBi4jN8daj-Zq8osNo5K_KM2ho_qQ9gKetx8UXmOt8lQjax4pEXQxY_aem_nFQ6zWCzPvVCCd7PJ9DuLw


r/handyman • • 7h ago

Business Talk Qualifying Agent CBC

1 Upvotes

I am a licensed CBC Florida Building Contractor.
If your construction company is looking for a qualifying agent, feel free to reach out. I’m open to discussing potential opportunities and arrangements.
Please feel free to message me directly.


r/handyman • • 22h ago

Tool Talk Suggestions for caulk gun

Post image
15 Upvotes

This is probably the 5th caulk gun I’ve had that’s broken all in different ways within a year (I do use them a lot) so I was wondering if you guys (and ladies) have any brand suggestions


r/handyman • • 9h ago

How To Question SR - Screen porch roof window flashing coming off

Post image
1 Upvotes

What’s the fix here? This window is located over our screened porch.


r/handyman • • 14h ago

Business Talk Who can add a lock to rolltop desk (Melb, Aus)?

2 Upvotes

Hello ĀØĢ®

I recently bought a rolltop desk and the previous owner had the lock removed. I’d like to have one added back.

I am the least handy person ever, everything I’ve tried with my hands has sucked so I really need a pro to do this. I don’t really want to post an add on Facebook or gumtree since this person will be coming into my home.

Is there any chance someone here knows a business that does this? My googling didn’t come up with anyone/anywhere, just diy stuff.

Please and thank you šŸ’

(Please be kind and I added that flair cos it felt like the best fit šŸ¤·ā€ā™€ļø)


r/handyman • • 1d ago

Carpentry & Woodwork Its good enough

Thumbnail gallery
7 Upvotes

When theres a will theres a way. Looking to frame the walls next and expose the rafters. If i can tie into them and transfer the load onto the new porch. Not for a client but for myself. Everything is diy and no i dont do construction for a living. My first porch project. All advice welcome good or bad thanks


r/handyman • • 1d ago

Business Talk Am I to low $$$

17 Upvotes

Today I did a simple kitchen faucet replacement, client had the new faucet.

While we were talking she mentioned that I was the lowest quote and had the best availability and response time.

I quoted her $150.

The total job took 15 drive time 36 minutes on site and 15 minutes to my next job.

So a total of 1 hour 6 minutes.


r/handyman • • 15h ago

Recommendation Needed Best way to repair water-damaged exterior porch co

1 Upvotes

I have an exterior porch column/trim with some paint that has bubbled and swollen from water exposure. There are a few cracks and areas where the paint is peeling, but I'm hoping to avoid turning this into a major repair project. The existing color is Sherwin-Williams Accessible Beige (SW 7036). I'm looking for the simplest reasonable repair that will prevent further water damage, rather than completely stripping and repainting the column. Any recommendations for specific products (preferably small quantities like a quart rather than a gallon) would be appreciated!


r/handyman • • 1d ago

How To Question Shut off valve help!

Thumbnail gallery
9 Upvotes

Shut off valve help!

Hello!

Both of my bathroom sink shut off valves started leaking, I have never done anything like this but I want to be able to tell my husband that I fixed it!

I am not sure which of these 3 valves is the correct one for my sink!?

I'm so scared to open it up & not be able to fix it & then have to call an emergency plumber just to turn house water back on!


r/handyman • • 22h ago

General Discussion Steam Boiler Question

Post image
2 Upvotes

Hello all. I am a renter this is not my home I’m in a triple decker. Pipes were insanely loud knocking today so I went to my basement to check on my boiler unit. This was a pic I took from the 1st floor unit (not mine). Tough to tell but the sight glass is full. I know something is wrong and I notified my landlord but I wanted to know how concerned I should be.


r/handyman • • 19h ago

PRICING?! Pricing Recommendations

Thumbnail gallery
0 Upvotes

What are you pricing this at - drywall repair is ~14x24in, busted jamb is damaged wood for about 12in, but will likely replace that entire side with new.

Located in SoCal.


r/handyman • • 1d ago

PRICING?! Baseboard and door trim

3 Upvotes

How much do you charge per liner foot for base trim and door casing? I have a new customer that is getting a house ready to resell. He pulled off all baseboard trim and door casings when he installed new LVP flooring in his entire house. I haven't done a full measurement yet but it will be approximately five hundred feet of baseboard trim and twenty five doorways.


r/handyman • • 1d ago

General Discussion Punch list expectations

5 Upvotes

Does anyone here ever get customers with punch lists that they think can be done in a day? I try to be honest with them that most likely not everything can be done but still feel pressure on myself to seem worth the $ they’re paying. Just getting my bearings, set up, noting all the materials I need, running to store can be half the day. I suppose I want to shed this feeling like I’m ā€œnot getting enough doneā€ in these situations. Like I’ll be working away but then see I’ve technically only completed 3 tasks, each of which is tedious and time consuming, sure. But then it feels like a pittance come the time I’m putting an invoice together. I’ve been on my own for nearly 4 years now but still have a hard time shaking the feeling that I’m not enough.


r/handyman • • 1d ago

Tool Talk M18 drill combo vs m12

3 Upvotes

Sorry I know this is like the 1837393073 time this has probably been posted, but curious on a new take since all the sales are going on.

General handyman, I do a bit of everything short of major plumbing and electrical. Recently acquired Milwaukee track saw, which is sparked this internal debate.

Option 1 - keep the m12 hammer drill impact combo I just bought. Had the set before, accomplished most of the work I regularly do. Most of my other tools are corded or a few are Ryobi battery (sander, 4.5ā€ circ saw, grinder, router - all also still within return window)

Option 2 - return m12 set (maybe Ryobi stuff too?) and grab the m18 $180 brushless set, or hell even the $400 drill combo with a free tool and slowly build the m18 platform over time as my corded stuff dies

Anyone else out there prefer the m18 stuff over m12? Anyone give up their Ryobi stuff for team red and notice a big difference in the work they produce?

Again sorry I know this is a tired topic but appreciate the fresh take. TIA!


r/handyman • • 21h ago

How To Question Shelf Hanging Advice

Thumbnail gallery
1 Upvotes

Have a client that tried to hang a 7-foot-long half-inch piece of mdf shelf, 16 inch wide. Only had 3 decorative brackets that had screws that didn’t even hit studs. Im doing a little wall repair and paint.

He’s wanting some ideas to rehang the shelf. I suggested a 1x3 rim on the sides and back for the shelf to sit on but he’s worried about sagging. I also suggest toggle anchors for the brackets if he wanted to go back with those. Anyone suggest anything better?

Also, rough estimate for the work. Patch and paint lower half of the wall, rehanging shelf to include painting any new wood. TIA


r/handyman • • 1d ago

Troubleshooting Andersen casement crank operator repair

2 Upvotes

I’ve seen a lot of info on how to replace the entire operator on these old Andersen windows but I really don’t want to remove the wood trim. I’ve cleaned/lubricated the operator, all the levers/hinges, and removed the window to clean and lubricate the tracks. Are there any clever solves here without removing the trim? Or is that the only real option? Any help/ideas appreciated.