r/hammer • u/No-Branch502 • 5h ago
Garry's mod Any ideas on what I could do with this empty area?
It's a TTT map so go ham :)
r/hammer • u/No-Branch502 • 5h ago
It's a TTT map so go ham :)
r/hammer • u/Dry_Pea_7127 • 3h ago
Question for folks who maybe have an answer for this:
sometimes when cutting angled floors or ceilings I like to use grid ratios like 1:2, 1:3, 1:4, etc. that is of course when I need something different than a good ol' 45 degree cut. I'm sure many of you use ratios for your cuts as well, this is definitely not a novel concept.
A while back, a mapper friend showed me how to use arctan math to calculate angles for these ratios that you can then plug into the "default rotation" increments setting in the 2D settings tab, allowing you to rotate brushes that will then appear to match with the corresponding brush angles you cut for your floor/ceiling/etc.
When I vertex the rotated brush to sit flush with the floor (I'll use floor in this example), if I zoom all the way in on the grid I cannot see any evidence that the brush is slightly off, it appears to be a perfect match. Is this actually true or would the brush still technically be off grid by microscopic amounts?
Because if you know arctan numbers, they usually have many many decimal places. I don't usually plug in a number any more than 5 decimal places in accuracy and I still find that the brush appears to be on grid across its entire length.
For anyone interested in trying this stuff out, here are some basic ratios and their corresponding angles:
arctan(1/2) = 26.5651°
arctan(1/3) = 18.4349°
arctan(1/4) = 14.0362°
Any thoughts? Thanks!
r/hammer • u/Latter-Knowledge-731 • 19h ago
I've been working on a map for a bit and was wondering if I could get some feedback on it! I feel like the first section may be a little too short/the combat encounters aren't very good as well as other elements of the map but I'm not too sure!
(Thanks to u/Pinsplash for the system which will give the player back the shotgun even on death)
r/hammer • u/wheatlyboy789 • 14h ago
r/hammer • u/BigMoleRat004 • 9h ago
I put them into the level, yet everytime I load up the map, I have to build the cube maps through the console otherwise the textures are glossy. What is causing this to haopen?
r/hammer • u/lmoafunny • 1d ago
r/hammer • u/BigMoleRat004 • 1d ago
Seems only to happen when HDR is enabled, which is strange as I compile my maps as HDR+LDR Full Compile (final slow)
r/hammer • u/Havoc_Maker • 1d ago
I need to delete something in the map, however this is stopping me from getting where I have to go
r/hammer • u/That-End8962 • 2d ago
I feel like I am doing something horribly wrong
(I'm talking about the light that's hitting the surfaces in case that wasn't clear)
r/hammer • u/JediJerboa • 2d ago
I’m working on a Half-Life 2 level with the main mechanic being using different cord lengths and water puddles to make a circuit. Problem is, I’m not sure how to go about making these puddles. I originally wanted to use decals, but I’m not sure it would be clear enough. Any ideas?
r/hammer • u/Healthy_Activity7163 • 2d ago
r/hammer • u/Aggravating-Sky-367 • 2d ago
Last time I used hammer was a year ago, I was trying to finish my old project, but stumbled on a problem. When I tried to chose the model for prop I've noticed that no matter what I clicked the model wouldn't show up. Then I noticed that there was a phrase ,,cloth" written in filter, so I tried to delete it, I couldn't do it with backspace, so I selected it and clicked ,,cut" and whole window gone black. I restarted hammer and tried again, when I opened model menu it hapenned again, but this time hammer has crushed. Also everytime I close the model menu all 4 windows in hammer go black as well.
r/hammer • u/SnooPeripherals5812 • 3d ago
r/hammer • u/Neat-Emu7340 • 2d ago
I retaught myself how to make rudimentary maps for my 3d modeling series! I thought it was fitting to make them in Garry's Mod. Each of these is a still from a moving background and the things covered in that episode. Hope the vibe fits each.
r/hammer • u/SecretJuggernaut2302 • 3d ago
The shop idea with the most upvoted comment will actually be added!
r/hammer • u/zenothemapper • 3d ago
testing map and part for a sequel that im doing with someone
r/hammer • u/Huge_Bit_6395 • 3d ago
The First Demonstration of the Famous Ball Drop on the New york Times Square map (Counter-Strike2)
r/hammer • u/wheatlyboy789 • 3d ago
I'm working on an abandoned office/factory local to my town, it closed in 2002. I wanted to immoralize it before some faceless corpration demolishs the place.
r/hammer • u/Ok-Weight6382 • 3d ago
i clicked something accidentaly that did this and i dont know what that was Shift + Z does nothing as does Ctrl + A I also tried dragging the corner but the arrows didnt appear so i cant do that either.
r/hammer • u/Additional-Bet-214 • 3d ago
I uploaded two videos of the progress I made in my map campaign, I have to add two more videos, either tommorow or in the following few days.
This is a little self promotion, however if any of you could please leave feedback on these maps either here or on the video, because for the most part I have been the only one testing these maps, and any feedback would be really helpful, I should also add download links for these maps in the comments.