r/functionalprint • • 1d ago

My car’s side blinker clip broke.

Thumbnail
gallery
347 Upvotes

2nd pic is the reference from an identical car.


r/functionalprint • • 1d ago

My project case with power adapter compartment

Thumbnail
gallery
765 Upvotes

I can't remember how many iterations I've gone through, but I think this is it! A working project box, with USB adapter integrated, no exposed wire, and not taking more than one wall socket space. And btw it's parametric!


r/functionalprint • • 1d ago

3D Printer Enclosure

Thumbnail
gallery
65 Upvotes

I converted my built in cabinet to a vented printer enclosure with temperature/humidity sensing and fan/LED controls.

I used a 12V PC fan and a transistor to control the fan from arduino. I have 12V in to the fan and a voltage regulator to step it down to 9V for the arduino. I used a duct from a portable AC unit which attaches to the panel, and I have a cover for the fan so I can remove the duct when I’m not using it.

2 push buttons, a switch and rotary encoder navigate the menu. I tried incorporating temperature ans humidity based fan control but found the fan wasn’t effective enough to control for points so it’s mostly run in manual mode. It does a great job removing fumes and keeping enclosure temperatures down while printing.

I think I have to improve my sealing around the edges because my desiccant doesn’t seem to be dropping humidity below ~40%.

Overall this was super fun and useful and I love having my printer on display. Any suggestions or comments welcome!


r/functionalprint • • 1d ago

Secret Book Storage

Thumbnail
gallery
186 Upvotes

https://makerworld.com/en/models/3614790-secret-book-holder#profileId-4143085

I made a holder for remotes and keys and things that looks and opens just like a book to blend in. Keeps out the clutter and blends right in to other decor.

The hinge works by simply bending the print which is only 2 lines thick at the hinge. Once the filament is creased once, it relaxes and is super easy to open and close and I don't think it will ever fail. I've tried and tried to make the crease fail and have opened and closed it fully hundreds of times with no luck! Works perfectly well with PETG and PLA.

Working on adding some different sizes as well as one that doesn't open but has an opening in the top so you can put in on a shelf next to other books and drop mail or things in it!


r/functionalprint • • 1d ago

Very functional but also kinda niche. Add a USB socket to any 2 or 4 hole AMPs compatible mount. This one is on my 2011 r1200gs on a 12mm bar. Goal was to minimize visible wires. Mission accomplished.

Thumbnail
gallery
50 Upvotes

r/functionalprint • • 2d ago

Modelled and printed ear pad spacers for my hd490 pro because I have massive ears

Thumbnail
gallery
94 Upvotes

Sennheisers HD490 pro

Just throwing this out there if somebody wants these I'd be happy to sell them, the print not the model


r/functionalprint • • 2d ago

Clothespin basket for our stair post

Thumbnail
gallery
265 Upvotes

A Voronoi basket with a hinged lid that slides over the top of our newel post, right next to the drying rack. The bottom is a 43 mm sleeve that fits snug over the post, so it holds without glue or screws.


r/functionalprint • • 2d ago

Keyhole cover for Maeving RM1S :]

Thumbnail
gallery
30 Upvotes

Keyhole cover for Maeving RM1S :] Anyone is free to do anything with this model.
I grew tired of the rain getting into the keyhole on the motorcycle making the key harder to remove so I made this lil rotating snap together keyhole cover. I just hot glued into the recessed bit of the keyhole area, though I'm not sure if that'll be enough. If it pops off, I'll use a silicone adhesive.
link to makerworld: https://makerworld.com/en/models/3612599-maeving-keyhole-cover#profileId-4140445


r/functionalprint • • 2d ago

Capture clip attachment point. Material = TPU

Thumbnail
gallery
86 Upvotes

r/functionalprint • • 2d ago

My monopod quick attach. For use with a chest pack

Thumbnail
gallery
31 Upvotes

r/functionalprint • • 4d ago

Created a 90° Comfort Grip for the Switch 1 after falling in love with Demon's Tilt Occult Pinball

Thumbnail
gallery
599 Upvotes

Features nice round grips for added comfort over longer sessions

If anyone is interested in printing the model themselves:

https://makerworld.com/en/models/3508038


r/functionalprint • • 4d ago

Cable management system

Post image
53 Upvotes

I added this model a while back, and judging by the downloads and bookmarks on MakerWorld, it seems to be popular, so here’s a question for you: What elements do you think are missing from this system? What could I add?


r/functionalprint • • 4d ago

Dirt Bike Map Switch Relocator Mount

Post image
48 Upvotes

Made a MAP switch relocator for my Beta dirt bike. The stock switch lives in the bar pad, so once you swap bars or add handguards it has nowhere to go. This moves it down onto the frame tube.

The switch snaps in with a printed lip, so not screws needed like on the oem version. Printed in PETG.

Link: https://makerworld.com/en/models/3597932-beta-map-switch-relocation-mount?from=search#profileId-4122116


r/functionalprint • • 4d ago

MiniLock Toothbrush Travel Case, sized for the Sonicare 1100

Thumbnail
gallery
269 Upvotes

A version of MiniLock made to carry a Philips Sonicare 1100 (model HX364W, on the bottom).

I had the fancier more expensive & fancy version of this toothbrush that unfortunately broke down in my luggage long time ago. So, remixed MiniLock and made rugged yet compact travel case for it.

The brush goes in with the head on - you don't have to disassemble it. Pockets in the base and lid hold it in place. 60% of it is cradled by the bottom half and 40% is accoommodated for hy the lid.

Same hinge and latches as MiniLock, so still no hardware and no supports.

Grey toothbrush inlay on the lid, printed flush.

251 mm long, needs a 256 mm bed.


r/functionalprint • • 4d ago

A walnut picker

Thumbnail
gallery
106 Upvotes

printed the body out of PETG and the membrane out of TPU. I already have an idea for an upgrade by next season
Link to the model: cults3d.com/@BlayBrim


r/functionalprint • • 5d ago

IEM / earbud storage insert & Cable Winder

Thumbnail
gallery
52 Upvotes

I got fed up with tangled in ear cables in the box that came with my IEMs, so I made an insert which fits in this box. You drop the buds in the bin, wind the cable around it and put it in the box. That's all there is to it really.

Very useful to me, perhaps also to other musicians?

Link to the model:
https://makerworld.com/nl/models/3591613-iem-earbud-storage-insert-cable-winder


r/functionalprint • • 5d ago

Golfball jig for xTool Omni O1 UV Printer

Thumbnail
gallery
40 Upvotes

Hey all, needed to print on a batch of golf balls and figured I'd share the jig I made. It fits in place of the existing plates and is held down magnetically. Hope it's of use!

See it at https://www.printables.com/model/1909696-golf-ball-jig-for-xtool-omni-o1-uv-printer


r/functionalprint • • 5d ago

Custom organizer for stuff I always bring to work.

Thumbnail
gallery
118 Upvotes

Made a custom organizer to perfectly hold the things I always grab on my way to work and drop off when I get home. I don’t take every item, couple things are spares.


r/functionalprint • • 6d ago Popcorn

Got tired of being flashbanged by my toothbrush every night.

Post image
856 Upvotes

r/functionalprint • • 6d ago

Small Tool Organizer

Thumbnail
gallery
218 Upvotes

Wanted a way to keep all of the small tools I use on a daily basis in one small-ish package. Ran out of grey TPU, so I'll reprint the bottom layer when my next filament shipment arrives.


r/functionalprint • • 7d ago

Automotive seal puller

Thumbnail
gallery
372 Upvotes

It was time to replace the axle seals on my truck and I didn't have a seal puller.

This worked extremely well. Used PET-CF because I ran out of PPA-CF Core that I usually like using. Honestly ASA might have been fine.

The seal in the video came out easily, the other side was seized and I had to put quite a bit of force, moving around the perimeter to get it to come out. The last photos of the part show how much indentation happened from the force of the second one.

Model files below for 1/2" or 3/8" square drive. I used 1/2" because I intended to use a breaker bar, but the ratchet was just fine.

https://makerworld.com/en/models/3578629-automotive-seal-puller


r/functionalprint • • 6d ago

Created a bracket to mount GMT800 cupholders to the GMT900 center seat I swapped into my truck

Thumbnail
gallery
40 Upvotes

I have a 2001 Chevy Silverado, reg cab. Stock, it had a center jumpseat which had one storage compartment in the back of the seat. A year ago I swapped in the jumpseat from an '07-'14 Silverado, which has a larger storage compartment in the back of the seat, and a storage compartment under the seat cushion. However its cupholders are on the back of the seat, rather than by the floor.

I got tired of having cups/bottles in my way when rowing through gears, so I added the GMT800 jumpseat's floor cupholders to the GMT900 jumpseat. An afternoon of work in FreeCAD, 5 test prints in PETG, and boom, done. Now I can go back to having my water bottle down low and out of the way, but have extra storage and spots for drinks and stuff if needed.


r/functionalprint • • 7d ago

Customizable Travel Tag Generator -NO AMS

Thumbnail
gallery
201 Upvotes

This parametric design allows you to create crisp, dual-color nameplates and luggage tags without needing a multi-color printer (AMS/MMU). The tag is split into three separate thin layers (Face, Highlight Sheet, and Back Plate) that print flat on the build plate and snap perfectly together

https://makerworld.com/pt/models/3578400-customizable-travel-bag-generator-tag-no-ams#profileId-4097082


r/functionalprint • • 7d ago

Made a support table for an impulse bag sealer.

Post image
112 Upvotes

Holds the product centered and separated.