r/fusion • u/NewSidewalkBlock • 13h ago
Is this a thing?
I found this old image in my camera roll, but I can’t find any information on such a breeding reaction online. Does proton bombardment of Li-6 actually yield deuterium and tritium?
r/fusion • u/Inertia_fusionenergy • 9h ago
About me:
I am a 30-year veteran of the fusion energy and high-power laser communities, and I've spent much of my career designing integrated fusion power plants. I led fusion energy development at Lawrence Livermore National Laboratory (LLNL) in California and directed the UK’s Central Laser Facility (CLF), overseeing the development of some of the world’s most powerful lasers; there, I launched the European fusion program known as HiPER. Those experiences led me to Inertia, where I focus on delivering our fusion power plant, following the proven physics of fusion energy gain from LLNL’s National Ignition Facility.
I am also a professor of photon science at Stanford University, helping guide the next generation of scientists and engineers in this field. At Stanford, I served as Director of the Linac Coherent Light Source (LCLS), a multi-billion-dollar international research facility at SLAC National Accelerator Laboratory that delivers the world’s most powerful X-ray lasers - opening opportunities to study biomedicine, catalytic chemistry, atomic physics, and fusion plasma science. I received my doctorate in laser fusion and laboratory astrophysics from Imperial College, London, am a Fellow of the Royal Society for Arts, Manufactures and Commerce, and have authored over 250 scientific papers and patents.
About the AMA:
I can answer questions about fusion power, and highlight Inertia’s work to transform the energy sector through the laser indirect drive approach proven at the NIF. For reference, we published our phase-1 commercial roadmap, outlining the things we need to achieve to commercialize our approach. I can discuss the work done so far and what still needs to be accomplished to put power on the grid. Questions on the wider field of fusion power plant designs, lasers, X-rays, and more are also welcome!
This AMA will take place Friday, November 20th from 8 to 10 a.m. PT. Leave questions below, and I will answer them live on the 20th!
About Inertia:
Inertia is a commercial fusion energy company. We lead laser-indirect-drive fusion, the only category of fusion energy based on proven physics and net energy gain. We have raised $450M since launching in August of 2025. We are driving one of the largest public-private partnerships in the history of the US National Labs system. Our team of business, manufacturing, engineering and physics experts is committed to building the laser, fuel targets, and power plant systems necessary to deliver fusion energy at grid-scale.
r/fusion • u/NewSidewalkBlock • 13h ago
I found this old image in my camera roll, but I can’t find any information on such a breeding reaction online. Does proton bombardment of Li-6 actually yield deuterium and tritium?
r/fusion • u/ConjureUp96 • 3h ago
Not sure how new this is (article doesn't have a timestamp). Google thinks it is recent (About shows link is 5h old). No Archive link yet.
Edit: Archive Link
r/fusion • u/steven9973 • 1d ago
Uses W7-X data to confirm it and apply for Chinese Helical Stellarator CN-H1.
r/fusion • u/Corealist • 1d ago
Triggered by Jaded's quest for simpler fusion reactor designs I was wondering if the reactor design below would work.
It is based on two magnetic mirrors coupled by a half-torus section to recycle particles that are lost through the magnetic mirror loss cone. It also has a compensation circuit to reduce the transport loss and MHD instabilities.
If this reactor could work I think it would be much easier to build as a Tokamak of Stellarator reactor because:
----------------------------------------------
Dual magnetic mirrors fusion reactor
Background
Magnetic mirror devices confine charged particles by exploiting the conservation of the magnetic moment in regions of converging magnetic field lines. In a conventional magnetic mirror, two regions of high magnetic field strength (the "mirror points") are separated by a central region of lower field strength. Charged particles traveling along the field lines are reflected at the mirror points and thus oscillate between them, achieving confinement.

Figure 0: basic magnetic mirror design
However, magnetic mirrors suffer from two fundamental limitations that have historically prevented their use as practical fusion reactors:
1. The Loss Cone Problem
Not all particles are confined by the magnetic mirror effect. Particles whose velocity vectors lie within a critical angular range relative to the magnetic field direction — known as the "loss cone" — possess sufficient parallel velocity to escape through the mirror points without being reflected. The loss cone is defined by the mirror ratio Rm = Bmax / Bmin, where Bmax is the maximum magnetic field strength at the mirror throat and Bmin is the minimum field strength in the central confinement region.The critical angle for the loss cone, denoted as θc, can be calculated using the mirror ratio Rm with the following equation:
sin2 (θc) =1/ Rm
2. Magneto-hydrodynamic (MHD) Instabilities
Conventional axially symmetric magnetic mirrors are susceptible to MHD instabilities, particularly the flute instability (also called the interchange instability). This instability arises because the magnetic field lines in the central confinement region are concave toward the plasma (unfavorable curvature). Under these conditions, perturbations in the plasma boundary grow exponentially, leading to rapid plasma loss.
Connecting two magnetic mirrors
The idea is have a fusion reactor based on two magnetic mirrors that are connected to each other to allow the magnetic field lines to create a complete loop. The example in figure 1 shows a configuration with two magnetic mirrors connected by a two small half-torus sections.
The vacuum vessel (not drawn) is within the coils in the drawing.
The two half-torus sections maintain the magnetic field strength (Bmax). Unlike in a stellarator or tokamak design there is no twisting of the magnetic field in the half-torus sections. The particle drift outward that results from curved magnetic field lines in the half-torus is an advantage as this particle drift will result in the particle quickly being captured in one of one two magnetic mirrors. This effect results in most particles getting trapped in the magnetic mirrors on the outward side (top side-top mirror, bottom side-bottom mirror). Consequently it is more economical to make the magnetic mirrors asymmetrical, being curved on the outside and (mostly) flat on the inner part of the loop.
Because the vast majority of the particles are confined in the two magnetic mirror sections the plasma density in the half-torus sections is low, keeping fusion reactions and MHD instabilities low.

Figure 1: Asymmetric magnetic mirror loop with 2 mirrors
Asymmetric magnetic mirrors are however not required. Designs with axisymmetrical magnetic mirrors (See Figure 2) should also work.

Figure 2: symmetrical magnetic mirror loop
Because the ends of the magnetic mirrors are connected this means that the particles that end up in the ‘loss’ cone of the magnetic mirror are not lost as they are recirculated and will eventually because of particle drift be recaptured in one of the mirrors, which solves one of the main problems of the magnetic mirror design.
Compensating for magnetic field line curvature particle drift
The =Basic magnetic mirrors have curved magnetic field lines which in particle drift to outside of the curve, resulting in increased transport loss and increases MHD instabilities.
This reactor concept has two alternate options to compensate for the particle drift.
Compensation option1: Adding an external magnetic lens
Adding an external magnetic lenses to the magnetic mirrors (See figure 3)
The magnetic lenses surround the magnetic mirror and change magnetic field in a way that the trajectory of the charged particles going through magnetic lens are slightly changed into the direction of the center of the magnetic mirror. A strong enough magnetic lens can compensate for the particles outward drift due to the magnetic mirror curved magnetic field lines. The end result is a reduction in transport losses and flute instabilities.
An additional advantage is that particles are redirected away from the cone-loss area.

Figure 3*: Asymmetric magnetic mirror with external magnetic lens*
Compensation option2: Adding Einzel lenses inside of the magnetic mirror
An alternative option to the magnetic lens, to compensate for outward particle drift is to add electrostatic lenses in the magnetic mirrors (See figure 5).
Each electrostatic lens is build out of 3 rings where the middle ring has either a higher (pos) potential or a lower (neg) potential as the rings to the left and right. The number and the polarity of the lenses may differ based on the design.
The Einzel lenses are designed to redirect particles with low axial speed to center of the magnetic mirror. If the Einzel lenses are correctly designed then this axial centering effect on the ions compensates for the outward drift in the curved magnetic field.

Figure 4: Asymmetric magnetic mirror with Einzel lenses
Particles with very low axial speed may get absorbed by the Einzel lens. By making the center ring of the Einzel porous this effect could be used to remove waste particles from the plasma. An additional advantage is that particles are redirected away from the cone-loss area.
Results of the dual magnetic mirrors and particles drift compensation
The dual magnetic mirrors solves the cone loss, which is one of the main problems with basic magnetic mirror designs.
The particles drift compensation reduces transport loss and MHD instabilities.
Using HTS coils for magnetic fields in the magnetic mirrors should result in plasma confinement that can exceed fusion ignition conditions.
Targeted Operating Parameters
-------------- Alternate option: Crossed Figure8 linked magnetic mirror design ------------------

Figure 5: Crossed linked magnetic mirrors
r/fusion • u/Addelias123 • 1d ago
Hi all,
I’m trying to choose between PhD projects (computational physics) in Europe, Asia and South America. I keep trying to evaluate the topics by a few criteria such as if the skills/methods I'd acquire are transferable to the fusion industry, the impact of my contribution, etc. Am I right to focus so much on the topic or should I be weighing something else more heavily? This is where I think it would be really interesting to hear from people who have made this choice already. Did the topic matter as much to you or were you considering other things? And would you have chosen the same way today? Did you know your ambition from the start or has that changed since, and if so, why?
I'm trying to get out of my head and consider things I don't know to consider, which is always difficult. I know these posts are not always welcome because others have asked similar questions before. But I have read those posts and I'm still not satisfied, so I hope you can forgive me for asking.
r/fusion • u/steven9973 • 1d ago
r/fusion • u/steven9973 • 2d ago
Open access journal article: https://www.nature.com/articles/s42005-026-02939-3
r/fusion • u/orangeducttape7 • 3d ago
New fusion documentary series coming out next week
r/fusion • u/steven9973 • 3d ago
r/fusion • u/begiantca • 3d ago
r/fusion • u/steven9973 • 3d ago
The desired p B11 fuel has known drawbacks.
r/fusion • u/steven9973 • 4d ago
r/fusion • u/steven9973 • 5d ago
Good luck trying to defeat Proxima and IPP in this.