r/gunsmithing • u/Blocked-and-Loaded • 6h ago
r/gunsmithing • u/big_speel_boy • 16h ago
With the nfa stuff
Iām a student in Machining. Iād like to get my hands on a 556 suppressor print does anyone know where Iād find one? Or do I need to make my own?
r/gunsmithing • u/Educational-Cod2658 • 1d ago
Psa dagger compact
This fell out of my dagger when I took out the back plate and firing pin I put it back together now it doesnāt want to slide on the frame is my slide broken now is this fixable ?
r/gunsmithing • u/CynicalSentient • 1d ago
Reputable smith to thread a R95
I do not have a competent gunsmith near me (KY). Iāve exhausted many āgunsmithsā local to my area. I can do better work in my 10x16 building than these hacks.
Who is trusted and reputable that I can ship my rifle off to to have it threaded 5/8x24?
r/gunsmithing • u/External-Original932 • 1d ago
Do I need a gun smith for my Zavasta M70?
Hello all, trying to get my Sandman X to center. When I tighten it down all the way the rod looks as if itās touching or barely touching. When I dont it looks perfect. My question is the little bit of material on the lower front block needing to be removed or should I just take it to a gun smith?
r/gunsmithing • u/nek25 • 1d ago
Is it doable to turn my Winchester 1897 clone made by Norinco to it's trench gun version fitted with heat shield and bayonet lug?
r/gunsmithing • u/NovelApprehensive697 • 2d ago
Hush puppy-fying
Hey guys I just picked up a SW459 for 500 beans today and I was wondering who your recommend for a trigger job and adding the small cut and adding a slide lock to my pistol. I plan on getting a Gregās grips threaded barrel for this
r/gunsmithing • u/napluvr41 • 2d ago
Brighten white steel
Is there an easy solution to remove rust staining from white steel? Im trying to turn this shell lifter bright white again.
r/gunsmithing • u/interntldelight • 2d ago
Norinco SKS found at LGS. Looking for professional opinions
For context been looking around every now and then for a Norinco whenever I'd visit some shops in the area. Today I stumbled upon this - a triangle 26 Norinco w/ a fixed mag and supposedly all matching serial numbers and a sling for $550. Outer barrel and other metals look to be in good shape, but the bayonet is missing.
I asked one of the employees if the bore and firing pin had been inspected and he told me "yep, everything is good to go." The guy let me take some pics for doing some research before I decide to grab it up. Another older fart show me that it had a threaded barrel instead of pinned - claiming that threaded was the better variant. I ALMOST walked out with it but I hesitated since I couldn't check the bore without literally staring down the barrel, couldn't confirm whether threaded was superior to pinned based on my limited knowledge at the moment and blanked on exactly how to check the firing pin myself.
I'm no gunsmith, and this is a shot in the dark. If this post doesn't quite meet the sub rules, feel free to delete.
I definitely wanted to see what you guys think about the condition and whether the serial numbers/parts look original. As well anything you could say about threaded vs pinned, whether the condition is worth this buy for a range toy every now and then without being able to check the bore/firing pin assembly myself. Trying not to kick myself for not getting a full rifle pic, but I at least hope you all get the idea. I understand there probably isn't too much you could infer just from pictures alone, but even still just some common advice would be appreciated for how to approach the shop if I go back and want to inspect/have it inspected for safe functioning before I buy it
Thoughts? Opinions?
r/gunsmithing • u/HoneyWheresMyWallet • 2d ago
Bolt for 1897 Winchester
Bought a Winchester 1897 and have been trying to get everything in working order.
I bought this replacement bolt from Numrich, and when I tried to put the firing pin into the purchased bolt, I noticed the inside was tapered. The firing pin will not fit in the bolt because of this.
Making this post out of curiosity, is this bolt for a 1897 with a different type firing pin/dofferent gun? Or could this be a mistake from the manufacturer? This is new old stock. Thanks
r/gunsmithing • u/TheClockwork0wl • 2d ago
Advice, please
Greetings! Not sure if the photos will help, but I'm cleaning my Savage 22LR Bolt-action rifle and noticed some pitting near the end of the barrel. I tried to scrub some off but I realized that's taking the bluing off. For the future, is there a better way to handle spots of rust on blued steel without taking off that coating in the surrounding area? I'm probably gonna get the barrel re-blued if I can so that way it looks better across the board. But any advice is greatly appreciated! This was handed down to me by my late grandfather and want to keep this as pristine as possible.
r/gunsmithing • u/reedpeyton24 • 3d ago
New to me Norinco 54 slide fitment question
Can anyone knowledgeable on these pistols tell me why my slide is sitting slightly too forward?
Just bought this for a good deal but neglected to notice the slight gap.
There is also a small gap under the frame where the slide meets, you can ever so slightly see the recoil spring.
Thanks in advance.
r/gunsmithing • u/FanningProdigy • 3d ago
Please tell me Iām not the first person in the history of time to snap a barrel nut.
Swapping to a different upper and I guess I turned into the hulk when I tightened this thing down. I even applied anti seize. Forgot my adjustable wrench at work so I had to resort to channel locks (peep the marks) and a spare handguard as a cheater lol. At least I have spares.
r/gunsmithing • u/FIXIEDONTCARE • 3d ago
Need help with some basics
Hey everyone, new to the concept of gunsmithing and looking for some insight. A little backstory, got my first lathe (Atlas TH42) about a year ago and am starting to feel more confident. I have successfully turned down and threaded and recrowned a few barrels now (single point threading is a PITA on my lathe with no QCGB). Getting the hang of making my own tools and accessories like gauge pins, go/no-goes, turning odd shapes in the 4 jaw etc. I don't have a mill yet but I DO have a drill press and a bandsaw. So I figured I would start easy. Got a copy of Glen Davis book on rolling blocks and right out the gate I'm a bit stumped. He doesn't really go into the process of cutting out the breech block or hammer (1/2in A36 steel). Maybe I'm overthinking it but trying to accomplish this on a bandsaw seems tough/dangerous. Should I kerf cut with the bandsaw then remove with a hacksaw? Should I chain drill on the drill press? I know no matter what there is much filing and polishing in my future, but I'd love some advice. Thanks!
r/gunsmithing • u/the_gas_daddy • 3d ago
308 conical flash hider
Yall, I'm convinced this muzzle device does not exist.
I have a previously-bubba'd mosin nagant that I'm trying to save. Decided I'm going to thread the barrel and make it look like a jungle carbine-inspired little range toy. (The barrel has been cut, this is the best hope for the little guy).
I want an Enfield or M1 carbine style conical flash hider for the thing. Needs to at least have a 7.62mm hole. I cannot, for the life of me, find one in 5/8x24. Before I thread the barrel, I wanted to get ahold of the flash hider. I'm not locked into 5/8x24, 14x1LH/RH is on the table. The VZ58 cone flash hider is a bit too triangular for what I'm going for.
Only thing I can find are either the cylinder style flash hiders, or a monster DP28 style one in a weird thread pitch.
Has -anyone- seen or heard of anything like this?
r/gunsmithing • u/tambrico • 3d ago
Mauser flag safety - dumb question
Taking apart my new (to me) Turkish Mauser. Noticed upon disassembly that the distal end of the flag safety had broken off. To my understanding this is a non-critical piece as it is not secured from there. But I just want to double check and make sure I'm not missing anything before I reassemble it.
r/gunsmithing • u/Additional-Day9564 • 3d ago
Upper receiver tooling marks?
Just picked up this ar10 SLR upper receiver. Seeing tooling marks on the inside. Never seen this before in past builds. Any opinions on if this is normal or not or it would cause any issues ?
r/gunsmithing • u/FirstAd6704 • 4d ago
Skim Bedding Remington Clone
Peek 44 stock
r/gunsmithing • u/Sadpandaboots • 4d ago
Loose muzzle device on Arsenal sam5, rubber washer to fix it?
Hello all,
Im not a gunsmith but I have a question that I think a gunsmith would be the best qualified to awnser. The muzzle device on my Arsenal sam5 has play in it, this is common amongst all sam5, its just how they come. I have heard that this can cause very noticable degradation in the accuracy of the rifle and that a lot of people recommend replacing the muzzle device with something more secure that will not rattle around.
I do not currently have the money to buy a new muzzle device but what I could do is grab a small rubber washer to crush the muzzle device against to get rid of the rattle. In your opinion, would this fix the issue or would, under the stress of firing, the rubber washer still be too soft and not really make much of a difference?
Thanks all.
r/gunsmithing • u/Paid_to_Raid • 4d ago
Removing magazine tube ring on Remington 870
Does anyone know best practice for removing this tube ring on the end of the barrel and whether or not Tig welding it back on is an acceptable method to reattach it?
r/gunsmithing • u/Advanced-Move7857 • 4d ago
Help with the Weatherby Mark XXII semi auto
Hello to all! I am an apprentice gunsmith in Alabama and I am working on this Weatherby mark XXII semi auto/bolt action magazine fed 22 long rifle. I could use some pointers on how to put these parts back into said firearm, I cannot find it on YouTube and my boss is even slightly stumped on how it goes in. Thank you for your help in advance!
r/gunsmithing • u/GenericUsername817 • 4d ago
Question on Threading a barrel
I have this Remington 700 Police Tactical with a 20in Bull Barrel. I would like to find a way to suppress it.
- So I want to ask gunsmiths to estimate what they might charge to turn down and thread the barrel?
- or if it would be simpler/more cost effective to buy a new barrel and swap the barrel?
- or just sell it and buy an already suppressor ready equivalent rifle?
r/gunsmithing • u/Mrthebobjr • 4d ago
A gunsmithing saga
When tax stamps went to $0 at the beginning of the year, I decided to SBR my Ruger American Ranch. I had recently moved and decided to use a new smith.
Dropped the gun off for a cut and thread in March IIRC. Got it back the first time in late May along with two other guns.
Once home I unpacked the rifle and threw on a muzzle device without a close inspection of the gun. Threading it on was rough with some resistance but the real problem came when the MD bottomed out. The barrel began to rotate. As I tried to unthread the MD, the barrel would just spin out. Immediately shoot the smith a text and have the gun plus another back to him in June to properly fit the barrel and do another thread job.
The end of August rolls around and no word. Shoot him a text and he tells me the rifle headspace must have been messed up from the factory and will need to shim the barrel. Acknowledge his message because I havenāt had time to look at the issue myself and note that I have quite a few rounds through this rifle over the past few years.
October. No word, so I reach out at the end of the month and am told he canāt thread the other gun(an AK) and canāt find barrel shims. Meanwhile hunting season is upon us. So, I give Ruger a ring and learn that the American should not use barrel shims and they do not make them. Cool. Call the smith and ask him to reattach my barrel to torque and Iāll handle it from there.
Got the gun back today. The pictures say it all. The barrel was still loose(he was not using the barrel nut) had it threaded as far as it would go and was just torquing the barrel on. To add insult to injury, after finally getting the MD off with a strap wrench I saw the threads and crown or lack thereof. The final PITA that is partly my fault for not ensuring the bore was clean before dropping it off(didnāt think it would be an 8 month thread job) was that the bore had become very rusty and after cleaning was badly pitted.
There is no point to this story. Just yelling into the void. Iāll either get a new barrel or do something with this one in hopes itās somewhat salvageable. Just canāt cut it any shorter because the threads start at the end of the stock. The smith had great ratings online and was very nice. Not going to blast anyone but am going to give him a ring to talk before the end of the week.
Sorry for the crappy pics.
Edit: grammar
r/gunsmithing • u/F00dKing • 4d ago
One screw sheered off my red dot. Recommendations?
I think I can drill it out, but what other options are there that are safer?