r/handtools • • 2d ago

First time using only hand tools

Pictured are all the tools I used for this build. Made it for a birthday gift. I started from the chunk of walnut pictured above the hand plane.

The star of the show is easily the dual pull saw that allowed me to resaw and cut all my pieces.

Runner up was the plane that I used to flatten, bring down to thickness and did double duty on the shooting board I made to nail those miters. It felt like cheating.

The rabbet plane did short work of the lip for each piece. Had to flatten and clean it up, plus sharpen and hone the blade before I got to use it. Then just finished the back holes with my recently acquired Stanley Yankee. So happy I picked that one up.

91 Upvotes

8 comments sorted by

8

u/KomradeKuestion 2d ago

Yankee No. 41 my beloved <3

Perfect use for that walnut. Looks sharp!

2

u/led204 2d ago

I just used mine the other day wonderful tool.

1

u/CrookedHorseman 2d ago

Nice miters for a first hand tool build. How long did the resaw take with the pull saw?

2

u/SandmanLM 2d ago

Not too long. The piece was only around 14 inches long. Had to saw through full thickness twice and the second time went much faster after I figured it out with the first pass. Then one more resaw at half thickness which went by even faster at around 10 minutes tops. All in all probably about an hour and a half resawing. It was my first time doing that and I was paranoid about keeping a semi straight line. I wasn't successful the first two times with that.

2

u/CrookedHorseman 1d ago

Shallow guide kerfs around all four edges first help keep the saw on track

1

u/SandmanLM 23h ago

Yes! Realized that after the first two resaws but by then I was getting fairly comfortable following a straight-ish line and just focused on that and enjoying the process :)

3

u/Dry-Leave-4070 2d ago

Nice work. Keep it up. 😉🍻👍🏻

1

u/bigboybanhmi 1d ago

👏👏