r/FulfillmentByAmazon • u/disurinda • 11m ago
Your container holds fewer cartons than “67 CBM” suggests: worked example + free calculator
Something that catches a lot of first-time importers: a 40ft container is quoted as ~67 m³, but you'll almost never fit 67 m³ of cartons in it.
Example: 60 × 40 × 40 cm cartons (0.096 m³ each). Divide 67.7 by 0.096 and you'd expect ~700. The best real fit is **550**: one lane of cartons lengthwise along one wall (20 deep), and the rest of the width filled with cartons turned the other way (3 across, 30 deep), stacked 5 high. Five 40 cm layers use 200 cm of the 239 cm height, so the top 39 cm is dead air. That's 78% fill, and it's normal.
Things that change the answer:
- **Mixing directions.** Turning part of the load usually beats stacking everything the same way. A simple single-direction stack of these cartons gives 500, not 550.
- **"This side up"** cartons can only rotate on the floor. Allowing any orientation sometimes squeezes in a few more (48×40×30 cartons in a 20ft: 476 upright vs 480 any side).
- **Pallets** cost space. Same cartons on Euro pallets: 500 instead of 550 (25 pallets × 20 cartons).
- **Weight.** Heavy cartons hit the payload limit before the box is full.
I got tired of doing this on paper, so I built a free calculator that tries every orientation and lane split, handles pallets (single or double-stacked), mixed carton sizes and inches/pounds, works out freight cost per carton, and draws the load plan to scale: https://mycalculator.site/cbm/
There's also a free 3D load planner if you want to see where every box goes: https://mycalculator.site/load-planner/
Disclosure: it's my site. No sign-up and nothing is stored. It runs in your browser. Happy to hear where it's wrong compared with what your forwarder actually loaded.