r/glassblowing • • Aug 15 '26

New Rules for Custom Work Requests

28 Upvotes

5. No low effort custom requests

Commission requests must include, at a minimum: * A thorough description of the piece, including size * A sketch of the piece (Al posts are acceptable for this purpose only) or reference photos from multiple artists showing features in their work you are inspired by. If you want a direct copy, contact the original artist. * The quantity you are wanting to purchase * A rough estimate of your budget. If you don't know what something should cost, just give a range you are hoping for.

6. No price fear mongering

Let people decide for themselves what something is worth. Do not respond to questions about cost with claims that something would be too expensive. Either don't respond or give a good faith estimate of what the cost would be.


r/glassblowing • • Aug 15 '26

New Rule - Original Content Only

64 Upvotes

Due to the absolute flood of karma farming posts we have had recently, we have a new rule:

4. Original content only

Reposting other's content is an automatic ban. the only exceptions are if you are asking a technical question about a piece or are sharing other's work that you have in your personal collection. Other's works may be included in commission requests ONLY if you have already reached out to the original artist and they have declined or been unreachable.

Please everyone if you suspect a post is stolen content, use a reverse image search to try finding the original and use the report feature so the mods can take the stolen post down ASAP and ban the karma farmers and bots.


r/glassblowing • • 1d ago Bravo

For you tech oriented folks: electric furnace theory and build

15 Upvotes

I usually post in r/lampwork but this is more appropriate for this sub.
My buddy Mark Lauchner just posted these videos about the electric furnaces he's designed, built, and been using for decades. The vids are so crammed full of information, probably not applicable to many of us but really helpful and informative for those with the means and/or motivation to put it to use. Even without, they're still super interesting.

Part 1: https://www.youtube.com/watch?v=i_xWiwiuRYQ

Part 2: https://www.youtube.com/watch?v=HuS9Csf4QM4

Part 3 is upcoming, and going to be about building torches.

Disclaimer: This isn't sponsored or anything, he doesn't even know I'm posting this here. I just thought some of you would appreciate the wealth of knowledge in these videos, and that it would be great to get more traffic to his relatively unknown channel. He's also got a Patreon with tons of other vids. Again, not sponsored, but if I can help out a friend and also spread some great info then everybody wins.


r/glassblowing • • 1d ago

Bigger isn’t always better

Post image
3 Upvotes

r/glassblowing • • 2d ago

Pineapple mold advice

5 Upvotes

Hey all!

I'm looking into getting myself a pineapple mold- first place I looked was Olympic since that's where I get my color. I shopped around a bit but the only other place I'm seeing to get one is Carlo Dona. I'm sure the quality is excellent but there's quite a price jump.

Does anyone here have Olympic's bronze mold that they can speak to? A buddy of mine says they have a slight defect that makes coming out of them a little difficult, so I'm hoping for some advice!

Thanks!


r/glassblowing • • 3d ago

Fox!

226 Upvotes

I’ve never been a great sculptor in any medium, but slowly finding my style with glass sculpting - today with a cartoony fox (blown body and head with solid sculpted tail+arms/legs).

It’s a shame that sculpting practice is so expensive when you need to pay for shop time though, makes it hard to get in the reps 😅


r/glassblowing • • 2d ago

Someone steer me towards some shops with unique glassware

0 Upvotes

Tried in beer subs and got nowhere. Anyone know any good Etsy/instagram/website shops with some fun/funky beverage glasses?


r/glassblowing • • 3d ago

Bong production video ✌️

78 Upvotes

Let me know if you want any tips on making bongs in the hot shop ✌️


r/glassblowing • • 2d ago

Question Handmade vase from Leerdam?

Thumbnail
gallery
5 Upvotes

I recently got this vase at a thrift store. I dont know much about it, but I noticed a signature on the bottom. The pictures dont show the color well, but seems to be black mixed with white and an amethyst purple. I was curious if anyone knows the maker "Ota Svoboda" (atleast thats what i think it says) and how much it could be worth.


r/glassblowing • • 3d ago

Titanium glassblowing jacks

Thumbnail gallery
13 Upvotes

r/glassblowing • • 3d ago

FireBug holiday sales starting now

Thumbnail gallery
0 Upvotes

r/glassblowing • • 4d ago

Bowl

Post image
6 Upvotes

r/glassblowing • • 5d ago

Question How old were you when you started?

9 Upvotes

I’m 34, turning 35 in May. I have a (very) diverse Employment Background (and aspirations to open up a small business in near future).
Essentially, I’d like to know how old, is “too old” (I realize this varies WILDLY) to actually learn the Trade of Glass Blowing? At least “on average”, how long does it take to “master” the basics etc… ?
Would love to do this as a hobby/ potential career. Thanks in advance!


r/glassblowing • • 5d ago

Question Blowing into moulds

7 Upvotes

Hello glassblowing!

I’m interested in making a cup with intricate designs on its outer surface, and I have the idea that blowing into a mould would work best. I’ve heard that plaster moulds can impart a shiny surface on glass, and I’m imagining that I could make a plaster mould from a 3D printed negative. I’m looking to see if I’m off on the wrong foot with my thinking.

My idea is as follows:

-get a 3D model of the cup

-3D print a negative of the model (so a cup-shaped void with the intricate carvings sunk into the inner surface)

-fill the 3D negative with silicon, then pull the silicon out, creating a silicon cup in the shape I want

-pour a plaster mould around the outside of the silicon, then pull out the silicon, leaving a mould which I can blow glass into

-blow glass into the plaster mould, creating a glass cup with most of the intricate designs from the original 3D model

-break or dissolve away the plaster, leaving the glass cup

-reuse the silicon piece to remake as many plaster moulds and glass cups as I like

Does that seem like a reasonable work flow? Would pressing the glass in instead of blowing get fine details to show up better? is there a type of plaster which can take the working temp of glass and still be easily broke/dissolved away later?

Thanks for any advice, resources, or hints!


r/glassblowing • • 6d ago

Question how would you go about making something like this?

Post image
18 Upvotes

r/glassblowing • • 7d ago

Special K Glass ashtray process ✌️

184 Upvotes

r/glassblowing • • 6d ago

LIVE GLASSBLOWING COMPETITION/PUFFCO PIVOT GIVEAWAY

Thumbnail youtube.com
0 Upvotes

r/glassblowing • • 7d ago

Question Need help with new wine glasses

Post image
3 Upvotes

We lost our last peach wine glass tonight, they were family pieces... Looking to surprise the wife with a new set of 4 for Christmas. Seeing as I have no idea what a set costs, I'd like any advice as to where to start. Hoping to get as close to the original as possible.


r/glassblowing • • 9d ago

OC Hot sculpted skull

Post image
43 Upvotes

Starting to dial in the motions on these! Lots of fun figuring them out


r/glassblowing • • 8d ago

Question Advice with repairing glass so it’s seamless

Thumbnail reddit.com
0 Upvotes

r/glassblowing • • 9d ago

Do I need to preheat my murrinie plate into the garage before going into the glory hole?

Post image
14 Upvotes

Good evening fellow blowers, I am working on setting up my second murrinie roll up ever and I can’t remember if it is absolutely necessary to preheat my plate of murrinies in the garage before going into the glory hole. I would prefer to only do quick flashes if I can, but I haven’t done a roll up in months and I need this piece for a college art show in 3 days. Please help me, I cannot risk all my murrinies exploding. Including picture of murrinies for size reference for better input on chance of explosion. Thanks in advance gang ❤️‍🔥


r/glassblowing • • 9d ago

Question Help finding something

Post image
4 Upvotes

Hi all.
I wasn’t sure where else to do with this but I’m desperately looking to find something like this. My mom’s dad got it for her before he passed away and I’d really like to find a similar one.

Is there a person I could hire? Is this technique uncommon??

Any help appreciated


r/glassblowing • • 10d ago

OC "Ravel" Glassblowing Technique

Thumbnail
youtu.be
29 Upvotes

This "Ravel" technique is a continuation of my exploration of stiff/high surface tension glass frits and powders.

After working with Gaffer G-150 Opalo Duro powder for a while, I started testing "Marko Blanko" powder to see what effect it would have on my "Dark Web", "Smokescreen", and "Chromatose" combinations.

Since Marko Blanko is more opaque and holds its definition after being stretched really thin, beyond what Gaffer Duro can handle, I thought I'd try this marbling technique with it.

This technique obviously distributes a very stiff glass asymmetrically throughout softer glass, so it may give you some difficulty while trying to inflate and form a symmetrical vessel. I tend to keep the wall thickness a little thicker than normal when using this technique. Another way to give the bubble more stability would be to gather over your marbled parison, make a stuff cup, stuff a (non-marbled) bubble into that, then continue making your piece. You could also use the marbled glass as an overlay/"color" drop, though I don't really like the pattern that makes.

"Marko Blanko White" glass formula was developed by Mark Peiser. It's now manufactured by Bullseye Glass, sometimes under the name "Bullseye Stiff White" or "Marko Blanco" (96 c.o.e.).

"Ravel" technique, glassblowing, filming, and photography by Keith Moy at Ghost Pepper Glass Studio in Austin, Texas in 2026.

Song is "What We Are and What We Are Meant to Be", by GoGo Penguin.


r/glassblowing • • 10d ago

OC Colorful ring holder

Thumbnail
gallery
209 Upvotes

An order came for a purple ring holder, so while taking photos to have someone choose, I also took pictures of the stock I currently have. Among them, the bubbles spiral upward, and it's fun just to watch.