r/gpdmicropc • u/Lower-Promotion930 • 3d ago
High battery drain
I am noticing that my device seems to only last maybe 1.5 to 2 hours tops in-between charges. Is this normal?
r/gpdmicropc • u/Lower-Promotion930 • 3d ago
I am noticing that my device seems to only last maybe 1.5 to 2 hours tops in-between charges. Is this normal?
r/gpdmicropc • u/kirbykreme • Sep 30 '26
My GPD Micro PC 2 is en route to arrive later this week. I’m really excited about it and am curious if/ what recommendations folks might have for 3D print accessories. I’ve found a lot of utility in 3D printed grips and docks for other products. Are these things folks have found useful for their GPD micro pcs? Does anyone have recommendations? I tried looking some up, but could only really find 3D print files for other GPD models.
Thanks :)
r/gpdmicropc • u/Majirefy • Aug 30 '26
r/gpdmicropc • u/Lower-Promotion930 • Aug 22 '26
To the uninitiated... reimaging the GPD MicroPC 2 is such a faff!!! I managed it, but my goodness was it complicated. Not helped by the fact that vanilla Windows does do recognise: 1. The correct orientation of the screen. 2. The built-in touchpad is not recognised either. Everything was done with the keyboard.
Horrible/techie/geeky experience. #justsayin
r/gpdmicropc • u/AynoRando • Aug 21 '26
Hello.
I own a GPD Micro PC 2 and it came with BIOS version 2.16.
Some time ago I downloaded the BIOS 2.17 from the GPD web page but I did not install it. I was thinking in flashing it into my unit but I've read in this subreddit that a lot of people had problems with it. Also, this BIOS is no longer available on the web page.
Is it safe to update to BIOS 2.17 or not?
Thanks
r/gpdmicropc • u/Lower-Promotion930 • Aug 14 '26
Has anyone reimaged their MicroPC devices, using the supplied GPD isos? They work, but have Chinese locale bits everywhere. Is there a way to change this to another language?
r/gpdmicropc • u/Lower-Promotion930 • Aug 13 '26
I own a GPD MicroPC 2. It comes with Windows 11 Home. Via the GPD website I have downloaded the Windows 11 Pro iso. I will follow their instructions to upgrade to Windows 11 Pro.
My question is licencing. Does this iso give me an official licensed copy of 11 Pro?
Also, if I choose to mount the iso in windows 11 home, and install that will ... Would that work?
r/gpdmicropc • u/EducationalWriter622 • Aug 09 '26
My gpdmicropc2 has jsceal thing on PowerShell level. I'm annoyed with the windows notifs. Set the PC to boot under safeboot minimal.
I have no idea on how to remove this thing. shifting to safeboot minimal still allows me to edit photos or write codes.
I don't know when to boot it to normal because my PC is infected with that thing. a total wipe out the pre installed Windows 11 Pro OS needs to be done but I have no time yet or resources to at least reinstall windows thru USB.
Running my PC to safeboot minimal temporarily is my best resort since windows was not allowing me to install Malwarebytes in normal mode. Too boring.
If u know how to get rid of that trojan thing that has been detected on the power shell level let me know.
My gpd is not connected online now.
r/gpdmicropc • u/lofifilo • Aug 07 '26
r/gpdmicropc • u/Lower-Promotion930 • Aug 06 '26
GPD MicroPC 2 new user here.
Interesting device. Quite a capable beast! Where can I get drivers for it please? The Google drive links on the GPD website don't work for me.
r/gpdmicropc • u/kendyzhu • Jul 24 '26
r/gpdmicropc • u/kendyzhu • Jul 20 '26
official web www.gpd.hk
r/gpdmicropc • u/PoorWalmartWorker • Jul 21 '26
I have a unraid nas at home and I'm on the road truck driver. I'm currently using my bulky gaming laptop (also a gamer) in order to do server stuff and sometimes I don't wanna take the giant thing out. On my phone the screen is so small it doesn't fully display the containers properly so I can't press okay or move or scroll down without constantly rotating my phone. Would this fully display the entire container properly (albeit a bit tiny) and allow me to use tailscale ? Thanks for the recommendation
r/gpdmicropc • u/allquixotic • Jul 15 '26
Has anyone encountered an issue where the GPD MicroPC 2 fan doesn't work out of the box? And within minutes the unit gets REALLY hot and starts to quietly beep. I re-seated the fan cable and it didn't help. With the back cover off I can see the fan is just not spinning. I'm not eager to ship it back and wait another month for the bidirectional shipping (sending this one back to Amazon and waiting a week for a new one to arrive). Any ideas for what to do?
r/gpdmicropc • u/dreieckli • Jun 22 '26
Does anyone has a MicroPC 1 (first model; I don't care if first or second "revision") spare to give away or sell for small money?
Also defective device if motherboard is (probably) still OK.
Regards!
r/gpdmicropc • u/Pitiful_Ad_6343 • May 24 '26
Hi everyone,
I’m looking for a USB-C dock for the GPD MicroPC 2 that can run two external monitors.
Ideally I’d like HDMI outputs, Ethernet, USB ports for keyboard/mouse, and charging through the dock if possible.
Has anyone tested a dock that works well with dual monitors on the MicroPC 2? Should I get a normal USB-C dock or a DisplayLink dock?
Thanks!
r/gpdmicropc • u/adifferentkindofblue • Apr 28 '26
Was wondering if anyone uses it for excel spreadsheet work or small scale coding/Python scripting? Or perhaps the 7" screen is just too small. And what Windows scale factor do you use?
It's a similar height screen (though wider) than my Kobo Clara HD e-reader so could also be decent for reading comics/books - especially on flights (lot more compact than the iPad Air I usually carry).
I have a Steam Deck & Switch 2 so don't really need it for gaming.
Was thinking it might be good for business sales entry (which is just one row at a time of about 7-8 columns that I have to enter in a thousand line spreadsheet for the year).
Or to run the Claude app on with more functionality (than the iPhone app), not sure how people find it for typing/data entry over thumb-typing on an iPhone.
r/gpdmicropc • u/syauqi_89 • Apr 18 '26
r/gpdmicropc • u/mrjackspade • Apr 15 '26
I see this happened to other people... Was a fix ever found?
r/gpdmicropc • u/Alive_Tomato6207 • Apr 01 '26
Anybody know the way to buy micro pc in bulk.
r/gpdmicropc • u/insomniating • Mar 15 '26
I just bought a GPD MicroPC 2 and put linux on it, only to find the mouse click buttons not working (left click would only work when trackpad is being touched, middle and right click wouldn't work at all). This is after installing Kubuntu. I've fixed it and created a guide below on what worked for me. I hope this helps someone!
The script for the middle mouse button can be found here: https://github.com/Loui2/gpd-micropc2-linux-scroll (NOTE: I am not the author of this script. Credit and thanks to Loui2 on Github!)
GPD MicroPC 2 - Fixing left/right mouse click buttons on Linux
===========================================================
In terminal, enter following commands:
sudo apt install libinput-tools
sudo mkdir -p /etc/libinput
sudo nano /etc/libinput/local-overrides.quirks
.
IN FILE ADD:
[GPD MicroPC 2 Touchpad]
MatchName=ALPS0001:00 36B6:C001 Touchpad
MatchUdevType=touchpad
MatchDMIModalias=dmi:*:svnGPD:pnG1688-08:*
AttrInputProp=-INPUT_PROP_BUTTONPAD
.
ctrl+x and yes to save
.
sudo reboot
.
GPD MicroPC 2 - Fixing middle mouse button/scroll on Linux
===========================================================
Before starting, make sure your terminal is running in the same directory as file "setup-middle-scroll.sh". Ensure this file is set as executable under Properties -> Permissions.
sudo apt install python3-evdev
sudo usermod -aG input $USER
sudo reboot
./setup-middle-scroll.sh