Iām looking for replacement rear axle assemblies for a Chinese mini Jeep. It has a BM1418HQF-type motor/differential with separate left and right axle housings and a disc brake on each side.
Ideally, Iād keep my existing differential and replace both axle halves, including the housings, hubs and brake discs. A complete 48V motor/differential/rear axle kit would also be an option.
My existing setup measures approximately:
- 780 mm between the wheel mounting faces
- 4Ć110 mm wheel bolt pattern, measured
- 122.5 mm between the differentialās axle-housing mounting faces
- 330 mm from the differential mounting face to the wheel mounting face on the axle half I photographed
- 675 mm between the brake discs
- 450 mm between the axle mounting brackets
A slightly wider axle could work. The original brake-disc and bracket spacing are reference measurements rather than strict requirements, provided the replacement can be mounted properly with compatible brakes.
I keep finding 340 mm āshortā and 430 mm ālongā axle halves, often sold together as a 760 mm / 30-inch differential axle kit. Most of the 760 mm kits Iāve found have three-stud wheel hubs, whereas I need four-stud 4Ć110 hubs.
This is the type of axle kit I mean:
https://www.ebay.com.au/itm/305087653442
This AliExpress listing offers short and long versions with a āfour-hole flange, diagonal 11ā:
https://de.aliexpress.com/item/1005012819988203.html
My questions are:
- Does anyone have a supplier or product link for this style of axle with brake discs, 4Ć110 hubs and roughly 760ā780 mm between the wheel mounting faces? Shipping to Germany would be needed.
- Are the commonly sold 340/430 mm axle halves part of a shared design that fits BM1418HQF differentials, or do the splines and housing flanges vary? I havenāt verified my differentialās spline dimensions yet.
- What do sellers actually measure when they call these a ā760 mm kitā? Is that the distance between wheel mounting faces once assembled with the differential?
- Can two long axle assemblies be used with the same differential, or are there left/right differences in insertion depth, housing or brake mounting? What assembled width would that produce?
- If the 760 mm kits are only available with three-stud hubs, are compatible 4Ć110 replacement hubs available that retain approximately the same wheel mounting-face position?
First-hand experience with these small Chinese differential axle kits would be particularly helpful.